Extron electronic MAV Plus Series Programmer’s Guide, cont’d, Command, ASCII command, Response

Ethernet protocol firmware version-controller firmware version-updated firmware version] 0q

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued\⤀

Command		ASCII command	Response	Additional
		(host to switcher\⤀	(switcher to host\⤀	description
Information requests
N X1& = Inputs		Total number of inputs for this switcher
X1*	= Outputs	Total number of outputs for this switcher
X1( = Part number		60-nnn-nn
X2)	= Firmware version number to second decimal place (x.xx)
X2! = Verbose firmware version-description-upload date/time
X2@ = Voltage		Positive or negative voltage and magnitude
X2# = Temperature		Degrees Fahrenheit
X2$ = Fan speed		RPM
X$ = Power supply		0 = not OK

1 = OK

Information request	I
Example:	I
MAV Plus 3216 HDA
Request part number	N

VX1&XX1*•AX1&XX1*]

V32X16•A32X16]

X1(]

VX1&XX1* is the video matrix size. AX1&XX1* is

the audio matrix size.

See appendix A for part

numbers.

NThere are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware update, which is available at www.Extron.com.

Query controller firmware	Q	X2)]
version
Example:	Q	1.23]	The factory-installed
			controller firmware version
			is 1.23 (sample value only).
Query controller firmware	0Q	X2)-X2!-X2!]	Provide a detailed status
version (verbose)			of the Ethernet protocol

firmware, the controller firmware, and any firmware upgrade. The firmware that is running is marked by an asterisk (*). A caret (^) indicates that the firmware has a bad checksum or an invalid load. ?.?? indicates that firmware is not loaded.

Response description:

Example:

	Description	* indicates the version running		Upload date and time
Response: 1.23-0.14(0.20-32x32 Series - , 00 2000 00:00:00 GMT)-0.25*(0.24-32x32 Series				-Thu, 20 Mar 2003 16:39:21 GMT)
Ethernet protocol	CrossPoint/MAV firmware version		Updated firmware version
firmware

Request system status SX2@•X2@•X2@•X2@•X2@•X2@•X2@•X2#•X2$•X2$•X$•X$]

Response description: +5V•+3.3V•+2.5V•Fan voltage•-5V•-12V•+12V•Temp•Fan1 RPM•Fan2 RPM•Primary PS•Secondary PS]

Example:		Fans receiving	11.52 V	Secondary power supply is on and Ok
	4.98•3.30•2.55•11.52•-5.21•-12.35•11.65•78.80•753•774•1•1
	5V	power system at 4.98V
				Fan 1 rotating at 753 RPM

4-20 CrossPoint / MAV Matrix Switchers • Programmer’s Guide