Harman-Kardon AVR 5550 System Configuration, First Turn On, Using the On-Screen Display, Line a B

Page 20

System Configuration

Once the speakers have been placed in the room and connected, the remaining steps are to pro- gram the system configuration memories. With the AVR 5550 two kind of memories are used, those associated individually with the input selected, e.g. surround modes, and others work- ing globally for all inputs selected like speaker output levels, crossover frequencies or delay times used by the surround sound processor.

First Turn On

You are now ready to power up the AVR 5550 to begin these final adjustments.

1.Make certain that the AC power cord is firmly inserted in to the AC Power cord Recepticle and plug the cord into an unswitched AC

outlet. To maintian the unit's safety rating,

DO NOT substitute the power cord for one with lower current capacity.

2.Press the Main Power Switch 1 in until it latches and the word “OFF” on the top of the switch disappears inside the front panel. Note that the Power Indicator 3 will turn orange, indicating that the unit is in the Standby mode.

3.Remove the protective plastic film from the main front-panel lens. If left in place, the film may affect the performance of your remote control.

4.Install the three supplied AAA batteries in the remote as shown. Be certain to follow the (+) and (–) polarity indicators that are on the top of the battery compartment.

5.Turn the AVR 5550 on either by pressing the System Power Control 2 or the Input Source Selector % on the front panel, or via the remote by pressing the Power On Button 3, AVR Selector 5or any of the Input Selectors 46on the remote. The Power Indicator 3 will turn green to confirm that the unit is on, and the Main Information Display ˜ will also light up.

NOTE: After pressing one of the Input Selector buttons 4to turn the unit on, press the AVR Selector 5to have the remote control the AVR functions.

Using the On-Screen Display

When making the following adjustments, you may find them easier to make via the unit’s on-screen display system. These easy-to-read displays give you a clear picture of the current status of the unit and facilitate speaker, delay, input or digital selection you are making.

To view the on-screen displays, make certain you have made a connection from the Video Monitor Out jack on the rear panel to the composite or S-Video input of your TV or projec- tor. In order to view the AVR’s displays, the correct video input must be selected on your video dis- play. Note that the on-screen menus are not available when a component video display is in use.

IMPORTANT NOTE: When viewing the on-screen menus using a CRT-based projector, plasma display or any direct-view CRT monitor or television, it is important that they not be left on the screen for an extended period of time. As with any video display, but particularly with projectors, constant display of a static image such as these menus or video game images may cause the image to be permanently “burned into” the CRT. This type of damage is not covered by the AVR 5550 warranty and may not be covered by the projector TV set’s warranty.

The AVR 5550 has two on-screen display modes, “Semi-OSD” and “Full-OSD.” When making con- figuration adjustments, it is recommended that the Full-OSD mode be used. This will place a com- plete status report or option listing on the screen, making it easier to view the available options and make the settings on the screen. The Semi-OSD mode uses one-line displays only.

Note that when the full OSD system is in use, the menu selections are not shown in the Infor- mation Display ˜. When the full OSD menu system is used, OSD ON will appear in the Upper Display Line A and the OSD Indicator C will illuminate to remind you that a video display must be used.

When the semi-OSD system is used in conjunction with the discrete configuration buttons, the on screen display will show a single line of text with the current menu selection. That selection will also be shown in the Upper or Lower Display

Line A B.

The full OSD system can always be turned on or off by pressing the OSD button L. When this button is pressed the MASTER MENU (Figure 1) will appear, and adjustments are made from the individual menus. Note that the menus will remain on the screen for 20 seconds after the latest action was made on the screen menu, then they will “time-out” and disappear from the screen. The time-out may be increased to as much as

50 seconds by going to the ADVANCED SELECT menu, and changing the item titled

FULL OSD TIME OUT.

The semi-OSD system is also available as a system default, although it may be turned off by using the ADVANCED SELECT menu. (See page 37). With the semi-OSD system, you may make adjustments directly, by pressing the but- tons on the front panel or remote control for the specific parameter to be adjusted. For example, to change the digital input for any of the sources, press the Digital Select Button ÛGand then any of the Selector buttons ‹/ › 7$ or ⁄/¤ Don the front panel or remote.

* M A S T E R M E N U *

I N / O U T S E T U P

S U R R O U N D S E T U P

S P E A K E R S E T U P

D E L A Y A D J U S T

C H A N N E L A D J U S T

M U L T I - R O O M

A D V A N C E D

Figure 1

System Setup

The AVR 5550 features an advanced memory sys- tem that enables you to establish different config- urations for the digital input, surround mode and speaker setting for each input source. To ease the speaker setting, the same speaker setting can also be made for all inputs. This flexibility enables you to custom tailor the way in which you listen to each source and have the AVR 5550 memorize them. This means, for example, that you may associate different surround modes and analog or digital inputs with different sources, or set differ- ent speaker configurations with the resultant changes to the bass management system or the use of the center speaker and/or the Subwoofer. Once these settings are made, they will automati- cally be recalled whenever you select that input.

The factory default settings for the AVR 5550 have all inputs configured for an analog audio input except for the DVD input, where the Coaxial Digital Input is the default. Once the DSP processing system is used for the first time for any input, the speaker settings will auto- matically default to “Small” at all positions with the subwoofer set to “LFE.” The default setting for the surround modes is “Surround Off,” or two- channel stereo, although Dolby Digital or DTS will automatically be selected as appropriate when a source with digital encoding is in use.

