Harman-Kardon AVR 5550 owner manual System and Power Connections

Page 18

Installation and Connections

System and Power Connections

The AVR 5550 is designed for flexible use with multiroom systems, external control components and power amplifiers.

Main Room Remote Control Extension

If the receiver is placed behind a solid or smoked glass cabinet door, the obstruction may prevent the remote sensor from receiving commands. In this event, the remote sensor of any Harman Kardon or other compatible device, not covered by the door, or an optional remote sensor may be used. Connect the Remote IR Output of that device or the output of the remote sensor to the Remote IR Input jack .

If other components are also prevented from receiving remote commands, only one sensor is needed. Simply use this unit’s sensor or a remote eye by running a connection from the Remote IR Output jack to the Remote IR Input jack on Harman Kardon or other compatible equipment.

Multiroom IR Link

The key to remote room operation is to link the remote room to the AVR 5550’s location with wire for an infrared receiver and speakers or an amplifier. The remote room IR receiver (this can be an optional IR receiver or any other remotable Harman Kardon device in the remote room with IR sensor integrated) should be connected to the AVR 5550 via standard coaxial cable. Connect the Remote IR Output of the device or of the optional sensor with the Multiroom IR Input jack on the AVR 5550’s rear panel.

If other Harman Kardon compatible source equipment is part of the main room installation, the Remote IR Output jack on the rear panel should be connected to the IR IN jack on that source device. This will enable the remote room location to control source equipment functions.

NOTE: All remotely controlled components must be linked together in a “daisy chain”. Connect the IR OUT jack of one unit to the IR IN of the next to establish this chain.

Multiroom Audio Connections Depending on your system`s requirement and distance from the AVR 5550 to the remote room, three options are available for audio connection:

Option 1: Use high-quality, shielded audio interconnect phono cable from the AVR 5550’s location to the remote room. In the remote room, connect the interconnect cable to a stereo power amplifier. The amplifier will be connected to the room’s speakers. At the AVR 5550, plug the audio interconnect cables into the Multiroom Output Jacks on the AVR 5550’s rear panel.

Option 2: Place the amplifier that will provide power to the remote location speakers in the same room as the AVR 5550, and connect the Multiroom Output jacks on the rear panel of the AVR to the audio input of the remote room amplifier. Use the appropriate speaker wire to connect the optional power amplifier to the remote speakers. High-quality wire of at least

2.5mm2 is recommended for long multiroom connections.

Option 3: Taking advantage of the AVR 5550’s built-in seven-channel amplifier, it is possible to use two of the amplifier channels to power speakers in the remote room. When using this option you will not be able to use the full

7.1-channel capabilities of the AVR 5550 in the main listening room, but you will be able to add another listening room without additional external power amplifiers. To use the internal amplifiers to power a remote zone, connect the speakers for the remote room location to the

Surround Back/Multiroom Speaker Outputs . Before using the remote room you will need to configure the amplifiers for surround operation by changing a setting in the Advanced Select menu, following the instructions shown on page 37.

NOTE: For all options, you may connect an optional IR sensor (Harman Kardon He 1000) in the remote room to the AVR 5550 via an appro- priate cable. Connect the sensor’s cable to the Multiroom IR Input on the AVR 5550 and use the Zone II remote to control the room vol- ume. Alternatively, you may install an optional volume control between the output of the ampli- fiers and the speakers.

A-BUS Installation Connections

The AVR 5550 is among the very few receivers available today that offers built-in A-BUS Ready® operation. When used with an optional A-BUS keypad or control module, you have all the benefits of remote zone operation without the need for an external power amplifier.

To use the AVR 5550 with an approved A-BUS product, simply connect the keypad or module that is in the remote room to the AVR 5550 using standard “Category 5” wiring that is properly rated for the inwall use specific to the installation. Terminate the wiring at the receiver end to a standard RJ-45 jack in compliance with the instructions furnished with the A-BUS module.

No further installation or adjustment is needed, as the A-BUS connector on the AVR 5550 routes the signals in and out of the keypad to their proper destination for power, signal source and control. The output fed to the A-BUS jack is determined by the AVR 5550’s multiroom system, and the menus may be used as is.

RS-232 Connections

The AVR 5550 includes an RS-232 serial port connection that may be used to control the unit via compatible optional, external keypads or control systems. The physical connection to the AVR 5550 from the control device is a standard D-9 connection, but to assure compatible and proper operation, specific software commands and pin wiring schemes are required. Due to the complexity of RS-232 connections we recommend that they be made only by trained installers familiar with their use. To obtain additional information on the use of the

AVR 5550 with RS-232 control, please contact Harman Kardon’s customer service department or consult our Web site at www.harmankardon.com.

AC Power Connections

This unit is equipped with two accessory AC outlets. They may be used to power accessory devices, but they should not be used with high-current draw equipment such as power amplifiers. The total power draw to the Unswitched Outlet must not exceed 100 watts, that to the Switched Outlet

50 watts.

The Switched outlet will receive power only when the unit is on completely. This is recom- mended for devices that have no power switch or a mechanical power switch that may be left in the “ON” position.

NOTE: Many audio and video products go into a Standby mode when they are used with switched outlets, and cannot be fully turned on using the outlet alone without a remote control command.

The Unswitched outlet will receive power as long as the unit is plugged into a powered AC outlet and the Main Power Switch 1 is on.

