Graco 1050A, 1050H, 1050P, 1050C Mounting, Grounding, Fluid supply container Follow local code

Page 8

Installation

Mounting

•The pump exhaust air may contain contam- inants. Ventilate to a remote area. See Air Exhaust Ventilation on page 10.

•Never move or lift a pump under pressure. If dropped, the fluid section may rupture. Always follow the Pressure Relief Proce- dure on page 15 before moving or lifting the pump.

1.For wall mounting, order Graco Kit 24C637.

2.Be sure the mounting surface can support the weight of the pump, hoses, and acces- sories, as well as the stress caused during operation.

3.For all mountings, be sure the pump is bolted directly to the mounting surface.

4.For ease of operation and service, mount the pump so air valve, air inlet, fluid inlet and fluid outlet ports are easily accessible.

5.Rubber Foot Mounting Kit 236452 is avail- able to reduce noise and vibration during operation.

Grounding

The equipment must be grounded to reduce the risk of static sparking. Static sparking can cause fumes to ignite or explode. Grounding provides an escape wire for the electric current.

Pump: See FIG. 1. Loosen the grounding screw (GS). Insert one end of a 12 ga. minimum ground wire (R) behind the grounding screw and tighten the screw securely. Connect the clamp end of the ground

wire to a true earth ground. A ground wire and clamp, Part 238909, is available from Graco.

Polypropylene and PVDF: Only aluminum, conductive polypropylene, hastelloy, and stainless steel pumps have a ground screw. Standard polypropylene and PVDF pumps are not conductive. Never use a non-conduc- tive polypropylene or PVDF pump with non-conductive flammable fluids. Follow your local fire codes. When pumping conductive flammable fluids, always ground the entire fluid system as described.

GS

R

ti12214a

FIG. 1. Grounding screw and wire

Air and fluid hoses: Use only grounded hoses with a maximum of 500 ft (150 m) com- bined hose length to ensure grounding conti- nuity.

Air compressor: Follow manufacturer’s recommendations.

Fluid supply container: Follow local code.

Solvent pails used when flushing: Follow local code. Use only conductive metal pails, placed on a grounded surface. Do not place the pail on a nonconductive surface, such as paper or cardboard, which interrupts ground- ing continuity.

8

312877P

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Important Safety Instructions 1050P Polypropylene 1050C ConductiveContents Related ManualsTo Specify the Configuration of a New Pump To Order Replacement PartsTo Find Your Nearest Distributor Distributor NoteConfiguration Number Matrix 1050A A01AAtex Certifications II 2 GD c IIC T4Special Conditions for Safe USE Installation Tighten Fasteners Before SetupFluid supply container Follow local code MountingGrounding Air Line Reed SwitchInstallation of Remote Pilot Air Lines Air Exhaust Ventilation To provide a remote exhaustFluid Supply Line Fluid Outlet LineNK L Hastelloy 1050H or Stainless Steel 1050S Fluid Inlet and Outlet PortsAluminum 1050A Fluid Pressure Relief Valve Fluid pressure relief kit Aluminum pumps only, 1050A modelsPressure Relief Procedure Starting and Adjusting the PumpOperation Flush the Pump Before First UseMaintenance Torque Instructions Torque sequenceDimensions and Mounting Aluminum 1050ACenter Flange 16.0 in mm Hastelloy 1050H and Stainless Steel 1050S Air Consumption Performance ChartsFluid Pressure Technical Data Fluid Temperature Range Non-wetted external partsGraco Standard Husky Pump Warranty Graco Information
Related manuals
Manual 32 pages 37.64 Kb

1050P, 1050S, 1050H, 1050C, 1050F specifications

The Graco 1050P is a paint sprayer designed to meet the needs of both professional contractors and DIY enthusiasts. It boasts a range of features and technologies that enhance its performance, efficiency, and ease of use, making it a reliable choice for various painting projects.

One of the standout features of the Graco 1050P is its powerful motor. With a maximum pressure of up to 2800 PSI, this unit is capable of handling thick materials, ensuring a smooth and even application. The robust motor allows users to spray a variety of coatings, including stains, sealers, and even heavy-duty paints, making it versatile for different jobs.

The Graco 1050P incorporates industry-leading Airless Technology, allowing for a high-quality finish without the need for thinning paint. This technology minimizes overspray and ensures that the paint is evenly distributed on the surface, reducing the time needed for touch-ups. The sprayer is equipped with a professional-grade spray gun that enhances control and accuracy, enabling users to achieve precise lines and coverage.

Another important characteristic of this sprayer is its lightweight and portable design. Weighing in at just under 50 pounds, the Graco 1050P is easy to maneuver, making it suitable for both large and small projects. The integrated handle and durable wheels add to its mobility, allowing users to transport it easily around job sites.

The Graco 1050P also features a convenient reversible tip design. This innovation allows users to quickly switch between different spray patterns and sizes, maximizing versatility based on project requirements. If a clog occurs, reversing the tip can clear it instantly, minimizing downtime and maintaining productivity.

For added convenience, the unit is equipped with a durable paint hose that extends up to 75 feet, providing ample reach for those hard-to-reach areas. Its filter system helps keep dirt and debris out of the paint, ensuring a clean application every time.

Safety is a priority with the Graco 1050P, which comes with an easy-to-use pressure relief valve. This feature prevents accidental discharge of paint and enhances user protection while operating the sprayer.

In summary, the Graco 1050P is a feature-packed paint sprayer built for both performance and convenience. Its powerful motor, airless technology, portability, and versatile design make it a top choice for any painting professional or DIYer looking to achieve flawless results.
Top Page Image Contents