Graco 1050S, 1050H, 1050P, 1050A, 1050C, 1050F important safety instructions Maintenance

Page 16

Maintenance

10.If you are flushing, run the pump long enough to thoroughly clean the pump and hoses.

11.Close the dispensing valve, if used.

12.Close the bleed-type master air valve.

13.Pumps with runaway protection: Disable the prime/flush function by pushing the prime/flush button on the DataTrak.

DataTrak Operation

See DataTrak manual 313840 for all DataTrak information and parts, including detailed oper- ation instructions.

Pump Shutdown

At the end of the work shift and before you check, adjust, clean or repair the system, fol- low Pressure Relief Procedure, page 15.

Maintenance

Maintenance Schedule

Establish a preventive maintenance schedule, based on the pump’s service history. Sched- uled maintenance is especially important to prevent spills or leakage due to diaphragm failure.

Lubrication

The pump is lubricated at the factory. It is designed to require no further lubrication for the life of the pump. There is no need to add an inline lubricator under normal operating conditions.

Tighten Threaded Connections

Before each use, check all hoses for wear or damage and replace as necessary. Check to be sure all threaded connections are tight and leak-free. Check fasteners. Tighten or retorque as necessary. Although pump use varies, a general guideline is to retorque fasteners every two months. See Torque Instructions, page 17.

Flushing and Storage

Flush before fluid can dry in the equipment, at the end of the day, before storing, and before repairing equipment.

Flush at the lowest pressure possible. Check connectors for leaks and tighten as necessary.

Flush with a fluid that is compatible with the fluid being dispensed and the equipment wetted parts.

Flush the pump often enough to prevent the fluid you are pumping from drying or freezing in the pump and damaging it. Use a compati- ble solvent.

Always flush the pump and relieve the pres- sure before storing it for any length of time.

16

312877P

Image 16
Contents Important Safety Instructions 1050P Polypropylene 1050C ConductiveContents Related ManualsTo Specify the Configuration of a New Pump To Order Replacement PartsTo Find Your Nearest Distributor Distributor NoteConfiguration Number Matrix 1050A A01AAtex Certifications II 2 GD c IIC T4Special Conditions for Safe USE Installation Tighten Fasteners Before SetupGrounding MountingFluid supply container Follow local code Installation of Remote Pilot Air Lines Reed SwitchAir Line Air Exhaust Ventilation To provide a remote exhaustFluid Supply Line Fluid Outlet LineNK L Aluminum 1050A Fluid Inlet and Outlet PortsHastelloy 1050H or Stainless Steel 1050S Fluid Pressure Relief Valve Fluid pressure relief kit Aluminum pumps only, 1050A modelsPressure Relief Procedure Starting and Adjusting the PumpOperation Flush the Pump Before First UseMaintenance Torque Instructions Torque sequenceDimensions and Mounting Aluminum 1050ACenter Flange 16.0 in mm Hastelloy 1050H and Stainless Steel 1050S Fluid Pressure Performance ChartsAir Consumption Technical Data Fluid Temperature Range Non-wetted external partsGraco Standard Husky Pump Warranty Graco Information
Related manuals
Manual 32 pages 37.64 Kb

1050P, 1050S, 1050H, 1050C, 1050F specifications

The Graco 1050P is a paint sprayer designed to meet the needs of both professional contractors and DIY enthusiasts. It boasts a range of features and technologies that enhance its performance, efficiency, and ease of use, making it a reliable choice for various painting projects.

One of the standout features of the Graco 1050P is its powerful motor. With a maximum pressure of up to 2800 PSI, this unit is capable of handling thick materials, ensuring a smooth and even application. The robust motor allows users to spray a variety of coatings, including stains, sealers, and even heavy-duty paints, making it versatile for different jobs.

The Graco 1050P incorporates industry-leading Airless Technology, allowing for a high-quality finish without the need for thinning paint. This technology minimizes overspray and ensures that the paint is evenly distributed on the surface, reducing the time needed for touch-ups. The sprayer is equipped with a professional-grade spray gun that enhances control and accuracy, enabling users to achieve precise lines and coverage.

Another important characteristic of this sprayer is its lightweight and portable design. Weighing in at just under 50 pounds, the Graco 1050P is easy to maneuver, making it suitable for both large and small projects. The integrated handle and durable wheels add to its mobility, allowing users to transport it easily around job sites.

The Graco 1050P also features a convenient reversible tip design. This innovation allows users to quickly switch between different spray patterns and sizes, maximizing versatility based on project requirements. If a clog occurs, reversing the tip can clear it instantly, minimizing downtime and maintaining productivity.

For added convenience, the unit is equipped with a durable paint hose that extends up to 75 feet, providing ample reach for those hard-to-reach areas. Its filter system helps keep dirt and debris out of the paint, ensuring a clean application every time.

Safety is a priority with the Graco 1050P, which comes with an easy-to-use pressure relief valve. This feature prevents accidental discharge of paint and enhances user protection while operating the sprayer.

In summary, the Graco 1050P is a feature-packed paint sprayer built for both performance and convenience. Its powerful motor, airless technology, portability, and versatile design make it a top choice for any painting professional or DIYer looking to achieve flawless results.