Graco 1050C, 1050H, 1050P, 1050A, 1050S Reed Switch, Installation of Remote Pilot Air Lines

Page 9

Check your system electrical continuity after the initial installation, and then set up a regular schedule for checking continuity to be sure proper grounding is maintained.

Air Line

See FIG. 4, page 12.

1.Install an air regulator (C) and gauge to control the fluid pressure. The fluid stall pressure will be the same as the setting of the air regulator.

2.Locate a bleed-type master air valve (B) close to the pump and use it to relieve trapped air. Be sure the valve is easily accessible from the pump and located downstream from the regulator.

Installation

Installation of Remote Pilot Air Lines

NOTICE

Pilot supply pressure should not exceed

25-50% of main air supply pressure. If pilot supply pressure is too high, the pump could leak air or exhaust excessive air at stall.

1.Connect an air supply line to the pump (A, FIG. 3, page 10).

2.Insert 5/32 OD tubing into the push-to-con- nect fitting on each pilot valve (113).

3.Connect remaining ends of tubes to exter- nal air signal, such as Graco’s CycleFlo™ (PN 195264) or CycleFlo II (PN 195265) controllers.

Trapped air can cause the pump to cycle unexpectedly, which could result in serious injury from splashing.

3.Locate another master air valve (E) upstream from all air line accessories and use it to isolate them during cleaning and repair.

4.An air line filter (F) removes harmful dirt and moisture from the compressed air supply.

5.Install a grounded, flexible air hose (A) between the accessories and the 1/2 npt(f) pump air inlet (D). Use a minimum 3/8 in. (10 mm) ID air hose.

113

113

Graco

CycleFlo

ti16894a

FIG. 2. Connect Remote Air Control

Reed Switch

Pulse Count models are intended for use with customer-supplied fluid management or inven- tory tracking systems. Attach an M12, 5-pin female cable to connect the reed switch to your data monitoring system. See Manual 406824.

312877P

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 1050P Polypropylene 1050C Conductive Important Safety InstructionsRelated Manuals ContentsTo Order Replacement Parts To Specify the Configuration of a New PumpTo Find Your Nearest Distributor Distributor Note1050A A01A Configuration Number MatrixII 2 GD c IIC T4 Atex CertificationsSpecial Conditions for Safe USE Tighten Fasteners Before Setup InstallationMounting GroundingFluid supply container Follow local code Reed Switch Installation of Remote Pilot Air LinesAir Line To provide a remote exhaust Air Exhaust VentilationFluid Outlet Line Fluid Supply LineNK L Fluid Inlet and Outlet Ports Aluminum 1050AHastelloy 1050H or Stainless Steel 1050S Fluid pressure relief kit Aluminum pumps only, 1050A models Fluid Pressure Relief ValveStarting and Adjusting the Pump Pressure Relief ProcedureOperation Flush the Pump Before First UseMaintenance Torque sequence Torque InstructionsAluminum 1050A Dimensions and MountingCenter Flange 16.0 in mm Hastelloy 1050H and Stainless Steel 1050S Performance Charts Fluid PressureAir Consumption Technical Data Non-wetted external parts Fluid Temperature RangeGraco Information Graco Standard Husky Pump Warranty
Related manuals
Manual 32 pages 37.64 Kb

1050P, 1050S, 1050H, 1050C, 1050F specifications

The Graco 1050P is a paint sprayer designed to meet the needs of both professional contractors and DIY enthusiasts. It boasts a range of features and technologies that enhance its performance, efficiency, and ease of use, making it a reliable choice for various painting projects.

One of the standout features of the Graco 1050P is its powerful motor. With a maximum pressure of up to 2800 PSI, this unit is capable of handling thick materials, ensuring a smooth and even application. The robust motor allows users to spray a variety of coatings, including stains, sealers, and even heavy-duty paints, making it versatile for different jobs.

The Graco 1050P incorporates industry-leading Airless Technology, allowing for a high-quality finish without the need for thinning paint. This technology minimizes overspray and ensures that the paint is evenly distributed on the surface, reducing the time needed for touch-ups. The sprayer is equipped with a professional-grade spray gun that enhances control and accuracy, enabling users to achieve precise lines and coverage.

Another important characteristic of this sprayer is its lightweight and portable design. Weighing in at just under 50 pounds, the Graco 1050P is easy to maneuver, making it suitable for both large and small projects. The integrated handle and durable wheels add to its mobility, allowing users to transport it easily around job sites.

The Graco 1050P also features a convenient reversible tip design. This innovation allows users to quickly switch between different spray patterns and sizes, maximizing versatility based on project requirements. If a clog occurs, reversing the tip can clear it instantly, minimizing downtime and maintaining productivity.

For added convenience, the unit is equipped with a durable paint hose that extends up to 75 feet, providing ample reach for those hard-to-reach areas. Its filter system helps keep dirt and debris out of the paint, ensuring a clean application every time.

Safety is a priority with the Graco 1050P, which comes with an easy-to-use pressure relief valve. This feature prevents accidental discharge of paint and enhances user protection while operating the sprayer.

In summary, the Graco 1050P is a feature-packed paint sprayer built for both performance and convenience. Its powerful motor, airless technology, portability, and versatile design make it a top choice for any painting professional or DIYer looking to achieve flawless results.
Top Page Image Contents