Smeg SC709X Positioning the oven, Avoid exerting too much pressure on the oven door when open

Instructions for the installer

2.2 Positioning the oven

The oven is designed for mounting into any piece of furniture as long as it is heat-resistant. Proceed according to the dimensions shown in Figures 1, 2 and 3. For installing under a work top, follow the dimensions given in Figure 1-3. For installing under a work top with combined cooking hobs, ensure a minimum clearance from any side walls of at least 110 mm as shown in Figure 1. When installing in tall units, comply with the dimensions shown in figure 1-2, bearing in mind that the top/rear of the unit must have an opening 80-90 mm deep. Tighten the 4 screws A inside the frame (fig. 1).

For installing beneath a countertop hob, allow for a rear and bottom clearance as shown in Figure 1 (ref. B). See the relevant instructions for fitting and securing the hob.

Never use the oven door to lever the oven into place when fitting.

Avoid exerting too much pressure on the oven door when open.

36