Nilfisk-ALTO 571, 586 manual HOW to Correct Problems in the Machine Cause Action

Page 27

HOW TO CORRECT PROBLEMS IN THE MACHINE

PROBLEM

CAUSE

ACTION

 

 

 

 

nsufficient water onto the brushes

The solution flow is not set

Make sure the solution flow is set.

 

There is no water in the solution tank.

Fill the solution tank.

 

The solution filter is dirty.

Clean the solution filter.

 

A circuit breaker has tripped.

Reset the circuit breaker.

 

Insufficient flow.

Increase flow with solution switch.

 

 

 

 

The machine does not clean

The brushes are worn.

Check the brushes and replace if necessary.

satisfactorily

 

(the brushes have to be replaced when the

 

bristles reach approximately .59 inches (15mm

 

 

 

 

height.)

 

Need to use a different kind of brush/pad

Use a different kind of brush. For cleaning opera-

 

 

tions on floors where the dirt proves to be par-

 

 

ticularly resistant, we recommend using special

 

 

brushes. See Accessories page.

 

 

 

 

The squeegee does not dry the floor

The squeegee is dirty.

Clean the squeegee.

 

Recovery drain hose is not closed.

Close the drain plug.

 

The suction hoses need to be cleaned.

Clean the vacuum hoses. See “Routine Mainte-

 

 

nance” section.

 

The squeegee blades are worn.

Replace/ or rotate the squeegee blades. See

 

 

“Routine Maintenance” section.

 

The recovery tank is full.

Drain recovery tank.

 

 

 

 

The vacuum motor does not function

The squeegee up/down switch in not in the low or

Put the squeegee in the low or middle position or

 

middle position.

reprogram “one touch”.

 

 

 

 

The machine does not start

The operator is not properly seated.

The operator must be properly seated in the driv-

 

 

ing position.

 

The key is not in the “ON position”.

Turn the key to the “ON” position.

 

The charger is still connected.

Remove the A/C cord from the wall.

 

The batteries are not charged or not connected

Check to make sure the batteries are connected

 

properly.

properly and charge if necessary.

 

The circuit breaker has tripped.

Reset the circuit breaker.

 

 

 

 

The brush motors do not work

The brush head unit is not down.

Put the brush head unit down.

WARNING: To avoid damage to the floor, the

The batteries are not charged or not connected

Check to make sure the batteries are connected

motor starts only when the machine is tra-

versing.

properly.

properly and charge if necessary.

 

Poor electrical connection at the brush head unit.

Connect the electrical connection at the brush

 

 

head unit.

Nilfisk ALTO Operator’s Manual - SCRUBTEC R Manual Steering

Form No. 71274A

Page -27-

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 30-72 English Instructions For UseTable of Contents Operator Safety Instructions Nilfisk Alto Operator’s Manual Scrubtec R Manual Steering Introduction & Machine Specifications IntroductionSymbols Used On Scrubtec R Display Screens For Scrubtec R Machine Control Panel Machine Controls and Features How to Install the Batteries How To Prepare the Machine For OperationHow To Handle the Packed Machine How to Unpack the MachineCorrect Fill Battery MaintenanceHow to Charge the Batteries Shown with Optional Chemical Mixing SytemRecharging the Batteries How To Install the Squeegee Level Indicators for the Charge of the BatteriesHow To Change or Rotate Brushes on Cylindrical Brush Head How To Remove The Brush Or Pad on the Boost machine How To Install The Brush Or Pad on the Boost machineSeat Adjustment Deluxe How To Operate The MachineScreen How to Read the Battery Meter see figure 21, aHow to Operate the Squeegee and the Vacuum Motor How to Operate the Solution FlowHow to Operate the Brush Pressure How to Operate the Forward / Reverse Switch see figure How to Fill the Solution TankOperating the Machine Do These Procedures When You Begin Your Work Period To traverse the machine follow this procedureHow to Clean a Floor Do These Procedures When You End Your Work Period How to Clean a Very Dirty FloorHow To Operate the Machine Cleaning the Recovery Tank and Filter MaintenanceSqueegee Maintenance Cleaning the Solution Tank and FilterManually Draining the Solution Tank Vac Assisted Solution Tank DrainCleaning the Vacuum Hoses Rear Squeegee Blade ReplacementHOW to Correct Problems in the Machine Cause Action Cause Action Scrubtec R Scrubtec R 571 C Final Assembly Qty Description Rotary Cyl Boost See Detail a Ref. No Qty Description See Detail a Main Frame Assy Cylindrical Main Frame Assy Boost Main Frame Assy Boost Nilfisk Alto Scrubtec R 571 Description Qty Optional Side Squeegee Lift Assembly Parts List 5/05Nilfisk Alto Scrubtec R 571, 586, 571 C, Boost R 1611 2514 Recovery Tank Assembly Nut, Drain Valve 44 31 Solution Tank ASSEMBLY-1 Solution Tank ASSEMBLY-2 Solution Tank ASSEMBLY-2 Steering Column Assy Steering Column Assy Nilfisk Alto 1A, 1B, 1C1A, 1B, 1C 20 19 18 17 AssembledView Cylindrical Head Assembly Parts List 1/11 Drawing #10962A Inch Boost Head Assy Shield Boost Bearing Note 1, TSBCL2010-12, Note Kit-Flex Plate 32 Note 1, TSBCL2010-12Bushing-Flex Plate Note 1, TSBCL2010-12 Squeegee Assembly 81cm Squeegee Assembly 81cm Squeegee Assembly 99cm Squeegee Assembly 99cm Squeegee Assembly 104cm Squeegee Assembly 104cm Qty Description Front Squeegee Assy Rotary Machines onlyFront Squeegee ARM Assy Rotary Machines only Nilfisk Alto Scrubtec R 571, 586, 571 C, Boost R Qty Description Pages Electrical Connection Diagram 9/06Nilfisk Alto -68- Form No a Page Nilfisk Alto Operator’s Manual Scrubtec R Manual Steering Page Scrubtec R 571 C Cylindrical Model Scrubtec R 571 Disc ModelDeleted Scrubtec R 586 Disc ModelPage Page
Related manuals
Manual 72 pages 47.09 Kb

586, 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.
Top Page Image Contents