Extron electronic MAV Plus Series, Ultra Series manual EX1 ,X# 1 ,X# 2 , ... X# n MR

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued\⤀

Command	ASCII command	Response	Additional
	(host to switcher\⤀	(switcher to host\⤀	description

Save, recall, and directly write global and room presets (continued\⤀

NX1) = Room # (for room presets) X( = Global or room preset # X@ = Input number (for tie)

X# = Output number

10 max. (Each can have up to 10 presets (X(s) assigned.)

00 - 32, 10 maximum for a room preset (00 = current configuration) 00 – (maximum number of inputs for your model) (00 = untied)

01 – (maximum number of outputs for your model))

Write room outputs EX1),X#1,X#2, ... X#nMR}

MprX1),X#1,X#2, ... X#n]

N• A room can contain a maximum of 16 outputs.

•An output can belong to only one room.

•The maximum number of rooms (X1)) is 10.

•If no room name is assigned, the default name is “Room #X1)•X#1,•X#2,•X#3”.

Example:	E8,3,04,5,6MR}			Mpr8,03,04,05,06]
Read room outputs	EX1)	MR	}	X( X#1		,	X#2	, ...	X#n]
				,
Example:	E3MR}			Class 1,01,02,08,09]
Recall room preset	X1) X(	.		Rmm	X1)•			Rpr	X(]
	*
Directly write a room preset	E+X1)*X(PX@*X#!X@*X#%X@*X#$ ... X@*X#&}
				RmmX1)•SprX(]

Example:Esc+7*3P12*7&11*5$4*5%6*6! Rmm07•Spr03]

See notes.

Outputs 3, 4, 5, and 6 are assigned to room 8.

Outputs 1, 2, 8, and 9 are

assigned to room 3, which named “Class 1”. Command character is a period.

Enter as many ties as are valid for this model. Tie all (!), tie RGBHV (&), tie video (%), and tie audio ($) commands are all valid.

Brackets are shown to separate ties for clarity only. Create preset 3 for room 7, which ties audio input 12 to output 7, video input 11 to output 5, RGBHV input 4 to output 5, and video and

audio input 6 to output 6.

4-14 CrossPoint / MAV Matrix Switchers • Programmer’s Guide