Extron electronic Ultra Series manual User Password field, Mail Server IP Address field, cursor

User Password field

The User Password field displays the password required to log on to the CrossPoint or MAV switcher via the LAN port as a user, without all of the administrator’s rights and privileges. Passwords are case sensitive and are limited to 12 upper-case and lower-case alphanumeric characters.

While you are logged on as a user, this field is masked with asterisks (************) as a security measure.

NAn administrator password must be created before a user password can be created.

NThe following characters are invalid in passwords: {space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Edit this field as follows:

1.	Click in the User Password field. The graphic cursor becomes a text cursor.
2.	Edit the case-sensitive password as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the User
	Password field.
4.	Click the Take button to make the password change take effect.

Mail Server IP Address field

The Mail Server IP Address field displays the IP address of the mail server that handles the e-mail for the facility in which the CrossPoint or MAV switcher is installed.

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots (periods). Each field can be numbered from 000 through 255. Leading zeroes, up to three digits total per field, are optional. Values of 256 and above are invalid.

Edit this field as follows:

1.	Click in the Mail Server IP Address field. The graphic cursor becomes a text
	cursor.
2.	Edit the IP address as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Mail
	Server IP Address field.
4.	Click the Take button to make the address change take effect.

Mail Server Domain Name field

The Mail Server Domain Name field displays the domain name that the CrossPoint or MAV switcher uses to log on to the e-mail server. Standard domain conventions (such as xxx.com) apply.

NThe following characters are invalid in a domain name:

{space} + ~ , = ‘ [ ] { } < > ’ “ ; : \ and ?. The @ character is only acceptable as the lead-in to the domain name (such as @folklore.net).

Edit this field as follows:

1.	Click in the Mail Server Domain Name field. The graphic cursor becomes a
	text cursor.
2.	Edit the name as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Mail
	Server Domain Name field.
4.	Click the Take button to make the name change take effect.

CrossPoint / MAV Matrix Switchers • Matrix Software 5-11