Hoover QS Quiet manual Cleaning Tools, Nozzle connector, Wall/floor brush For walls

Page 9

Nozzle connector

Removing larger items from carpet and floor surfaces before vacuuming will help maintain the cleaning effectiveness of your cleaner. However, if loss of suction power should occur, proceed as follows: make sure Suction Regulator is closed; check bag for fullness and make sure folds are open; check hose for obstructions by removing wands and power nozzle, turning cleaner ON, and feeling end of hose for suction - remove any obstruc- tions; check wands for obstructions by connecting wands to hose, remov- ing power nozzle from wands, turning cleaner ON and feeling end of wands for suction - remove any obstructions. If loss of suction power still occurs, check nozzle for obstructions.

Disconnect cleaner from elec- trical outlet and disconnect power nozzle from extension wands.

While holding nozzle, push nozzle connector down to lowest posi- tion.

Look into nozzle connector and remove any obstructions.

-CoNNECTOR 1

Cleaning Tools

The cleaning tools have many uses. Select the tool best suited for the cleaning task from the descriptions below. Adjust the Suction Regulator to select the amount of suction appropriate to the cleaning task.

 

1. Crevice tool For radiators,

1

dresser drawers, spaces between

kitchen equipment.

I

 

2. Multi-purpose brush For up-

c

holstered furniture, draperies,

2

mattresses, clothing, carved furni-

 

ture, books, lamps, Venetian

&

blinds, baseboards.

 

 

3. Wall/floor brush For walls

 

and very irregular hard surface

 

floors such as brick and slate.

8

Image 9
Contents Page Your cleaner is a model no Has a serial number MaintenanceIndex Page Unpacking Extension wands, cleaning tools and hoseWall Floor Brush Carrying Handle Furniture Guard Cord Storage HookCrevice Tool Multi-Purpose Brush Cover Latch How to assemble Attach power nozzleConnect hose Page How to use Handle adjustmentsEdge cleaning Cleaning Tools Nozzle connectorWall/floor brush For walls To connect and remove tools To clean hard to reach areasTo clean stairs How to storeCord wrap BAG MaintenancePage When to replace the belt on power nozzle To clean secondary filterHow to replace the belt Secondary FilterPage Page How to replace agitator brushes When to replace brushesAgitator Brushes 48445017Lubricatiori LJser check list Lo-80 S3181/89 Litho USA 56513-130