How to use
Handle adjustments
The handle has two positions when used with the power noz- zle: Upright and Operating.
To lower handle to the Operating position, place your foot on the power nozzle and push the han- dle down.
Automatic nozzle adjustment
The power nozzle adjusts auto- matically to effectively clean hard surface floors and all carpet from low pile to shag.
However, the nozzle is not rec- ommended for very irregular floor surfaces such as brick, slate and certain parquet floors. To clean these floors, use the Wall/Floor Brush.
It is suggested that you use the power nozzle with the Suction Regulator closed for full suction. If the power nozzle is difficult to push, open the Suction Regula- tor.
Edge cleaning
Brushed edge cleaning is provid- ed on the right side of the nozzle to remove imbedded dirt in carpet near baseboards and furniture. Guide the right side of the nozzle parallel to the edge of the carpet or furniture for brushed edge clean- ing.
Standard edge cleaning is pro- vided on the left side of the nozzle to remove surface dust and litter. Guide the left side of the nozzle parallel to the edge of the carpet for standard edge cleaning.
7