The AVR 5550 features a removable power cord that allows wires to be run to a complex instal- lation so that the unit, itself, need not be installed until it is ready for connection. When all connections described above have been made, connect the AC Power cord to the AC Power Cord Jack .

The AVR 5550 draws significantly more current than other household devices such as computers that use removable power cords. For that rea- son, it is important that only the cord supplied with the unit (or a direct replacement of identi- cal capacity) be used.

Once the power cord is connected, you are almost ready to enjoy the AVR 5550’s incredible power and fidelity!

18INSTALLATION AND CONNECTIONS

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Power for the Digital Revolution AVR 5550 Audio/ Video ReceiverTable of Contents Declaration of ConformityIntroduction Description and FeaturesFront panel analog A/V inputs, switch- able to outputs Variety of modes and two modes of VMAxSafety Information Important Safety InformationUnpacking Front Panel Controls For more information See page 40 for more information on tuning stationsCoaxial Ó To select between the OpticalMulti Indicator Auto Indicator Front Panel Information DisplayRear Panel Connections Digital Audio Outputs Connect theseSwitched Outlet AC Power Cord Jack Connect the AC Video source selected by the receiver’s video switcherUnswitched Outlet + and negative terminalsRear Panel Connections Main Remote Control Functions Direct Button K Tuning Up/DownLogic 7 Mode Select Button P Transport Controls Channel/8 Channel Direct Input Movies Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Scart A/V Connections If you use a unit providing RGB signals on a RGB signals can be pathed throughImportant Note for the Use SCART-Cinch Adapters System and Power Connections Speaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display First Turn OnInput Setup Speaker SetupSurround Subwoofer Surround Setup Night Mode Settings Adjustments for Other InputsDelay Settings To call up the menuOutput Level Adjustment Using EzSetPress and hold the SPL Indicator Select Sensor and Indicator off So that on is highlightedUp the Volume until you can hear the test noise clearly Surround Mode Chart OperationNo surround channels No delay availableMix of the in-phase material of the left and right channels But no surround speakersBasic Operation Source SelectionChannel/8-Channel Direct Input Volume Up/Down Buttons Controls and Use of HeadphonesSurround Mode Selection One of the most important featuresPCM Audio Playback Digital Audio PlaybackDolby Digital MP3 Audio PlaybackSpeaker/Channel Indicators MP 3 DSP mode found in the newDigital Bitstream Indicators Selecting a Digital SourceFront Panel In/Outputs Night ModeTape Recording Or 2 OutputsOutput Level Adjustment With Source Signals Memory BackupIndicator Select Surround Amplifier Channel Assignment Advanced FeaturesTurn On Volume Level Display BrightnessFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationSemi-OSD Settings InstallationRS-232 Control Multiroom SetupMultiroom Operation Multiroom OperationTuner Operation Basic Tuner OperationRDS Operation RDS station Program Search PTYIf the unit you wish to program into Programming the Remote with CodesDirect Code Entry Must be repeated firstLearning Codes from a Remote Programming the RemoteCode Readout Erasing Learned CodesErasing Macro Commands Macro ProgrammingPress the AVR Selector Remote With Other Devices Volume Punch-ThroughProgrammed Device Functions 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Scan Scan + Rewind Play Fast Fwd Record Stop Pause Power On Power Off Mute TV Select Channel +Power On Power Off VID 3 Select Channel + Prev Channel 1 2 3 4 5 6 7 ClearPower Switch 1 is pushed Troubleshooting GuideProcessor Reset Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR 5550 specifications

The Harman-Kardon AVR 5550 is a highly regarded audio/video receiver that embodies a perfect blend of power, performance, and versatility. Designed for the discerning home theater enthusiast, this model delivers a remarkable audio-visual experience with its robust set of features and cutting-edge technologies.

One of the standout characteristics of the AVR 5550 is its impressive power output. With 100 watts per channel across seven channels, it is capable of driving a wide range of speakers with clarity and authority. The amplifier section employs Harman-Kardon's legendary technology to ensure low distortion and a dynamic listening experience. This level of power allows users to experience immersive sound in their home theaters, making it ideal for movie nights and music playback alike.

Equipped with a variety of connectivity options, the AVR 5550 is designed to integrate seamlessly with modern audio and video sources. The receiver features numerous HDMI inputs to accommodate multiple devices, including Blu-ray players, gaming consoles, and streaming devices. Additionally, it provides optical and coaxial digital inputs, as well as analog inputs for older equipment. This comprehensive set of connectivity options ensures that users can enjoy a wide range of media without the hassle of frequently switching cables.

The AVR 5550 also includes advanced surround sound processing technologies, like Dolby Digital and DTS, which contribute to its ability to create an enveloping soundstage. The integration of Harman-Kardon’s own Logic 7 technology enhances the audio experience by utilizing multi-channel processing to extract the best sound from stereo and multi-channel sources alike.

In terms of design, the AVR 5550 sports a sleek, modern aesthetic that fits well into any home theater setup. The intuitive user interface and remote control make it easy for users to navigate settings and choose their desired audio modes. The receiver also features a built-in AM/FM tuner, expanding its functionality beyond just home theater use.

Lastly, the AVR 5550 emphasizes user-friendly features such as on-screen displays and programmable presets, allowing personal preferences to be easily adjusted. Whether for casual listening or full-fledged cinematic experiences, the Harman-Kardon AVR 5550 stands out as a dependable and high-quality option that caters to all audiovisual needs. Its fusion of power, versatility, and advanced technologies makes it a favorite among audio enthusiasts around the world.
Top Page Image Contents