Before using the unit, you will probably want to change the settings for most inputs so that they are properly configured to reflect the use of digi- tal or analog inputs and the surround mode asso- ciated with the input. Remember that since the AVR 5550 memorizes the settings for each input individually, you will need to make these adjust- ments for each input used. However, once they are made, further adjustment is only required when system components are changed.

20SYSTEM CONFIGURATION

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Power for the Digital Revolution AVR 5550 Audio/ Video ReceiverTable of Contents Declaration of ConformityDescription and Features Front panel analog A/V inputs, switch- able to outputsIntroduction Variety of modes and two modes of VMAxUnpacking Safety InformationImportant Safety Information Front Panel Controls See page 40 for more information on tuning stations Coaxial ÓFor more information To select between the OpticalMulti Indicator Auto Indicator Front Panel Information DisplayRear Panel Connections Digital Audio Outputs Connect theseVideo source selected by the receiver’s video switcher Unswitched OutletSwitched Outlet AC Power Cord Jack Connect the AC + and negative terminalsRear Panel Connections Logic 7 Mode Select Button P Transport Controls Main Remote Control FunctionsDirect Button K Tuning Up/Down Channel/8 Channel Direct Input Movies Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Scart A/V Connections Important Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aRGB signals can be pathed through System and Power Connections Speaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnInput Setup Speaker SetupSurround Subwoofer Surround Setup Adjustments for Other Inputs Delay SettingsNight Mode Settings To call up the menuPress and hold the SPL Indicator Select Output Level AdjustmentUsing EzSet Sensor and Indicator off So that on is highlightedUp the Volume until you can hear the test noise clearly Surround Mode Chart OperationNo delay available Mix of the in-phase material of the left and right channelsNo surround channels But no surround speakersChannel/8-Channel Direct Input Basic OperationSource Selection Controls and Use of Headphones Surround Mode SelectionVolume Up/Down Buttons One of the most important featuresDigital Audio Playback Dolby DigitalPCM Audio Playback MP3 Audio PlaybackMP 3 DSP mode found in the new Digital Bitstream IndicatorsSpeaker/Channel Indicators Selecting a Digital SourceNight Mode Tape RecordingFront Panel In/Outputs Or 2 OutputsIndicator Select Output Level Adjustment With Source SignalsMemory Backup Advanced Features Turn On Volume LevelSurround Amplifier Channel Assignment Display BrightnessAdvanced Features / Multiroom Operation Semi-OSD SettingsFull-OSD Time Out Adjustment InstallationMultiroom Setup Multiroom OperationRS-232 Control Multiroom OperationRDS Operation Tuner OperationBasic Tuner Operation RDS station Program Search PTYProgramming the Remote with Codes Direct Code EntryIf the unit you wish to program into Must be repeated firstProgramming the Remote Code ReadoutLearning Codes from a Remote Erasing Learned CodesPress the AVR Selector Erasing Macro CommandsMacro Programming Volume Punch-Through Programmed Device FunctionsRemote With Other Devices 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Power On Power Off Mute TV Select Channel + Power On Power Off VID 3 Select Channel +Scan Scan + Rewind Play Fast Fwd Record Stop Pause Prev Channel 1 2 3 4 5 6 7 ClearTroubleshooting Guide Processor ResetPower Switch 1 is pushed Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR 5550 specifications

The Harman-Kardon AVR 5550 is a highly regarded audio/video receiver that embodies a perfect blend of power, performance, and versatility. Designed for the discerning home theater enthusiast, this model delivers a remarkable audio-visual experience with its robust set of features and cutting-edge technologies.

One of the standout characteristics of the AVR 5550 is its impressive power output. With 100 watts per channel across seven channels, it is capable of driving a wide range of speakers with clarity and authority. The amplifier section employs Harman-Kardon's legendary technology to ensure low distortion and a dynamic listening experience. This level of power allows users to experience immersive sound in their home theaters, making it ideal for movie nights and music playback alike.

Equipped with a variety of connectivity options, the AVR 5550 is designed to integrate seamlessly with modern audio and video sources. The receiver features numerous HDMI inputs to accommodate multiple devices, including Blu-ray players, gaming consoles, and streaming devices. Additionally, it provides optical and coaxial digital inputs, as well as analog inputs for older equipment. This comprehensive set of connectivity options ensures that users can enjoy a wide range of media without the hassle of frequently switching cables.

The AVR 5550 also includes advanced surround sound processing technologies, like Dolby Digital and DTS, which contribute to its ability to create an enveloping soundstage. The integration of Harman-Kardon’s own Logic 7 technology enhances the audio experience by utilizing multi-channel processing to extract the best sound from stereo and multi-channel sources alike.

In terms of design, the AVR 5550 sports a sleek, modern aesthetic that fits well into any home theater setup. The intuitive user interface and remote control make it easy for users to navigate settings and choose their desired audio modes. The receiver also features a built-in AM/FM tuner, expanding its functionality beyond just home theater use.

Lastly, the AVR 5550 emphasizes user-friendly features such as on-screen displays and programmable presets, allowing personal preferences to be easily adjusted. Whether for casual listening or full-fledged cinematic experiences, the Harman-Kardon AVR 5550 stands out as a dependable and high-quality option that caters to all audiovisual needs. Its fusion of power, versatility, and advanced technologies makes it a favorite among audio enthusiasts around the world.
Top Page Image Contents