Harman-Kardon AVR 5550 Advanced Features / Multiroom Operation, Semi-OSD Settings, Installation

Page 38

Advanced Features / Multiroom Operation

Semi-OSD Settings

The semi-OSD system places one line messages at the lower third of the video display screen whenever the Volume, Input Source, Surround mode or tuner frequency of any of the configura- tion settings are changed. The semi-OSD system is helpful in that enables you to have feedback on any control changes or remote commands using the video display when it is difficult to view the front-panel displays. However, you may occasionally prefer to turn these displays off for a particular listening session. You may also want to adjust the length of time the displays remain on the screen. Both of those options are possible with the AVR 5550.

To turn off the semi-OSD system, you will need to make an adjustment in the ADVANCED SELECT menu (Figure 11). To start the adjustment, press the OSD button Lto bring the MASTER MENU to the screen. Press the

⁄Button D, until the on-screen › cursor is next to the ADVANCED line. Press the Set Button Fto enter the ADVANCED SELECT menu.

At the ADVANCED SELECT menu make certain that the on-screen › cursor is next to the SEMI OSD line by pressing the ⁄/¤ buttons Das needed. Next, press the › button so that the word OFF is highlighted in

the video display.

Note that this setting is temporary and will remain active only until it is changed or until the AVR 5550 is turned off. Once the unit is turned off, the semi-OSD displays will remain activated, even if they were switched off for the previous listening session.

To change the length of time that the semi-OSD displays remain on the screen, go to the ADVANCED SELECT Menu as out- lined earlier, and press the ⁄/¤ buttons Das needed, until the on-screen › cursor is next to the SEMI-OSD TIME OUT line. Next, press the ‹/› Buttons E until the desired time in seconds is displayed. Note that unlike most of the other options in this menu, this is a permanent setting change, and the time-out entry will remain in effect until it is changed, even when the unit is turned off.

If you wish to make other adjustments in the menu, press the ⁄/¤ Buttons Duntil the on- screen › cursor is next to the desired setting or the BACK T O MASTER MENU line and press the Set button F. If you have no other adjustments to make, press the OSD Button Lto exit the menu system.

Full-OSD Time Out Adjustment

The FULL OSD menu system is used to simplify the setup and adjustment of the AVR 5550 using a series of on-screen menus. The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inactivity before they disappear from the screen or Time Out. This Time Out is a safety measure to prevent the menu text from burning into the CRTs in your monitor or projector, which might happen if they were left on indefinitely. However, some viewers may prefer a slightly longer or shorter period before the Time Out display.

To change the Full-OSD Time Out, you will need to make an adjustment in the ADVANCED SELECT menu (Figure 11). To start the adjustment, press the OSD button Lto bring the MASTER MENU to the screen. Press the

⁄button D, until the on-screen ¤ cursor is next to the ADVANCED line. Press the Set Button Fto enter the ADVANCED SELECT menu (Figure 11).

At the ADVANCED SELECT menu make certain that the on-screen › cursor is next to the FULL OSD TIME OUT line by pressing the ⁄/¤ Buttons Das needed. Next, press the ‹/ › buttons E until the desired time is displayed in seconds. Note that unlike most of the other options in this menu, this is a permanent setting change, and the time-out entry will remain in effect until it is changed, even when the unit is turned off.

If you wish to make other adjustments in the menu, press the ⁄/¤ Buttons Duntil the on-screen › cursor is next to the desired setting or the BACK T O MASTER MENU line and press the Set button F. If you have no other adjustments to make, press the OSD Button Lto exit the menu system.

Multiroom Operation

The AVR 5550 is fully equipped to operate as the control center for a complete multiroom system that is capable of sending one source to a sec- ond zone in the house while separate source is listened to in the main room. In addition to pro- viding for control over the selection of the remote source and its volume, the AVR 5550 offers a comprehensive range of options for powering the speakers in the second zone.

•Using the line-levelMultiroom Audio Outputs , the selected source may be fed to optional, external power amplifiers that may be matched to the specifics of the installation.

•When the main room system is configured for 5.1 operation, the Surround Back Left/Right amplifier channels may be used to power the remote zone so that no additional amplifiers are required.

•Using built-in A-BUS Ready technology, optional A-BUS modules may be connected to the AVR 5550 via a single Category Five wire, so that remote zone speakers may be powered directly from the module or keypad without the need for additional power, IR sensor or volume control wires to be run to the second zone.

In addition, the AVR 5550 includes a remote IR sensor input so that remote control commands from the Zone II remote included with the unit may be transmitted to the unit, while standard IR input/output jacks allow the remote zone’s commands to be sent to compatible IR-con- trolled source devices.

Installation

Although simple remote room systems may be installed by the average do-it-yourself hobbyist, the complexity of your multizone/multiroom sys- tem involves running wires inside of walls where the services of a specially trained installer may be required. Regardless of who does the work, please remember that local building codes may govern in-wall electrical work, including proper specification of any wiring used and the way in which it is connected. You are responsible for making certain that all Multiroom installation work is done properly and in compliance with all applicable codes and regulations.

For standard installations, follow the instructions shown on page 16 for the connection of speaker wire and IR remote wiring to the AVR 5550.

