Extron electronic MAV Plus Series, Ultra Series manual Matrix Software, cont’d, Preferences menu

Matrix Software, cont’d

Preferences menu

Immediate changes — Causes configuration changes to take effect immediately.

Hold/verify changes — Delays implementation of configuration changes until the Changes – Take button is pressed.

Ties as lines — Displays ties as lines (figure 5-16).

Figure 5-16 — Ties shown as lines

Ties as crosspoints — Displays ties as a grid of inputs and outputs (figure 5-17).Ties that have been made are indicated as amber (video and audio), green (video only), and red (audio only) boxes. Ties that will take effect when you click the Take button are indicated by +. Ties that will be broken when you click the Take button are indicated by –.

Figure 5-17 — Ties shown as crosspoints

Frequency read options (CrossPoint only) — Allows you to set the input signal detection (DSVP) feature as follows:

•To never sample and display the sync or no sync status

(set this option to None)

•To automatically refresh the display

(set this option to Automatically every 10 seconds)

•To sample the sync and update the display whenever you make a configuration change (set this option to On demand or by refresh).

Limit ties to same group — Allows you to limit the creation of ties using the program to inputs and outputs that are in the same group (similar to front panel operation).

5-22 CrossPoint / MAV Matrix Switchers • Matrix Software