Extron electronic Ultra Series X5 X5 X5, CrossPoint / MAV Matrix Switchers Programmer’s Guide

X5# = Verbose mode	0	= clear/none (default for Telnet connection)
	1	= verbose mode (default for RS-232/RS-422 connection)
	2	= tagged responses for queries
	3	= verbose mode and tagged for queries

NIf tagged responses is enabled (modes 2 and 3), all read commands return the constant string and the value as the set command does (for example, the read matrix name command ECN}, returns Ipn•X3)]).

X5$

X5%

X5^

X5&

X5*

=	Flow control	hardware, software, none (only the first letter required)
= Data pacing (in ms between bytes)		0000 (default) - 1000
= Time (in 10-ms increments) to wait for characters		10 (= 100 ms, default) - 32767
= Time (in 10-ms increments) to wait between characters		2	(= 20 ms, default) - 32767
=	Port timeout interval (in 10-sec. increments)	1	(= 10 seconds) - 65000 (default is 30 = 300 seconds = 5 minutes)

CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-23