Extron electronic Ultra Series, MAV Plus Series manual CrossPoint / MAV Matrix Switchers Operation

D	Preset button — The Preset button has two primary functions (•) and three
	secondary functions (❏):
	•	Activates Save Preset mode to save a configuration as a preset and Recall
		Preset mode to activate a previously-defined preset.
	•	Blinks when Save Preset mode is active and lights steadily when Recall
		Preset mode is active.
	❏	In the I/O Group mode, select group 2 and indicate the selection.
		See “I/O grouping” on page 3-24.
	❏	With the Enter, View, and Esc buttons, select Serial Port Selection and
		Configuration mode. See “Selecting the rear panel Remote port protocol
		and baud rate” on page 3-54.
	❏	Select 19200 baud for the rear panel RS-232/RS-422 port in Serial Port
		Selection and Configuration mode and indicate the selection. See “Selecting
		the rear panel Remote port protocol and baud rate” on page 3-54.
	View (<) button — The View (<) button has one primary function (•) and six
E secondary functions (❏):
	•	Select and indicate View-onlymode, which displays the current
		configuration.

NView-onlymode also provides a way to mute and unmute the outputs. See “Muting and unmuting video and/or audio outputs” on page 3-35.

❏In the I/O Group mode, select group 3 and indicate the selection.

See “I/O grouping” on page 3-24.

❏(CrossPoint switchers) Decrease the RGB delay of switches to the selected output. See “Setting RGB delay (CrossPoint Switchers)” on page 3-28.

❏(Audio models) Decrease the audio level of the selected input.

See “Viewing and adjusting the input audio level (audio models)” on page 3-38.

❏(Audio models) Decrease the volume of the selected output.

See “Viewing and adjusting the output volume (audio models)” on page 3-44.

❏With the Enter, Preset, and Esc buttons, select Serial Port Selection and Configuration mode. See “Selecting the rear panel Remote port protocol and baud rate” on page 3-54.

❏Select 38400 baud for the rear panel RS-232/RS-422 port in Serial Port Selection and Configuration mode, and indicate the selection See “Selecting the rear panel Remote port protocol and baud rate” on page 3-54.

CrossPoint / MAV Matrix Switchers • Operation 3-7