Harman-Kardon AVR 5550 Video source selected by the receiver’s video switcher, Unswitched Outlet

Page 9

Rear Panel Connections

S-Video source selected by the receiver’s video switcher.

DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD player or other video source.

Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. In conformance with the new CEA color code specification, the White terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Left speaker with the older color coding, while the Red terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Right speaker. Connect the black (–) terminals on the AVR 5550 to the black

(–)terminals on the speakers. See page 15 for more information on speaker polarity.

Center Speaker Outputs: Connect these outputs to the matching + and – terminals on your center channel speaker. In conformance with the new CEA color code specification, the Green Terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on speakers with the older color coding. Connect the black (–) terminal on the AVR to the black negative (–) terminal on your speaker. (See page 15 for more information on speaker polarity.)

Surround Speaker Outputs: Connect these outputs to the matching + and – terminals on your surround channel speakers. In confor- mance with the new CEA color code specifica- tion, the Blue terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on the Surround Left speaker with older color coding, while the Gray terminal should be connected to the red (+) terminal on the Surround Right speaker with the older color cod- ing. Connect the black (–) terminal on the AVR to the matching black negative (–) terminals for each surround speaker. (See page 15 for more information on speaker polarity.)

Switched AC Accessory Outlet: This out- let may be used to power any device that you wish to have turn on when the AVR 5550 is turned on with the System Power Control switch 2.

Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 5550 is on or off (in Standby), provided that the Main Power switch 1 is on.

Note: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts from the

Unswitched Outlet

and 50 W from the

Switched Outlet .

 

AC Power Cord Jack: Connect the AC

power cord to this jack when the installation is complete. To ensure safe operation, use only the power cord supplied with the unit. If a replace- ment is required it must be of the same type and capacity.

Video 2 Component Video Inputs: Connect the Y/Pr/Pb component video outputs of an HDTV Set-top convertor, satellite receiver, or other video source device with component video outputs to these jacks.

Monitor Component Video Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the two

Component Video Inputs is selected the signal will be sent to these jacks.

DVD Component Video Inputs: Connect the Y/Pr/Pb component video outputs of a DVD player to these jacks.

Note: All component inputs/outputs can be used for RGB signals too, in the same way as described for the Y/Pr/Pb signals, then connected to the jacks with the corresponding color.

RGB connection is not possible if the source out- puts a separate sync signal (see page 16).

Remote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

Remote IR Input: If the AVR 5550’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

Multiroom IR Input: Connect the output of an IR sensor in a remote room to this jack to operate the AVR 5550’s multiroom control system.

Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

Video 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jacks on a second VCR.

Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on any video source.

Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a second VCR or other video source.

Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, the S/PDIF output of a compatible com- puter sound card playing MP3 files or streams, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal, a 2 channel MPEG 1 signal, an MP3 or HDCD data stream or a standard PCM digital source.

Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, the S/PDIF output of a compatible computer sound card playing MP3 files or streams, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal, a 2 channel MPEG 1 signal, an MP3 or HDCD data stream or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks.

Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any Audio recorder.

Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a second VCR or other audio or video source.

Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

Video 1 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other audio or video source.

Video 1 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any other Audio recorder.

Preamp Outputs: Connect these jacks to an optional, external power amplifier for appli- cations where higher power is desired.

Surround Back/Multiroom Speaker Outputs: These speaker terminals are normally used to power the surround back left/surround back right speakers in a 7.1 channel system. However, they may also be used to power the speakers in a second zone, which will receive the output selected for a multiroom system.

To change the output fed to these terminals from the default of the Surround Back speakers to the Multiroom Output, you must change a setting in the Advanced Menu of the OSD sys- tem. See page 37 for more information on con- figuring this speaker output. In normal surround system use, the brown and black terminals are the surround back left channel positive (+) and negative (–) connections and the tan and black terminals are the surround back right positive

(+) and negative (–) terminals.

For multiroom use, connect the brown and black SBL terminals to the red and black connections on the left remote zone speaker and connect the

