Extron electronic MAV Plus Series, Ultra Series manual Ex!No

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command						Response												Additional
	(host to switcher)						(switcher to host)												description
I/O Grouping (continued)
N X1^= Group # (for I/O grouping)		1 through 4 groups (0 = no group)
Read input grouping	EI}						X1^1X1^2X1^3...X1^n]												Each X1^entry is the group
																			number assigned to an input
																			position, starting from input 1.
																			n = the maximum number of
																			inputs for this model.
Example: MAV Plus 2424	EI}						See below.
		Input 1 in group 1							Input 9 not grouped													Input 24 in group 3
	Response = group: 1 1 1						3 3 0 0 0 0 4 4 4 4										1 1 2 2 1 2 2 3 3 3 3
		Input:	01	02	03	04		05	06	07	08	09	10	11	12	13		14	15	16	17	18	19	20	21	22	23	24
Read output grouping	EO}						X1^1X1^2X1^3...X1^n]												Each X1^entry is the group
																			number assigned to an output
																			position, starting from output
																			1. n = the maximum number
																			of outputs for this model.

Names

NX(= Global or room preset # X1!= Name

X1)= Room # (for room presets) X!= Input number

00 - 32, 10 maximum for a room preset (00 = current configuration)

11 (rooms) or 12 characters (inputs, outputs, and global presets)

11 characters maximum for room names

10 maximum

01 – (maximum number of inputs for your model)

Write global preset name	EX(	X1!	NG	}	Nmg	X(		X1!]
	,						,
Example:	E1,Security 1NG}				Nmg01,Security 1]				Name global preset 1
									“Security 1”.
Read global preset name	EX(NG}				X1!]
Example:	E2NG}				Security 2]
Write room name	EX1),X1!NR}				NmrX1),X1!]
Example:	E1,Classrm 1NR}				Nmr01,Classrm 1]				Name room 1 “Classrm 1”.
Read room name	EX1)NR}				X1!]
Write room preset name	EX1)*X(,X1!NP}				NmpX1)*X(,X1!]
Example:	E			}	Nmp01*3,Podium_DVD				] Name room 1, preset 3
	1*3,Podium_DVDNP								“Podium_DVD”.
Read room preset name	EX1),X(NP}				X1!]

N• Do not use leading spaces in preset names.

•If a preset is unassigned, the X1!displays [unassigned].

•If a global preset is saved, but not yet named, the default name is Preset X(.

•If a room preset is saved, but not yet named, the default name is RmX1)PrstX(.

Write input name

EX!

X1!

NI

}

Nmi

X!

X1!]

,

,

Example:

E1,Podium camNI}

Nmi01,Podium cam]

Name input 1 “Podium cam”.

Read input name

EX!NI}

X1!]

Write output name

EX!

X1!

NO

}

Nmo

X!

X1!]

,

,

Example:

E1,Main PJ1NO}

Nmo01,Main PJ1]

Name output 1 “Main PJ1”.

Read output name

EX!NO}

X1!]

4-18 CrossPoint / MAV Matrix Switchers • Programmer’s Guide