How to assemble
1. Connect hose
To connect hose, insert hose into opening of cleaner lining up the ar- row on the hose with the dot on the cleaner. Turn the hose clock- wise until it lines up with the bar on the cleaner and latch locks into place.
When the hose is attached proper- ly, the hose cord plug will reach to the receptacle on the cleaner.
Insert the plug firmly and as deep into the receptacle as possible.
To disconnect hose, first remove hose cord plug from receptacle. Then, depress latch away from hose connection opening in clean- er. While holding latch, turn the hose counterclockwise until the arrow lines up with dot on the cleaner.
L A T C H m&
7T?Zff-
2. Attach power nozzle
Attach power nozzle at the end of the straight wand by fitting the button projection on the nozzle connector into the opening at the end of the wand. Be sure the noz- zle is locked in place.
To release, press down on the center of the spring latch and remove nozzle.
CONNECTOR
5