Extron electronic MAV Plus Series manual Performing a hard reset, Perform a hard reset as follows

Operation, cont’d

Performing a hard reset

The hard reset function restores the switcher to the base firmware that it was shipped with. This reset also clears all ties and presets, clears all video and audio mutes, clears all I/O grouping, clears all RGB delay, and clears all audio settings.

After a hard reset, events do not automatically start, but user settings and files are restored.

Perform a hard reset as follows:

NThe hard reset restores the factory-installed firmware. The switcher reverts to that factory firmware the next time power is cycled off and on unless a firmware update is performed before the power cycle.

NThe hard reset clears most image and audio adjustments. If you want to save these settings, use the Windows-based Matrix Switchers Control Program and the File > Save MATRIX settings as... selection before you perform this reset (See chapter 5, “Matrix Software”).

1. If necessary, turn off power to the switcher.

2. Press and hold the Reset button on the rear panel while you apply AC power to the switcher (figure 3-83).

Press and hold the Reset button while you apply power to the switcher.

RESET

The switcher flashes the front panel button indicators green, red, and amber and then turns them off.

Power

Continue to hold the Reset button until all input and output buttons return to either unlit or to background illumination and the RGBHV or Video and Audio buttons turn on.

Release the Reset button.

RESET

NOTE The Reset button on switchers with matrix sizes of 24 x 12 and above have a different appearance and do not have a rear panel Reset LED.

Figure 3-83 — Hard reset

3-58 CrossPoint / MAV Matrix Switchers • Operation