Harman-Kardon Explore the Features and Specifications of AVR 1600 and Harman Kardon Models

Page 52

AVR 1600 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode, Continuous Average Power (FTC)

40 Watts per channel, 20Hz–20kHz, @ <0.07% THD, both channels driven into 8 ohms

Seven-Channel Surround Modes

Power per Individual Channel

Front L & R channels:

30 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

30 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R Back) channels: 30 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic® I/II

40dB

Dolby® Digital (AC-3)

55dB

DTS®

55dB

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1Vp-p/75 ohms

 

Output Level/Impedance

1Vp-p/75 ohms

 

Video Frequency Response

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

(Component Video)

10Hz–100MHz (–3dB)

 

HDMI

Version 1.3a with 10-bit Deep Color

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

65W idle, 540W maximum

 

 

(7 channels driven)

 

Dimensions

(Product)

(Shipping)

Width

17-5/16 inches (440mm)

21-7/8 inches (555mm)

Height

6-1/2 inches (165mm)

10-1/2 inches (266mm)

Depth

15 inches (382mm)

18-5/16 inches (465mm)

 

(Product)

(Shipping)

Weight

20.5 lb (9.3kg)

25.3 lb (11.5kg)

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

Features, specifications and appearance are subject to change without notice.

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±25 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

520–1720kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge III logo are trademarks of Harman International Industries, Incorporated.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

CEA is a registered trademark of the Consumer Electronics Association.

Manufactured under license from Dolby Laboratories. Dolby, the double-D symbol and Pro Logic

are registered trademarks of Dolby Laboratories. MLP Lossless is a trademark of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467 and other U.S. and worldwide patents issued and pending. DTS, DTS-ES and DTS Neo:6 are registered trademarks, and DTS 96/24, DTS-HD, DTS-HD High Resolution Audio and DTS-HD Master Audio are trademarks, of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

SACD is a trademark of Sony Corporation.

TiVo is a registered trademark of TiVo Inc.

Please register your AVR 1600 at www.harmankardon.com. You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

52

Image 52
Contents AVR Safety Information Important Safety InstructionsService Instructions Outdoor Use Marking Wet Location MarkingImportant Safety Information UnpackingTable of Contents Introduction Surround ModesSupplied Accessories Audio InputsAudio/Video Inputs Digital Audio InputsPanel FrontControls On When the AVR is turned on, this LED turns white Tuning Press these buttons to tune a radio stationVolume Knob Turn this knob to raise or lower the volume FRONT-PANEL ControlsRear ConnectionsREAR-PANEL Connections Main Remote Control Functions AM/FMMain Remote Control Functions Main Remote Control Functions Introduction to Home Theater Typical Home Theater SystemMultichannel Audio Harman International the Harman Kardon parent company LogicConnecting Source Devices to the AVR Speaker ConnectionsSubwoofer Audio ConnectionsVideo Connections Analog AudioDigital Video Analog VideoAntennas USB PortSpeaker Placement Front Speaker PlacementPlacement of Surround Speakers in a 5.1-Channel System Subwoofer PlacementGetting Started Source Assignment WorksheetGetting Started Installation Turn on your source device Step Nine Turn On the AVRTwo steps are required the first time you turn on the AVR Using the ON-SCREEN Menu System Initial SetupConfigure the AVR 1600, Using EzSet/EQ Technology Select Cancel to return to the Master menu Set Up SourcesSource Indicates the currently selected source. Use the 7/3 System Settings Channel InputsInitial Setup Operation Using the Radio Selecting a Surround ModeRecording AUX InputOperation Analog Audio Signals Digital Audio SignalsAdvanced Functions Audio Processing and Surround SoundManual Speaker Setup Dolby Surround SettingsVideo Game Logic 7 Game Step Three Manual Setup Menu Step ONE Determine Speaker CrossoverStep TWO Measure Speaker Distances Number of SpeakersSub Mode Step Four Setting Channel Output Levels ManuallyCrossover Menu Distance MenuAudio Settings System SettingsAdvanced Remote Control Functions Dim FunctionPunch-Through Programming To program punch-through control while operating any deviceResetting the Remote Processor ResetMacros MemoryTroubleshooting Guide Symptom Cause SolutionAppendix Table A1 Recommended Source Component ConnectionsTable A3 Speaker/Channel Setting Defaults Table A2 Source Setting DefaultsTable A4 Delay Setting Defaults Table A5 Source Input Settings Table A6 Speaker/Channel SettingsDigital Channel Level SubwooferTable A7 Remote Control Codes Table A8 System SettingsFeature Default Setting Your Setting Source Input Product Type circle oneSurround Mode Description Incoming Bitstream or Signal Table A9 Surround ModesTable A9 DTS 2/2/.0 or .1, 3/2/.0 or Channel music recordingsLogic 7 Game Channel StereoRemote Control Function List Reference Table A10 Remote Control Function List DVD CD/CD-RTable A10 TV VID3Table A11 Remote Control Product Codes TV Table A13 Remote Control Product Codes CD Table A12 Remote Control Product Codes VCRTable A12 Table A14 Remote Control Product Codes DVD Table A15 Remote Control Product Codes SATTable A13 Table A14Table A16 Remote Control Product Codes Tape Table A17 Remote Control Product Codes CableTable A15 Table A17AVR 1600 Technical Specifications Audio Section