For installations where the Surround Back Left/Right amplifier channels are used to power the remote zone, make certain that the system is configured for that type of operation, as shown on page 37.

For installations where A-BUS modules are used, follow the instructions provided with the A-BUS remote modules or keypads.

Additional information will also be made avail-

38ADVANCED FEATURES / MULTIROOM OPERATION

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Power for the Digital Revolution AVR 5550 Audio/ Video ReceiverTable of Contents Declaration of ConformityIntroduction Description and FeaturesFront panel analog A/V inputs, switch- able to outputs Variety of modes and two modes of VMAxUnpacking Safety InformationImportant Safety Information Front Panel Controls For more information See page 40 for more information on tuning stationsCoaxial Ó To select between the OpticalMulti Indicator Auto Indicator Front Panel Information DisplayRear Panel Connections Digital Audio Outputs Connect theseSwitched Outlet AC Power Cord Jack Connect the AC Video source selected by the receiver’s video switcherUnswitched Outlet + and negative terminalsRear Panel Connections Logic 7 Mode Select Button P Transport Controls Main Remote Control FunctionsDirect Button K Tuning Up/Down Channel/8 Channel Direct Input Movies Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Scart A/V Connections Important Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aRGB signals can be pathed through System and Power Connections Speaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display First Turn OnInput Setup Speaker SetupSurround Subwoofer Surround Setup Night Mode Settings Adjustments for Other InputsDelay Settings To call up the menuPress and hold the SPL Indicator Select Output Level AdjustmentUsing EzSet Sensor and Indicator off So that on is highlightedUp the Volume until you can hear the test noise clearly Surround Mode Chart OperationNo surround channels No delay availableMix of the in-phase material of the left and right channels But no surround speakersChannel/8-Channel Direct Input Basic OperationSource Selection Volume Up/Down Buttons Controls and Use of HeadphonesSurround Mode Selection One of the most important featuresPCM Audio Playback Digital Audio PlaybackDolby Digital MP3 Audio PlaybackSpeaker/Channel Indicators MP 3 DSP mode found in the newDigital Bitstream Indicators Selecting a Digital SourceFront Panel In/Outputs Night ModeTape Recording Or 2 OutputsIndicator Select Output Level Adjustment With Source SignalsMemory Backup Surround Amplifier Channel Assignment Advanced FeaturesTurn On Volume Level Display BrightnessFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationSemi-OSD Settings InstallationRS-232 Control Multiroom SetupMultiroom Operation Multiroom OperationRDS Operation Tuner OperationBasic Tuner Operation RDS station Program Search PTYIf the unit you wish to program into Programming the Remote with CodesDirect Code Entry Must be repeated firstLearning Codes from a Remote Programming the RemoteCode Readout Erasing Learned CodesPress the AVR Selector Erasing Macro CommandsMacro Programming Remote With Other Devices Volume Punch-ThroughProgrammed Device Functions 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Scan Scan + Rewind Play Fast Fwd Record Stop Pause Power On Power Off Mute TV Select Channel +Power On Power Off VID 3 Select Channel + Prev Channel 1 2 3 4 5 6 7 ClearPower Switch 1 is pushed Troubleshooting GuideProcessor Reset Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer International

AVR 5550 specifications

The Harman-Kardon AVR 5550 is a highly regarded audio/video receiver that embodies a perfect blend of power, performance, and versatility. Designed for the discerning home theater enthusiast, this model delivers a remarkable audio-visual experience with its robust set of features and cutting-edge technologies.

One of the standout characteristics of the AVR 5550 is its impressive power output. With 100 watts per channel across seven channels, it is capable of driving a wide range of speakers with clarity and authority. The amplifier section employs Harman-Kardon's legendary technology to ensure low distortion and a dynamic listening experience. This level of power allows users to experience immersive sound in their home theaters, making it ideal for movie nights and music playback alike.

Equipped with a variety of connectivity options, the AVR 5550 is designed to integrate seamlessly with modern audio and video sources. The receiver features numerous HDMI inputs to accommodate multiple devices, including Blu-ray players, gaming consoles, and streaming devices. Additionally, it provides optical and coaxial digital inputs, as well as analog inputs for older equipment. This comprehensive set of connectivity options ensures that users can enjoy a wide range of media without the hassle of frequently switching cables.

The AVR 5550 also includes advanced surround sound processing technologies, like Dolby Digital and DTS, which contribute to its ability to create an enveloping soundstage. The integration of Harman-Kardon’s own Logic 7 technology enhances the audio experience by utilizing multi-channel processing to extract the best sound from stereo and multi-channel sources alike.

In terms of design, the AVR 5550 sports a sleek, modern aesthetic that fits well into any home theater setup. The intuitive user interface and remote control make it easy for users to navigate settings and choose their desired audio modes. The receiver also features a built-in AM/FM tuner, expanding its functionality beyond just home theater use.

Lastly, the AVR 5550 emphasizes user-friendly features such as on-screen displays and programmable presets, allowing personal preferences to be easily adjusted. Whether for casual listening or full-fledged cinematic experiences, the Harman-Kardon AVR 5550 stands out as a dependable and high-quality option that caters to all audiovisual needs. Its fusion of power, versatility, and advanced technologies makes it a favorite among audio enthusiasts around the world.
Top Page Image Contents