Extron electronic Ultra Series, MAV Plus Series manual Ezg

Command/response table for SIS commands (continued\⤀

Command	ASCII command	Response	Additional
	(host to switcher\⤀	(switcher to host\⤀	description
Lock (executive\⤀ modes
N X$ = Lock mode	0, 1, or 2

NSee “Setting the front panel locks (Executive modes)” in chapter 3, “Operation”, for more information on the Lock modes.

Lock all front panel functions	1X	Exe1]	Enable Lock mode 1.
Lock advanced front panel	2X	Exe2]	Enable Lock mode 2.
functions
Unlock all front panel	0X	Exe0]	Enable Lock mode 0.
functions
View lock status	X	X$]

Resets

NX( = Global or room preset # X1) = Room # (for room presets)

00 - 32, 10 maximum for a room preset (00 = current configuration) 10 maximum

Reset global presets and names	EZG}
Reset one global preset	EX(ZG}
Reset RGB delays	EZD}
Reset audio input levels	EZA}
Reset audio output levels	EZV}
Reset all mutes	EZZ}
Reset room map	EZR}
Reset individual room	EX1)ZR}
Reset all room presets and	EZP}
names
Reset individual room preset	EX1)*X(ZP}
Reset individual room preset	EX1)*X(ZP}
and name
Reset flash	EZFFF}
Reset whole switcher	EZXXX}
Absolute reset	EZQQQ}

Zpg]	Clear all global presets and
	their names.
ZpgX(]	Clear global preset X(.
Zpd]	Reset all RGB delays to 0.0
	seconds.
Zpa]	Reset all audio input levels
	(gain and attenuation) to 0 dB.
Zpv]	Reset all audio output
	levels (volume) to 100% (no
	attenuation).
Zpz]	Reset all audio or RS-232
	mutes.
Zpr]	Clear all room definitions.
ZprX1)]	Delete room X1).
Zpp]	Clear an individual room
	preset and name.
ZppX1)*X(]	Clear individual room preset
	and name.
ZppX1)*X(]	Clear an individual room
	preset and name.
Zpf]	Reset flash memory (erase all
	user-supplied files).
Zpx]	Clear all ties and presets,
	reset all audio gains to 0 dB,
	and reset volume to 100%.
Zpq]	Similar to Reset whole
	switcher, plus clear the IP
	address to 192.168.254.254
	and subnet mask to
	255.255.000.000.

CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-19