Extron electronic Ultra Series, MAV Plus Series manual Video MAV Plus switchers\⤀

Video (MAV Plus switchers\⤀

NVideo input and output connections are made with female BNC connectors. Some video input and output devices do not have BNC video output connectors. For these cases, a suitable cable or connector adapter is necessary. The part number for the Extron RCA-to-BNC adapter is 10-229-01.

NThe connectors for each video plane are grouped together (for example, for component/HDTV switchers, all of the Y inputs grouped together, all of the R-Y inputs grouped, and so on). Ensure that you connect the input on each video plane to the corresponding connector in the correct group (figure 2-13, through figure 2-15, below and on the next page).

The switcher can connect to up to as many as 32 S-video or composite video or up to 16 component/HDTV video, S-video, or composite video sources, depending on the model. The switcher can output to as many as 32 S-video or composite video or up to 16 component video, S-video, or composite video devices, depending on the model.

A	Video inputs — Connect component/HDTV video (figure 2-13),
	S-video (figure 2-14), or composite video (figure 2-15) inputs, as applicable, to
	these BNC connectors for each input.
B	Video outputs — Connect component/HDTV video (figure 2-13),
	S-video (figure 2-14), or composite video (figure 2-15) displays, as applicable,
	or other devices to these BNC connectors for each output. Figure 2-15 shows
	how to connect the various video formats to each MAV Plus configuration.

NThe S-video (figure 2-14) and composite video (figure 2-15) connection drawings are all on the next page.

Y INPUTS

1 7

2 8

R-Y INPUTS

1 7

2 8

B-Y INPUTS

1 7

2 8

1

MAV Plus 88, 128 HDA and HD Composite/HDTV video

MAV Plus 816, 168, 1616

HDA and HD

Component/HDTV video

Figure 2-13 — MAV Plus component/HDTV video connections

CrossPoint / MAV Matrix Switchers • Installation 2-11