Extron electronic Ultra Series This port is RS-232 only, with its default protocols as follows

NA front panel Configuration port connection and a rear panel Remote port connection can both be active at the same time.

This port is RS-232 only, with its default protocols as follows:

•	9600 baud	•	no parity	• 8 data bits
•	1 stop bit	•	no flow control

NThe maximum distances from the matrix switcher to the controlling device can vary up to 200 feet (61 m). Factors such as cable gauge, baud rates, environment, and output levels (from the switcher and the controlling device) all affect transmission distance. Distances of about 50 feet (15 m) are typically not a problem. In some cases the matrix switcher may be capable of serial communications via RS-232 up to 250 feet (76 m) away.

CrossPoint / MAV Matrix Switchers • Installation 2-21