Hoover QS Quiet manual LJser check list

Page 19

1

I

lJser check list

This appliance was inspected thoroughly and was in good operating condi- tion when it was shipped from the factory. If a minor problem develops, it usually can be remedied quite easily when the cause is identified. Accord- ingly, this check list is provided for your convenience.

Problem

Possible cause

Possible solution

 

 

 

A. Cleaner

1. Not firmly plugged in.

1. Plug unit in firmly.

won’t run

2.

No voltage in wall plug.

2.

Check fuse or breaker.

 

3.

Blown fuse/tripped breaker.

3.

Replace fuse/reset breaker.

 

 

 

B. Cleaner

1. Bag full.

1. Change throw away bag.

suction

2.

Obstruction in hose, wands

2.

Remove foreign object.

low

 

or nozzle connector.

 

 

 

3.

Secondary filter dirty.

3.

Clean filter.

 

4.

Bag not opening.

4.

Open bag by pulling folds.

 

5.

Suction regulator control

5.

Check to be sure suction

 

 

improperly set.

 

regulator is set properly.

 

6.

Hose not properly connected

6.

Insure hose properly

 

 

to cleaner.

 

connected.

 

 

 

C. Agitator

1. Hose power cord not firmly

1. Plug firmly into receptacle

won’t run

 

plugged in.

 

on cleaner base and under-

 

 

 

 

neath handle.

 

2.

Broken or worn belt.

2.

Replace belt.

 

 

 

D. Nozzle

1. Low cleaner suction.

1. See Item B.

won’t pick

2. Obstruction in nozzle

2.

Remove foreign object.

up

 

connector.

 

 

 

3.

Agitator not running.

3.

See Item C.

 

4. Agitator brushes worn.

4.

Replace brushes.

 

 

 

 

 

If the problem persists, check the Yellow Pages of your telephone book under “Vacuum Cleaners- Household” for your nearest Hoover Factory Service Center or Authorized Warranty Service Dealer where approved HOOVER service and genuine HOOVER replacement parts may be obtain- ed. The warranty provided with this product has a listing of the Hoover Factory Service Centers. If you are unable to obtain the information you need from the Yellow Pages, contact a Hoover Factory Service Center to find your nearest Authorized Warranty Service Dealer. For service under warranty, follow the instructions in the Warranty provided with this pro- duct.

Always identify your cleaner by model number when requesting informa- tion or ordering replacement parts. (The model number appears on the bot- tom of the cleaner. 1

If further assistance is needed, contact the Hoover Company Con- sumer Affairs Department, North Canton, Ohio 44720, 216-499-9200.

18

Image 19
Contents Page Maintenance Your cleaner is a model no Has a serial numberIndex Page Unpacking Extension wands, cleaning tools and hoseCarrying Handle Furniture Guard Cord Storage Hook Wall Floor BrushCrevice Tool Multi-Purpose Brush Cover Latch Attach power nozzle How to assembleConnect hose Page Handle adjustments How to useEdge cleaning Nozzle connector Cleaning ToolsWall/floor brush For walls To connect and remove tools To clean hard to reach areasHow to store To clean stairsCord wrap BAG MaintenancePage Secondary Filter To clean secondary filterWhen to replace the belt on power nozzle How to replace the beltPage Page 48445017 When to replace brushesHow to replace agitator brushes Agitator BrushesLubricatiori LJser check list Lo-80 S3181/89 Litho USA 56513-130