Berkley B2ZRKL, B3TRKS, B4ZRKS, B2XRKS owner manual Belt Drive, Alignment/Proper Belt Tension

Page 6

Installation

Belt Drive

Alignment/Proper Belt Tension

A Incorrect

Centerline - A of each shaft and pulley must be parallel for proper alignment.

B

B

Incorrect

Centerline - B represents center of belt and pulley.This centerline must be straight for proper alignment.

Centerline

AB

B

2113 1095

Centerline

A

ALIGNMENT

Drive belt can catch and trap clothing or body. Belt guard must ALWAYS be in place when pump is running. Belt guard is not shown for

pictorial clarity.

• Drive and pump shaft centerlines (A) must be parallel

as shown. Belt centerlines (B) must be straight as

shown.

• When installing belts, move the driver toward the

pump to allow belts to be placed on pulley. Then,

move the driver away from pump to obtain proper belt

NOTICE: Belts must be tight enough to prevent slip- ping during operation. Loose belts result in early belt failure and reduced performance. However, excessive tightness of belts will result in overheating of the belts and excessive bearing load in the pump and driver.

Most Vee-belts will stretch slightly after initial installation. After a short period of operation, re- check belt tension and adjust as necessary.

Center of span.

tension as described below.

TENSION

• Multiple belt spans must be equal tension in all belts.

Proper belt tension varies with the size of belt being

used, however a general rule is:

Belts are properly tensioned when one belt can be

depressed one belt thickness at the center of the

span when pressing with thumb.

Another method is that a properly tensioned belt can

be rotated (twisted) one-quarter revolution at the

 

A

1423 1294

A

Slack should not be more than one belt thickness.

Proper tension allows one- quarter revolution of belt.

center of span.

View A-A

Page 6

F00633

Image 6
Contents Self Prime Frame Mounted Centrifugal Pump Pump Location Read and Follow Safety InstructionsGeneral Information LocationPiping Suction PipingDischarge Piping Electrical ConnectionTypical Installations Pump FoundationAlignment of Pump and Motor Shaft Direct Coupling DriveShaft Alignment Course AlignmentAlignment Belt DriveAlignment/Proper Belt Tension TensionElectric Motor / Hydraulic Motor Mounting Hydraulic Motor and AdapterSuction Connection Suction LiftNot Recommended When Flooded Suction Exists PressureWater under Pressure Discharge Connection Align piping to minimize flange stressDo not force alignment that can cause flange stresses Electric Motors Check RotationPriming Engine DrivenPerformance Check Observational MaintenanceLubrication RepackingPacking Ring Replacement Installing New RingsRemoval General Pump Care Ordering Replacement Parts Berkeley PumpsSelf Prime Bearing Frame Parts BreakdownTroubleshooting Electrical Drive PumpsProbable Cause Symptom Group Engine Mechanical System Engine Drive PumpsII. Quarterly Inspection Routine InspectionQuarterly Inspection III. Quarterly Inspection IV. Quarterly InspectionMaintenance Warranty General Terms and Conditions

B2XRKS, B2ZRKL, B3TRKS, B4ZRKS specifications

The Berkley B2XRKS, B2ZRKL, B3TRKS, and B4ZRKS are innovative fishing rods designed to enhance the angling experience for both novice and experienced anglers. These rods are renowned for their performance, durability, and advanced technologies, making them stand out in the marketplace.

The B2XRKS model incorporates a lightweight yet robust construction that allows for excellent casting accuracy and control. Made from high-quality materials, this rod features a sensitive tip to detect even the slightest nibble, enhancing the chances of a successful catch. The ergonomic handle provides comfort during long fishing sessions, minimizing fatigue and improving grip.

Berkley's B2ZRKL is tailored specifically for versatility in various fishing scenarios. Its medium to heavy power rating accommodates different fishing techniques, from bass to trout. The rod's backbone offers enough strength to handle larger fish, while still maintaining the sensitivity required for finesse presentations. This model is equipped with high-performance guides that promote smoother line flow, reducing friction and enhancing casting distance.

The B3TRKS model takes innovation a step further by integrating cutting-edge anti-tangle technology. This feature dramatically reduces the chances of line tangles, allowing anglers to focus solely on their fishing. Additionally, the B3TRKS is designed with a seamless blank construction, enhancing durability and performance. The rod’s lightweight design does not compromise its strength, making it ideal for extended use.

Lastly, the B4ZRKS model stands out for its advanced construction methodologies. Utilizing a unique blend of materials, this rod achieves an optimal balance of weight and power. It features a precision-molded tip, providing unparalleled sensitivity and responsiveness. The B4ZRKS also benefits from a specialized grip system that ensures a secure hold even in wet conditions, enhancing performance during challenging weather.

In summary, the Berkley B2XRKS, B2ZRKL, B3TRKS, and B4ZRKS rods offer a range of features that cater to various fishing styles and preferences. Their incorporation of advanced technologies and premium materials ensures that anglers can rely on these rods for both performance and durability. Whether casting for bass or reeling in trout, these rods are designed to maximize the fishing experience, making them an excellent choice for any angler looking to improve their craft.