Harman-Kardon AVR 5550 owner manual Channel Control Punch-Through, Selector button

Page 46

Programming the Remote

Channel Control Punch-Through

The AVR 5550’s remote may be programmed to operate so that the channel control function, performed with the Sleep 9and Surround

Abuttons, for either the TV, cable or satellite receiver used in your system may be used in con- junction with one of the other devices controlled by the remote. For example, while using and controlling the VCR, you may wish to change channels on a cable box or satellite receiver without having to change the device selected by the AVR 5550 or the remote. To program the remote for Channel Control Punch-Through, follow these steps:

1.Press the Input Selector button 4for the device you wish to have the channel control

associated with and the Mute button at the same time until the red light illuminates under the Input Selector 4and the Program/SPL Indicator 2flashes amber.

2. Press the Volume Down button . The Program/SPL Indicator 2will stop flashing and stay amber.

3.Press and release the AVR 5or Input Selector button 4for the device that will be used to change the channels. The Program/SPL Indicator 2will blink green three times and then go out to confirm the data entry.

Example: To control the channels using your TV while the remote is set to control the VCR, first press the VID 1/VCR Input Selector button

4and the Mute button at the same time. Next, release them and press the Volume Down

button , followed by the same Input

Selector button 4.

NOTE: To remove the Channel Control Punch- Through and return the remote to its original con- figuration, repeat the steps shown in the example above. However, press the same Input Selector in Steps 1 and 3.

Transport Control Punch-Through

The AVR 5550’s remote may be programmed to operate so that the Transport Control Functions P(Play, Stop, Fast Forward, Rewind, Pause and Record) for a VCR, DVD or CD will operate in conjunction with one of the other devices controlled by the remote. For example, while using and controlling the TV, you may wish to start or stop your VCR or DVD without having to change the device selected by the AVR 5550 or the remote. To program the remote for Transport Control Punch-Through, follow these steps:

1.Press the Input Selector 4for the device you wish to have the channel control associated

with and the Mute button at the same time until the red light illuminates, under the Input Selector 4and the Program/ SPL Indicator

2flashes amber.

2.Press the Play button P. The Program/SPL Indicator 2will stop flashing and stay amber.

3.Press and release the AVR 5or Input Selector button 4for the device that will be used to change the channels. The Program/SPL Indicator 2will blink green three times and then go out to confirm the data entry.

Example: To control the transport of a CD player while the remote is set to control the TV, press the VID 2/TV Input Selector button 4and the

Mute button at the same time. Next, release them and press the Play button P, followed by the CD Input Selector button 4.

NOTE: To remove the Channel Control Punch- Through and return the remote to its original con- figuration, repeat the steps shown in the example above. However, press the same Input Selector in Steps 1 and 3.

NOTE: Before programming the remote for Volume, Channel or Transport Punch-Through, make certain that any programming needed for the specific TV, CD, DVD, Cable or Satellite Receivers has been completed.

Reassigning Device-Control Selectors

Although any of the Input Selectors 4is nor- mally assigned to the category of product shown on the remote, it is possible to reassign one of these buttons to operate a second device of another type. For example, if you have two VCRs but no tape, you may program the TAPE 4 button to operate a second VCR. Before you can start you must find out the three-digit code number for your second device (your second VCR) to operate, as outlined on page 42. Then reassign the TAPE 4button with the following steps:

1. Press the Input Selector 4you wish to

reassign and the Mute button at the same time until the red light illuminates under the Input Selector 4and the Program/SPL Indicator 2flashes amber.

2.Press the Input Selector 4for the device, whose function you wish to program into the reassigned button.

3.Enter the three-digit code for the specific model you wish the reassigned button to operate.

4.Press the same Input Selector 4pressed in Step 1 once again to store the selection. The red LED under the re-assigned Input Selector will flash three times and then go out.

Example: To use the TAPE 4button to oper- ate a second VCR, first press the TAPE Input

Selector 4and the Mute button at the same time until the red light glows under the TAPE 4button. Press the VCR 4button, followed by the three-digit code for the specific model you wish to control. Finally, press the TAPE

4button again.

Important Note: Only those Input Selector buttons 4can be reassigned that replace other buttons for devices of the same kind. So the bottons for DVD, CD, TAPE and VCR (devices with transport functions) can replace one another as the Selectors for TV, CBL/SAT, and VID 4.

To remove the Reassign function and return the remote to its original configuration, repeat steps 1, 3 and 4 above (not 2), however, press the same Input Selector button 4in steps 1 and 4 (i.e. re-program the button with its original code).

