Hoover QS Quiet manual

Page 16

Slide belt side of agitator into place, pushing the agitator slightly to left, pulling it forward and then down.

Roll agitator to make sure belt is positioned properly.

The cover attaches at the front of the nozzle. Place the notched edge at the front of the cover into the groove in the nozzle base.

While maintaining front connec- tion, rotate cover over nozzle base and pull nozzle cord through opening in cover.

Turn nozzle over and replace screws.

Image 16

Contents Page Maintenance Your cleaner is a model no Has a serial numberIndex Page Extension wands, cleaning tools and hose UnpackingCarrying Handle Furniture Guard Cord Storage Hook Wall Floor BrushCrevice Tool Multi-Purpose Brush Cover Latch Attach power nozzle How to assembleConnect hose Page Handle adjustments How to useEdge cleaning Nozzle connector Cleaning ToolsWall/floor brush For walls To clean hard to reach areas To connect and remove toolsHow to store To clean stairsCord wrap Maintenance BAGPage To clean secondary filter When to replace the belt on power nozzleHow to replace the belt Secondary FilterPage Page When to replace brushes How to replace agitator brushesAgitator Brushes 48445017Lubricatiori LJser check list Lo-80 S3181/89 Litho USA 56513-130