Nilfisk-ALTO 586, 571 manual Maintenance, Cleaning the Recovery Tank and Filter

Page 24

Maintenance

Maintenance To Be Done Every Week

WARNING: Maintenance and repairs must be done by

authorized personnel only.

Always empty the solution tank and the recovery tank before doing

any maintenance. Keep all fasteners tight.

WARNING: Always wear eye protection and protective clothing when working

near batteries. NO SMOKING! Do not put tools or other metal objects

across the battery terminals or the tops of the batteries.

CAUTION: To prevent damage to the machine, and discharge across the tops

of the batteries, do not fill the batteries above the bottom of the tube

in each cell. Wipe any acid from the ma- chine or the tops of the batteries.

Do not add acid to batteries after installa- tion.

Battery Inspection and Cleaning

1.Turn the key switch to the “OFF” position.

2.To inspect batteries, rotate seat support forward. Lift and rotate recovery tank. Be sure the recovery tank is empty before lifting.

3.Disconnect the batteries. Use a cloth and a solution of ammonia or bicarbonate of soda to wipe the top of the batteries. Clean the battery terminals. Reconnect the batteries. See the instructions in the section of this book called “Battery Maintenance”.

4.When battery inspection is completed, close the recovery tank. Rotate the seat support back to the operating posi- tion.

Cleaning the Recovery Tank and Filter

1.Turn the key switch to the “OFF” position.

2.Empty the recovery tank using the flexible drain hose by unscrewing the knob and taking off the plug (see figure 36).

3.If the machine is equipped with the optional clean-out port, open the lower cleaning port cover by unscrewing the four knobs (see figure 37). NOTE: Make sure that the tank is empty first.

4.Rinse the tank and clean the drain plug.

Figure 36

Figure 37

Page -24-

Form No. 71274A

Nilfisk ALTO Operator’s Manual - SCRUBTEC R Manual Steering

Page 23 Page 25
Image 24
Page 23 Page 25
Contents English Instructions For Use 30-72Table of Contents Operator Safety Instructions Nilfisk Alto Operator’s Manual Scrubtec R Manual Steering Introduction Introduction & Machine SpecificationsSymbols Used On Scrubtec R Display Screens For Scrubtec R Machine Control Panel Machine Controls and Features How To Prepare the Machine For Operation How To Handle the Packed MachineHow to Unpack the Machine How to Install the BatteriesBattery Maintenance Correct FillHow to Charge the Batteries Shown with Optional Chemical Mixing SytemRecharging the Batteries Level Indicators for the Charge of the Batteries How To Install the SqueegeeHow To Change or Rotate Brushes on Cylindrical Brush Head How To Install The Brush Or Pad on the Boost machine How To Remove The Brush Or Pad on the Boost machineHow To Operate The Machine Seat Adjustment DeluxeHow to Read the Battery Meter see figure 21, a ScreenHow to Operate the Squeegee and the Vacuum Motor How to Operate the Solution FlowHow to Operate the Brush Pressure How to Operate the Forward / Reverse Switch see figure How to Fill the Solution TankOperating the Machine To traverse the machine follow this procedure Do These Procedures When You Begin Your Work PeriodHow to Clean a Floor How to Clean a Very Dirty Floor Do These Procedures When You End Your Work PeriodHow To Operate the Machine Maintenance Cleaning the Recovery Tank and FilterCleaning the Solution Tank and Filter Manually Draining the Solution TankVac Assisted Solution Tank Drain Squeegee MaintenanceRear Squeegee Blade Replacement Cleaning the Vacuum HosesHOW to Correct Problems in the Machine Cause Action Cause Action Scrubtec R Scrubtec R 571 C Final Assembly Qty Description Rotary Cyl Boost See Detail a Ref. No Qty Description See Detail a Main Frame Assy Cylindrical Main Frame Assy Boost Main Frame Assy Boost Nilfisk Alto Scrubtec R 571 Optional Side Squeegee Lift Assembly Parts List 5/05 Description QtyNilfisk Alto Scrubtec R 571, 586, 571 C, Boost R 1611 2514 Recovery Tank Assembly Nut, Drain Valve 44 31 Solution Tank ASSEMBLY-1 Solution Tank ASSEMBLY-2 Solution Tank ASSEMBLY-2 Steering Column Assy Steering Column Assy 1A, 1B, 1C Nilfisk Alto1A, 1B, 1C 20 19 18 17 AssembledView Cylindrical Head Assembly Parts List 1/11 Drawing #10962A Inch Boost Head Assy Shield Boost Bearing Note 1, TSBCL2010-12, Note Kit-Flex Plate 32 Note 1, TSBCL2010-12Bushing-Flex Plate Note 1, TSBCL2010-12 Squeegee Assembly 81cm Squeegee Assembly 81cm Squeegee Assembly 99cm Squeegee Assembly 99cm Squeegee Assembly 104cm Squeegee Assembly 104cm Front Squeegee Assy Rotary Machines only Qty DescriptionFront Squeegee ARM Assy Rotary Machines only Nilfisk Alto Scrubtec R 571, 586, 571 C, Boost R Qty Description Electrical Connection Diagram 9/06 PagesNilfisk Alto -68- Form No a Page Nilfisk Alto Operator’s Manual Scrubtec R Manual Steering Page Scrubtec R 571 Disc Model DeletedScrubtec R 586 Disc Model Scrubtec R 571 C Cylindrical ModelPage Page
Related manuals
Manual 72 pages 47.09 Kb

586, 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.
Top Page Image Contents