8
A
9
10
D
11
12
B
C
D
E
E
Empty the recovery tank
Unplug carpet cleaner from electrical outlet.
An automatic
the recovery tank.
You will know the tank needs to be emptied
• The amount of dirty water has reached the full line
(A).
• When the motor sound rises in pitch.
• You do not see dirty solution coming up through the nozzle.
• The float (B) inside the recovery tank has risen to the top of the tank (Fig. 8).
✓ Press button (C) and remove tank (Fig. 9).
Release latches (D) on tank cap and remove cap (Fig. ✓ 10).
✓ Empty tank.
✓ Replace cap (Fig. 11). Secure both latches (D) (Fig. 10). For full suction, it is important that the recovery tank cap is properly secured before cleaning.
Remove any debris that has collected on lint filter (E) ✓ on cleaner body (Fig. 12 and inset).
Place bottom of tank onto cleaner. Pivot top of tank ✓ and snap in place (Fig. 12).
6