Chicago Electric 94649 operating instructions

Page 3

8.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

9.Use eye and ear protection. Always wear ANSI approved impact safety goggles.

10.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames.

11.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.

12.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.

13.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

14.Use proper power outlet. This pump has a three prong plug. The third prong (round) is the ground. Plug the pump cord only into a three-prong, Ground Fault Circuit Interrupter receptacle. Cutting off the ground prong will result in a safety hazard and void the warranty.

15.Using Extension Cords. An extension cord up to 50 feet must have a wire size of 18 AWG; up to 100 feet must have a wire size of 16 AWG. Do not submerge extension cords or make contact with water. Note: Do not make the extension cord connection underwater.

16.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended.

17.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

18.Pacemaker safety warning. People with pacemakers should consult with their physician(s) before using this product; operation of equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SKU 94649

Page

Image 3
Contents 94649 Specifications Safety Warnings and PrecautionsSave This Manual Page Operation UnpackingOFF Maintenance TroubleshootingPart Description ’ty Parts ListPlease Read the Following Carefully Assembly DrawingLimited 90 DAY Warranty