Extron electronic MAV Plus Series, Ultra Series 1 2 3 4 5 6 7 8 15 16 17 18 19 20 21 22 23 24 31

Operation, cont’d

Example 1: Creating a set of video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your action.

NThis example assumes that there are no ties in the current configuration. 1. Press and release the Esc button (figure 3-5).

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

Figure 3-5 — Clear all selections

2. To select video and audio for the tie, if necessary, press and release the RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio button until the buttons both light (figure 3-6).

I / O

RGBHV AUDIO

Press the RGBHV/Video button to toggle on and off. The button lights green when selected.

Press the Audio button to toggle on and off. The button lights red when selected.

Figure 3-6 — Select RGBHV or video and audio

3. Press and release the input 5 button (figure 3-7).

Press and release the Input 5 button.

The button lights amber (matrix sizes up to 1616) or green (matrix sizes 2412 through 3232).

1 2 3 4 5 6 7 8 15 16 17 18 19 20 21 22 23 24 31 32

I

N P U T S

Figure 3-7 — Select an input

3-14 CrossPoint / MAV Matrix Switchers • Operation