Extron electronic MAV Plus Series Matrix Software, cont’d, Edit the address as desired, cursor

Matrix Software, cont’d

Edit this field as follows:

1.	Click in the Matrix IP address field. The graphic cursor becomes a text cursor.
2.	Edit the address as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Matrix IP
	Address field.
4.	Click the Take button to make the address change take effect.

Extron Name/Descriptor field

The Extron Name/Descriptor field contains the name used as the “from” information when the CrossPoint or MAV switcher e-mails notification of its failed or repaired status. This descriptor can be changed to any valid name, up to 12 alphanumeric characters.

NThe following characters are invalid in the Extron Name/Descriptor field: {space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Edit this field as follows:

1.	Click in the Extron name/descriptor field. The graphic cursor becomes a text
	cursor.
2.	Edit the name as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Extron
	Name/Descriptor field.
4.	Click the Take button to make the name change take effect.

Gateway IP address field

The Gateway IP Address field identifies the address of the gateway to the mail server to be used if the CrossPoint or MAV switcher and the mail server are not on the same subnet.

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots (periods). Each field can be numbered from 000 through 255. Leading zeroes, up to 3 digits total per field, are optional. Values of 256 and above are invalid.

Edit this field as follows:

1. Click in the Gateway IP Address field. The graphic cursor becomes a text

	cursor.
2.	Edit the address as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Gateway
	IP Address field.
4.	Click the Take button to make the address change take effect.

5-8 CrossPoint / MAV Matrix Switchers • Matrix Software