Extron electronic MAV Plus Series manual Control buttons, Operation, cont’d, Primary functions

Operation, cont’d

Control buttons

Primary functions

Action:	Save changes	Select Preset mode	Select View mode	Cancel/escape
Indication:	Blink: save needed	Blink: Save preset	View mode selected	Flashes once
		Lit: Recall preset

ENTER PRESET VIEW ESC

Secondary functions

I/O Grouping	Action/	Select group 1.	Select group 2.	Select group 3.	Select group 4.
	indication:
Port	Action 1:		Select Configuration mode
configuration
	Action 2/	Select 9600 baud.	Select 19200 baud.	Select 38400 baud.	Select 115200 baud.
	indication:	Blink: selected	Blink: selected	Blink: selected	Blink: selected
Front panel	Action:	With Video and
locks		Audio, select Lock
		mode 2 and/or
		toggle between
		mode 0 and mode 2.
RGB delay	Action:			CrossPoint:
				In RGB Delay	In RGB Delay
				mode, decrease the	mode, increase the
				switching interval.	switching interval.
Audio	Action:			In Audio mode,	In Audio mode,
				decrease input level	increase input level
				or output volume.	or output volume.
	C	Enter button — The Enter button has two primary functions (•) and four
		secondary functions (❏):

•Save configuration or preset changes that you make on the front panel.

To create a simple configuration:

Specify RGBHV (CrossPoint switchers) or video (MAV Plus switchers), audio, or both (see I/O selection buttons [G] and [H]).

Press the desired input button (A).

Press the desired output button(s) (B).

Press the Enter button.

•Indicate that a potential tie has been created but not saved.

❏In the I/O Group mode, select group 1 and indicate the selection. See “I/O grouping” on page 3-24.

❏With the Preset, View, and Esc buttons, select Serial Port Selection and Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-54.

❏Select 9600 baud for the rear panel RS-232/RS-422 port in Serial Port Selection and Configuration mode and indicate the selection. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-54.

❏With the RGBHV/Video and Audio buttons, select front panel security Lock mode 2 or toggle between mode 0 (unlocked) and mode 2. See “Setting the front panel locks (Executive modes)” on page 3-52.

3-6 CrossPoint / MAV Matrix Switchers • Operation