REAR PANEL CONNECTIONS 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVR 5550 Audio/ Video Receiver Power for the Digital RevolutionDeclaration of Conformity Table of ContentsFront panel analog A/V inputs, switch- able to outputs Description and FeaturesIntroduction Variety of modes and two modes of VMAxSafety Information Important Safety InformationUnpacking Front Panel Controls Coaxial Ó See page 40 for more information on tuning stationsFor more information To select between the OpticalFront Panel Information Display Multi Indicator Auto IndicatorDigital Audio Outputs Connect these Rear Panel ConnectionsUnswitched Outlet Video source selected by the receiver’s video switcherSwitched Outlet AC Power Cord Jack Connect the AC + and negative terminalsRear Panel Connections Main Remote Control Functions Direct Button K Tuning Up/DownLogic 7 Mode Select Button P Transport Controls Channel/8 Channel Direct Input Movies ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Scart A/V Connections If you use a unit providing RGB signals on a RGB signals can be pathed throughImportant Note for the Use SCART-Cinch Adapters System and Power Connections Speaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnSpeaker Setup Input SetupSurround Subwoofer Surround Setup Delay Settings Adjustments for Other InputsNight Mode Settings To call up the menuOutput Level Adjustment Using EzSetPress and hold the SPL Indicator Select So that on is highlighted Sensor and Indicator offUp the Volume until you can hear the test noise clearly Operation Surround Mode ChartMix of the in-phase material of the left and right channels No delay availableNo surround channels But no surround speakersBasic Operation Source SelectionChannel/8-Channel Direct Input Surround Mode Selection Controls and Use of HeadphonesVolume Up/Down Buttons One of the most important featuresDolby Digital Digital Audio PlaybackPCM Audio Playback MP3 Audio PlaybackDigital Bitstream Indicators MP 3 DSP mode found in the newSpeaker/Channel Indicators Selecting a Digital SourceTape Recording Night ModeFront Panel In/Outputs Or 2 OutputsOutput Level Adjustment With Source Signals Memory BackupIndicator Select Turn On Volume Level Advanced FeaturesSurround Amplifier Channel Assignment Display BrightnessSemi-OSD Settings Advanced Features / Multiroom OperationFull-OSD Time Out Adjustment InstallationMultiroom Operation Multiroom SetupRS-232 Control Multiroom OperationTuner Operation Basic Tuner OperationRDS Operation Program Search PTY RDS stationDirect Code Entry Programming the Remote with CodesIf the unit you wish to program into Must be repeated firstCode Readout Programming the RemoteLearning Codes from a Remote Erasing Learned CodesErasing Macro Commands Macro ProgrammingPress the AVR Selector Programmed Device Functions Volume Punch-ThroughRemote With Other Devices 4and the Mute buttonSelector button Channel Control Punch-ThroughResetting the Remote Memory Function List Power On Power Off VID 3 Select Channel + Power On Power Off Mute TV Select Channel +Scan Scan + Rewind Play Fast Fwd Record Stop Pause Prev Channel 1 2 3 4 5 6 7 ClearProcessor Reset Troubleshooting GuidePower Switch 1 is pushed Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR 5550 specifications

The Harman-Kardon AVR 5550 is a highly regarded audio/video receiver that embodies a perfect blend of power, performance, and versatility. Designed for the discerning home theater enthusiast, this model delivers a remarkable audio-visual experience with its robust set of features and cutting-edge technologies.

One of the standout characteristics of the AVR 5550 is its impressive power output. With 100 watts per channel across seven channels, it is capable of driving a wide range of speakers with clarity and authority. The amplifier section employs Harman-Kardon's legendary technology to ensure low distortion and a dynamic listening experience. This level of power allows users to experience immersive sound in their home theaters, making it ideal for movie nights and music playback alike.

Equipped with a variety of connectivity options, the AVR 5550 is designed to integrate seamlessly with modern audio and video sources. The receiver features numerous HDMI inputs to accommodate multiple devices, including Blu-ray players, gaming consoles, and streaming devices. Additionally, it provides optical and coaxial digital inputs, as well as analog inputs for older equipment. This comprehensive set of connectivity options ensures that users can enjoy a wide range of media without the hassle of frequently switching cables.

The AVR 5550 also includes advanced surround sound processing technologies, like Dolby Digital and DTS, which contribute to its ability to create an enveloping soundstage. The integration of Harman-Kardon’s own Logic 7 technology enhances the audio experience by utilizing multi-channel processing to extract the best sound from stereo and multi-channel sources alike.

In terms of design, the AVR 5550 sports a sleek, modern aesthetic that fits well into any home theater setup. The intuitive user interface and remote control make it easy for users to navigate settings and choose their desired audio modes. The receiver also features a built-in AM/FM tuner, expanding its functionality beyond just home theater use.

Lastly, the AVR 5550 emphasizes user-friendly features such as on-screen displays and programmable presets, allowing personal preferences to be easily adjusted. Whether for casual listening or full-fledged cinematic experiences, the Harman-Kardon AVR 5550 stands out as a dependable and high-quality option that caters to all audiovisual needs. Its fusion of power, versatility, and advanced technologies makes it a favorite among audio enthusiasts around the world.
Top Page Image Contents