Extron electronic MAV Plus Series Command/Response Table for IP-specific SIS Commands, X3@ =, X4#

Programmer’s Guide, cont’d

Command/Response Table for IP-specific SIS Commands

Symbol definitions

X3) = Matrix name (Up to 240 alphanumeric characters)

NThe following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X3! =	Default name	Factory default name (model name + last 3 pairs of MAC address)
X3@ =	Time and date (for set)	In the format MM/DD/YY•HH:MM:SS, where:
		MM = month: 01 (January) through 12 (December)
		DD = 01 through 31
		YY = 00 through 99
		HH = 00 through 23
		MM = 00 through 59
		SS = 00 through 59
X3# =	Time and date (for read)	In the format Day,•DD•Mmm•YYYY•HH:MM:SS, where:
		Day = weekday: Mon through Sun
		DD = 01 through 31
		Mmm = month: Jan through Dec
		YYYY = 2000 through 2099
		HH = 00 through 23
		MM = 00 through 59
		SS = 00 through 59
X3$ =	GMT offset	–12.0 through +14.0. Hours and minutes removed from GMT
X3% =	Daylight Saving Time	0 = Daylight Saving Time off/ignore
		1 = Daylight Saving Time on (northern hemisphere)
		2 = Daylight Saving Time on (Europe)
		3 = Daylight Saving Time on (Brazil)
X3^ =	IP address	###.###.###.###
X3& =	Hardware (MAC) address	##-##-##-##-##-##
X3* =	Number of open connections	0 - 255
X3( =	Password	12 alphanumeric characters

NThe following characters are invalid in passwords: {space} + ~ , @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X4) = Domain name Standard domain name rules apply (for example: nnnnn@xxx.com)

NThe following characters are invalid in a domain name: {space} + ~ , = ` [ ] { } < > ‘ “ ; : \ and ?. The @ character is acceptable only as the lead-in to the domain name (such as @extron.com).

X4! =		E-mail account	65 - 72. 65 = e-mail recipient 1, 66 = 2, 67 = 3, ... 72 = recipient #8
X4@	=	E-mail address	Typical e-mail address format (for example: nnnn@xxx.com)
X4#	=	Notify when?	0	= no response	3	= both 1 & 2
			1	= fail/missing	4	= suspend
			2	= fixed/restored

X4$ =		Notification selections
X4%	=	Notify status (for read)
X4^ = DHCP
X4& =		Port #
X4*	=	Baud rate
X4( =		Parity
X5)	=	Data bits
X5! =		Stop bits
X5@ =		Port type

Matrix size 2412 and larger:	01 - 32		= input 1 through input 32
	98	= power supplies
	99	= fans
Matrix size 1616 and smaller	01	- 17	= input 1 through input 16
	17	= power supply

34- or 17-digit number. For each digit: 0 = do not notify, 1 = notify 0 =1 off, 1 = on

00 through 99 (00 = all ports) 9600, 19200, 38400, 115200

odd, even, none, mark, space (only the first letter required)

7, 8 1, 2

0 = RS-232

1 = RS-422

2 = RS-485

4-22 CrossPoint / MAV Matrix Switchers • Programmer’s Guide