Nilfisk-ALTO 586, 571 manual Rear Squeegee Blade Replacement, Cleaning the Vacuum Hoses

Page 26

Maintenance

Rear Squeegee Blade Replacement

If the rear squeegee blade is worn and does not dry the floor well, follow this procedure:

1.Remove the squeegee assembly from the machine.

2.Remove the squeegee blade and inspect it.

3.Rotate the squeegee blade to obtain a new cleaning edge. Replace if necessary.

4.Reinstall the squeegee blade.

5.Reinstall the squeegee assembly on the machine.

6.Readjust the settings on the squeegee as required (see “How to Adjust Squeegee”).

Squeegee Maintenance

The squeegee blade may be rotated for longer life. Keep sharp corner on floor for best cleaning results. See figure 40. To rotate follow this procedure:

1.Remove Clamp.

2.Remove blade and rotate to new edge.

3.Replace squeegee.

4.Replace clamp.

Cleaning the Vacuum Hoses

Make sure the squeegee is over a suitable drain.

1.Use a water hose to flush through the recovery hoses.

2.Side Squeegee - Position water hose to the squee- gee side of the hose and flush thoroughly.

3.Recovery Hose - Position water hose

inside recovery tank. Recovery hose is located behind threaded lip (see figure 40, A). NOTE: Do not place hose in vacuum intake tube (see figure 41, B), dam- age will occur.

Figure 40

A B

Figure 41

Page -26-

Form No. 71274A

Nilfisk ALTO Operator’s Manual - SCRUBTEC R Manual Steering

Page 25 Page 27
Image 26
Page 25 Page 27
Contents English Instructions For Use 30-72Table of Contents Operator Safety Instructions Nilfisk Alto Operator’s Manual Scrubtec R Manual Steering Introduction Introduction & Machine SpecificationsSymbols Used On Scrubtec R Display Screens For Scrubtec R Machine Control Panel Machine Controls and Features How to Unpack the Machine How To Prepare the Machine For OperationHow To Handle the Packed Machine How to Install the BatteriesBattery Maintenance Correct FillRecharging the Batteries How to Charge the BatteriesShown with Optional Chemical Mixing Sytem Level Indicators for the Charge of the Batteries How To Install the SqueegeeHow To Change or Rotate Brushes on Cylindrical Brush Head How To Install The Brush Or Pad on the Boost machine How To Remove The Brush Or Pad on the Boost machineHow To Operate The Machine Seat Adjustment DeluxeHow to Read the Battery Meter see figure 21, a ScreenHow to Operate the Brush Pressure How to Operate the Squeegee and the Vacuum MotorHow to Operate the Solution Flow Operating the Machine How to Operate the Forward / Reverse Switch see figureHow to Fill the Solution Tank To traverse the machine follow this procedure Do These Procedures When You Begin Your Work PeriodHow to Clean a Floor How to Clean a Very Dirty Floor Do These Procedures When You End Your Work PeriodHow To Operate the Machine Maintenance Cleaning the Recovery Tank and FilterVac Assisted Solution Tank Drain Cleaning the Solution Tank and FilterManually Draining the Solution Tank Squeegee MaintenanceRear Squeegee Blade Replacement Cleaning the Vacuum HosesHOW to Correct Problems in the Machine Cause Action Cause Action Scrubtec R Scrubtec R 571 C Final Assembly Qty Description Rotary Cyl Boost See Detail a Ref. No Qty Description See Detail a Main Frame Assy Cylindrical Main Frame Assy Boost Main Frame Assy Boost Nilfisk Alto Scrubtec R 571 Optional Side Squeegee Lift Assembly Parts List 5/05 Description QtyNilfisk Alto Scrubtec R 571, 586, 571 C, Boost R 1611 2514 Recovery Tank Assembly Nut, Drain Valve 44 31 Solution Tank ASSEMBLY-1 Solution Tank ASSEMBLY-2 Solution Tank ASSEMBLY-2 Steering Column Assy Steering Column Assy 1A, 1B, 1C Nilfisk Alto1A, 1B, 1C 20 19 18 17 AssembledView Cylindrical Head Assembly Parts List 1/11 Drawing #10962A Inch Boost Head Assy Bushing-Flex Plate Note 1, TSBCL2010-12 Shield Boost Bearing Note 1, TSBCL2010-12, NoteKit-Flex Plate 32 Note 1, TSBCL2010-12 Squeegee Assembly 81cm Squeegee Assembly 81cm Squeegee Assembly 99cm Squeegee Assembly 99cm Squeegee Assembly 104cm Squeegee Assembly 104cm Front Squeegee Assy Rotary Machines only Qty DescriptionFront Squeegee ARM Assy Rotary Machines only Nilfisk Alto Scrubtec R 571, 586, 571 C, Boost R Qty Description Electrical Connection Diagram 9/06 PagesNilfisk Alto -68- Form No a Page Nilfisk Alto Operator’s Manual Scrubtec R Manual Steering Page Scrubtec R 586 Disc Model Scrubtec R 571 Disc ModelDeleted Scrubtec R 571 C Cylindrical ModelPage Page
Related manuals
Manual 72 pages 47.09 Kb

586, 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.
Top Page Image Contents