Graco 1050S, 1050H, 1050P, 1050A, 1050C, 1050F important safety instructions Technical Data

Page 22

Technical Data

Technical Data

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 psi (0.86 MPa, 8.6 bar)

Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-125 psi (0.14-0.86 MPa, 1.4-8.6 bar) Fluid displacement per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.17 gal. (0.64 liters)

Air consumption at 70 psi (0.48 MPa, 4.8 bar), 20 gpm (76 lpm) . . . . . . . . 25 scfm Maximum values with water as media under submerged inlet

conditions at ambient temperature:

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 scfm Maximum free-flow delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 gpm (189 lpm) Maximum pump speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 cpm Maximum suction lift (varies widely based on ball/seat selection and

wear, operating speed, material properties, and other variables) . . . . . . 16 ft (4.9 m) dry, 29 ft (8.8 m) wet Maximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 in. (3.2 mm)

Recommended cycle rate for continuous use . . . . . . . . . . . . . . . . . . . . . . . 93 - 140 cpm Recommended cycle rate for circulation systems . . . . . . . . . . . . . . . . . . . . 20 cpm Sound Power*

at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . 78 dBa at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . . . . . . . . . . . . . . . . . . . . 90 dBa

Sound Pressure**

at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . 84 dBa at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . . . . . . . . . . . . . . . . . . . . 96 dBa

Fluid temperature range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see page 23 Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f) Fluid inlet size

Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S) . . . . . 1 in. npt(f) or 1 in. bspt Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) . . . 1 in. raised face ANSI/DIN flange

Fluid outlet size

Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S) . . . . . 1 in. npt(f) or 1 in. bspt Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) . . . 1 in. raised face ANSI/DIN flange

Weight

Aluminum (1050A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 lb. (10.5 kg) Conductive Polypropylene (1050C) and Polypropylene (1050P) . . . . . . . 18 lb. (8.2 kg) Hastelloy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 lb. (18.6 kg) PVDF (1050F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 lb (11.8 kg) Stainless Steel (1050S)

with conductive polypropylene center . . . . . . . . . . . . . . . . . . . . . . . 36.3 lb. (16.5 kg) with polypropylene center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 lb. (16.9 kg) with aluminum center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.4 lb. (18.8 kg)

Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction

1050A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum

1050H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hastelloy

1050C and 1050P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene 1050F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PVDF

1050S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless Steel

22

312877P

Image 22
Contents Important Safety Instructions 1050P Polypropylene 1050C ConductiveContents Related ManualsTo Find Your Nearest Distributor To Specify the Configuration of a New PumpTo Order Replacement Parts Distributor NoteConfiguration Number Matrix 1050A A01AAtex Certifications II 2 GD c IIC T4Special Conditions for Safe USE Installation Tighten Fasteners Before SetupGrounding MountingFluid supply container Follow local code Installation of Remote Pilot Air Lines Reed SwitchAir Line Air Exhaust Ventilation To provide a remote exhaustFluid Supply Line Fluid Outlet LineNK L Aluminum 1050A Fluid Inlet and Outlet PortsHastelloy 1050H or Stainless Steel 1050S Fluid Pressure Relief Valve Fluid pressure relief kit Aluminum pumps only, 1050A modelsOperation Pressure Relief ProcedureStarting and Adjusting the Pump Flush the Pump Before First UseMaintenance Torque Instructions Torque sequenceDimensions and Mounting Aluminum 1050ACenter Flange 16.0 in mm Hastelloy 1050H and Stainless Steel 1050S Fluid Pressure Performance ChartsAir Consumption Technical Data Fluid Temperature Range Non-wetted external partsGraco Standard Husky Pump Warranty Graco Information
Related manuals
Manual 32 pages 37.64 Kb

1050P, 1050S, 1050H, 1050C, 1050F specifications

The Graco 1050P is a paint sprayer designed to meet the needs of both professional contractors and DIY enthusiasts. It boasts a range of features and technologies that enhance its performance, efficiency, and ease of use, making it a reliable choice for various painting projects.

One of the standout features of the Graco 1050P is its powerful motor. With a maximum pressure of up to 2800 PSI, this unit is capable of handling thick materials, ensuring a smooth and even application. The robust motor allows users to spray a variety of coatings, including stains, sealers, and even heavy-duty paints, making it versatile for different jobs.

The Graco 1050P incorporates industry-leading Airless Technology, allowing for a high-quality finish without the need for thinning paint. This technology minimizes overspray and ensures that the paint is evenly distributed on the surface, reducing the time needed for touch-ups. The sprayer is equipped with a professional-grade spray gun that enhances control and accuracy, enabling users to achieve precise lines and coverage.

Another important characteristic of this sprayer is its lightweight and portable design. Weighing in at just under 50 pounds, the Graco 1050P is easy to maneuver, making it suitable for both large and small projects. The integrated handle and durable wheels add to its mobility, allowing users to transport it easily around job sites.

The Graco 1050P also features a convenient reversible tip design. This innovation allows users to quickly switch between different spray patterns and sizes, maximizing versatility based on project requirements. If a clog occurs, reversing the tip can clear it instantly, minimizing downtime and maintaining productivity.

For added convenience, the unit is equipped with a durable paint hose that extends up to 75 feet, providing ample reach for those hard-to-reach areas. Its filter system helps keep dirt and debris out of the paint, ensuring a clean application every time.

Safety is a priority with the Graco 1050P, which comes with an easy-to-use pressure relief valve. This feature prevents accidental discharge of paint and enhances user protection while operating the sprayer.

In summary, the Graco 1050P is a feature-packed paint sprayer built for both performance and convenience. Its powerful motor, airless technology, portability, and versatile design make it a top choice for any painting professional or DIYer looking to achieve flawless results.