46PROGRAMMING THE REMOTE

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Power for the Digital Revolution AVR 5550 Audio/ Video ReceiverTable of Contents Declaration of ConformityIntroduction Description and FeaturesFront panel analog A/V inputs, switch- able to outputs Variety of modes and two modes of VMAxImportant Safety Information Safety InformationUnpacking Front Panel Controls For more information See page 40 for more information on tuning stationsCoaxial Ó To select between the OpticalMulti Indicator Auto Indicator Front Panel Information DisplayRear Panel Connections Digital Audio Outputs Connect theseSwitched Outlet AC Power Cord Jack Connect the AC Video source selected by the receiver’s video switcherUnswitched Outlet + and negative terminalsRear Panel Connections Direct Button K Tuning Up/Down Main Remote Control FunctionsLogic 7 Mode Select Button P Transport Controls Channel/8 Channel Direct Input Movies Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Scart A/V Connections RGB signals can be pathed through If you use a unit providing RGB signals on aImportant Note for the Use SCART-Cinch Adapters System and Power Connections Speaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display First Turn OnInput Setup Speaker SetupSurround Subwoofer Surround Setup Night Mode Settings Adjustments for Other InputsDelay Settings To call up the menuUsing EzSet Output Level AdjustmentPress and hold the SPL Indicator Select Sensor and Indicator off So that on is highlightedUp the Volume until you can hear the test noise clearly Surround Mode Chart OperationNo surround channels No delay availableMix of the in-phase material of the left and right channels But no surround speakersSource Selection Basic OperationChannel/8-Channel Direct Input Volume Up/Down Buttons Controls and Use of HeadphonesSurround Mode Selection One of the most important featuresPCM Audio Playback Digital Audio PlaybackDolby Digital MP3 Audio PlaybackSpeaker/Channel Indicators MP 3 DSP mode found in the newDigital Bitstream Indicators Selecting a Digital SourceFront Panel In/Outputs Night ModeTape Recording Or 2 OutputsMemory Backup Output Level Adjustment With Source SignalsIndicator Select Surround Amplifier Channel Assignment Advanced FeaturesTurn On Volume Level Display BrightnessFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationSemi-OSD Settings InstallationRS-232 Control Multiroom SetupMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationRDS Operation RDS station Program Search PTYIf the unit you wish to program into Programming the Remote with CodesDirect Code Entry Must be repeated firstLearning Codes from a Remote Programming the RemoteCode Readout Erasing Learned CodesMacro Programming Erasing Macro CommandsPress the AVR Selector Remote With Other Devices Volume Punch-ThroughProgrammed Device Functions 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Scan Scan + Rewind Play Fast Fwd Record Stop Pause Power On Power Off Mute TV Select Channel +Power On Power Off VID 3 Select Channel + Prev Channel 1 2 3 4 5 6 7 ClearPower Switch 1 is pushed Troubleshooting GuideProcessor Reset Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR 5550 specifications

The Harman-Kardon AVR 5550 is a highly regarded audio/video receiver that embodies a perfect blend of power, performance, and versatility. Designed for the discerning home theater enthusiast, this model delivers a remarkable audio-visual experience with its robust set of features and cutting-edge technologies.

One of the standout characteristics of the AVR 5550 is its impressive power output. With 100 watts per channel across seven channels, it is capable of driving a wide range of speakers with clarity and authority. The amplifier section employs Harman-Kardon's legendary technology to ensure low distortion and a dynamic listening experience. This level of power allows users to experience immersive sound in their home theaters, making it ideal for movie nights and music playback alike.

Equipped with a variety of connectivity options, the AVR 5550 is designed to integrate seamlessly with modern audio and video sources. The receiver features numerous HDMI inputs to accommodate multiple devices, including Blu-ray players, gaming consoles, and streaming devices. Additionally, it provides optical and coaxial digital inputs, as well as analog inputs for older equipment. This comprehensive set of connectivity options ensures that users can enjoy a wide range of media without the hassle of frequently switching cables.

The AVR 5550 also includes advanced surround sound processing technologies, like Dolby Digital and DTS, which contribute to its ability to create an enveloping soundstage. The integration of Harman-Kardon’s own Logic 7 technology enhances the audio experience by utilizing multi-channel processing to extract the best sound from stereo and multi-channel sources alike.

In terms of design, the AVR 5550 sports a sleek, modern aesthetic that fits well into any home theater setup. The intuitive user interface and remote control make it easy for users to navigate settings and choose their desired audio modes. The receiver also features a built-in AM/FM tuner, expanding its functionality beyond just home theater use.

Lastly, the AVR 5550 emphasizes user-friendly features such as on-screen displays and programmable presets, allowing personal preferences to be easily adjusted. Whether for casual listening or full-fledged cinematic experiences, the Harman-Kardon AVR 5550 stands out as a dependable and high-quality option that caters to all audiovisual needs. Its fusion of power, versatility, and advanced technologies makes it a favorite among audio enthusiasts around the world.
Top Page Image Contents