Berkley B4ZRKS, B3TRKS, B2ZRKL, B2XRKS owner manual Not Recommended

Page 9

Installation

Suction Connection

Suction Lift

Do not use

Concentric

Reducer.

No support or uneven mounting not recommended.

Excess use of pipe fittings means potential air leaks.

Elbow immediately in front of pump intake not recommended.

Concentric Reducer causes high spots

along the suction line resulting in air pockets.

Do not install valves in suction line.

Unsupported pipe causes excessive stress

on pump and fittings.

Long run

not recommended

Pipe diameter

("D") undersized

reduces performance

High suction lift should be avoided.

Vortex caused by insufficient submergence may cause pump to lose prime.

Suction pipe sloping downward to pump inlet will trap air which will reduce performance and may cause pump to lose prime.

Suction piping that is undersized will create excess friction losses that may cause cavitation and a reduction in pump performance.

Excess fittings and bends in suction line results in trapped air, reduced performance, and high friction losses which may cause cavitation.

 

 

Less than

 

 

4 x "D"

No strainer

 

 

 

may cause

 

 

 

 

 

 

pump to

 

 

 

clog.

Insufficient bottom

 

clearance

Not Recommended

F00633

Page 9

Image 9
Contents Self Prime Frame Mounted Centrifugal Pump General Information Read and Follow Safety InstructionsPump Location LocationDischarge Piping Suction PipingPiping Electrical ConnectionPump Foundation Typical InstallationsShaft Alignment Direct Coupling DriveAlignment of Pump and Motor Shaft Course AlignmentAlignment/Proper Belt Tension Belt DriveAlignment TensionMounting Hydraulic Motor and Adapter Electric Motor / Hydraulic MotorSuction Lift Suction ConnectionNot Recommended Pressure When Flooded Suction ExistsWater under Pressure Align piping to minimize flange stress Discharge ConnectionDo not force alignment that can cause flange stresses Priming Check RotationElectric Motors Engine DrivenLubrication Observational MaintenancePerformance Check RepackingPacking Ring Replacement Installing New RingsRemoval General Pump Care Berkeley Pumps Ordering Replacement PartsParts Breakdown Self Prime Bearing FrameElectrical Drive Pumps TroubleshootingEngine Drive Pumps Probable Cause Symptom Group Engine Mechanical SystemQuarterly Inspection III. Quarterly Inspection Routine InspectionII. Quarterly Inspection IV. Quarterly InspectionMaintenance General Terms and Conditions Warranty

B2XRKS, B2ZRKL, B3TRKS, B4ZRKS specifications

The Berkley B2XRKS, B2ZRKL, B3TRKS, and B4ZRKS are innovative fishing rods designed to enhance the angling experience for both novice and experienced anglers. These rods are renowned for their performance, durability, and advanced technologies, making them stand out in the marketplace.

The B2XRKS model incorporates a lightweight yet robust construction that allows for excellent casting accuracy and control. Made from high-quality materials, this rod features a sensitive tip to detect even the slightest nibble, enhancing the chances of a successful catch. The ergonomic handle provides comfort during long fishing sessions, minimizing fatigue and improving grip.

Berkley's B2ZRKL is tailored specifically for versatility in various fishing scenarios. Its medium to heavy power rating accommodates different fishing techniques, from bass to trout. The rod's backbone offers enough strength to handle larger fish, while still maintaining the sensitivity required for finesse presentations. This model is equipped with high-performance guides that promote smoother line flow, reducing friction and enhancing casting distance.

The B3TRKS model takes innovation a step further by integrating cutting-edge anti-tangle technology. This feature dramatically reduces the chances of line tangles, allowing anglers to focus solely on their fishing. Additionally, the B3TRKS is designed with a seamless blank construction, enhancing durability and performance. The rod’s lightweight design does not compromise its strength, making it ideal for extended use.

Lastly, the B4ZRKS model stands out for its advanced construction methodologies. Utilizing a unique blend of materials, this rod achieves an optimal balance of weight and power. It features a precision-molded tip, providing unparalleled sensitivity and responsiveness. The B4ZRKS also benefits from a specialized grip system that ensures a secure hold even in wet conditions, enhancing performance during challenging weather.

In summary, the Berkley B2XRKS, B2ZRKL, B3TRKS, and B4ZRKS rods offer a range of features that cater to various fishing styles and preferences. Their incorporation of advanced technologies and premium materials ensures that anglers can rely on these rods for both performance and durability. Whether casting for bass or reeling in trout, these rods are designed to maximize the fishing experience, making them an excellent choice for any angler looking to improve their craft.