To connect and remove tools
To connect the tools, insert end of tool into the extension wand and snap into position. To disconnect, press down on the center of the spring latch and remove tool.
Tools may also be attached to the handle by rotating the plastic latch ring to accept the button projec- tion on the tool. Then, turn the latch ring as shown to lock the tool in place.
To remove the tool, reverse the above procedure.
The power cord leading from the hose connection to the receptacle on the cleaner base need not be connected when using the clean- ing tools. However, to avoid damage to the cord, leave cord connected to the recept- acle on the cleaner.
To clean hard to reach areas
The tools attached to the curved wand, as shown, will enable you to clean many hard to reach areas; especially crown moldings, tops of drapery rods, shelves, and pic- ture frames.