Instructions for the user
7.3.3 Removing the self-cleaning panels
Remove all the accessories from the oven and carry out the following operations:
1Remove the side racks (fig.1);
2Slide out the side panels “F” and “G” (fig. 2);
3Extract the rear panel “A” after first unscrewing the threaded rings “C” (fig. 2);
4Reassemble the panels by returning them to their original conditions.
1)
2)
7.4 Removing the door
7.4.1 With type 1 movable levers
With the door completely open, lift the levers A until they touch the hinges B and take hold of the two sides of the door with both hands close to the hinges. Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, then lower the levers A.
55
