Extron electronic MAV Plus Series, Ultra Series Matrix Software, Matrix Switchers Control Program

Matrix Software

Matrix Switchers Control Program

The Windows®-based Extron Matrix Switchers Control Program communicates with the switcher via the Ethernet LAN port, the rear panel Remote RS-232/RS-422 port, and the front panel Configuration (RS-232) port (matrix sizes up to 1616)

to provide an easy way to set up ties and sets of ties. The program is compatible with Windows 2000, Windows XP, and later. Updates to these programs can be downloaded from the Extron Web site (http://www.extron.com).

Installing the software

The program is contained on the Extron Software Products CD-ROM, disk B.

Install the software as follows:

NFor full functionality, install both of the following programs:

•The Matrix Switchers Control Program

•The Firmware Loader

1. Insert the CD-ROM into the drive. The installation program should start

automatically. If it does not self-start, run Launch.exe from the CD. The Extron software CD window appears (figure 5-1).

Figure 5-1 — Software CD window

2.	Click the Software tab (figure 5-1).
3.	Scroll to the desired program and click Install (figure 5-2).

Figure 5-2 — Software installation

5-2 CrossPoint / MAV Matrix Switchers • Matrix Software