Harman-Kardon AVR 160 owner manual Getting Started

Page 20

GETTING STARTED

NOTES:

• For multichannel disc players, if both the device and the TV use HDMI connections for video, then check the owner’s manual for the device to determine whether it transmits multichannel audio via its HDMI output. If it does, then no separate audio connection is required. If not, write down the multichannel analog audio connection in addition to any other audio type. An analog video connection, in addition to the HDMI connection, will be required. See page 25 for more information.

• If the device uses an HDCP-compliant DVI output for video, then connect it to one of the AVR’s HDMI Inputs using an HDMI-to-DVI adapter, but a separate audio connection will always be required.

• The AUX Input jack on the rear panel requires a 1/8" (3,5 mm) stereo audio mini-plug. Purchase a stereo audio cable with 1/8" (3,5 mm) mini-plugs at both ends. Connect one end to the 1/8" (3,5 mm) headphone jack found on may portable audio players, and plug the other end of the cable into the AUX Input jack. The AUX Input may also be used with audio devices that have conventional left and right analog audio output jacks. Purchase a cable that has left and right “RCA-style” plugs at one end and a 1/8" (3,5 mm) mini-plug at the other end to connect the player to the AUX Input.

5.Decide which sources to connect to each of the video inputs: Assign only one unique video input to each source. Use the best type of video connection available for each source.

• If your system-best video connection is “HDMI”, select up to four HDMI source devices and assign them to one of the three numbered HDMI sources.

• If your system-best video connection is “Component”, or if you have source devices with component video outputs that weren’t assigned to one of the HDMI Inputs, assign up to three devices to one of the three numbered Component Video Inputs.

• If your system-best video connection is “Composite Video”, or if you have source devices with composite video outputs that have not been assigned to any other video input, then assign the devices to one of the four conventional sources (DVD, Video 1, 2 or 3). The composite video inputs are dedicated to each source and may not be reassigned. Use the composite video input for the source you assigned to the device in number 2 above.

NOTE: If the source device is a video recorder that will be used to record from other devices connected to the AVR, assign the recorder to the Video 1 Input, which has a recording output. Any of the Coaxial or Optical Digital Inputs may be assigned to the recorder for audio, if it is capable of making digital audio recordings. To make audio-only recordings, assign the Tape source to the recorder. It is not necessary to connect TiVo or Video Recorder devices that will only record from their direct cable or satellite television signals to the AVR’s recording outputs.

6.Decide which audio inputs to connect to each source: Assign only one unique digital audio input to each digital source. Analog audio inputs are used for analog sources, or as secondary connections for digital sources for backup or for recording. The 2-channel analog audio inputs are dedicated to the four conventional sources (DVD, Video 1, 2 or 3) and may not be reassigned. Use the 2-channel analog audio input for the source you assigned to the device in number 2 above.

• Any source using an HDMI Input requires no additional connection for audio unless:

♦ The source doesn’t output multichannel audio through its HDMI output. Make a second connection to the 6-/8-Channel Analog Audio Inputs.

♦ The source has an HDCP-compliant DVI output for video only. Assign a digital or analog audio input.

• For any source whose best audio connection is optical or coaxial digital

audio, assign one of the three Optical or three Coaxial Digital Audio Inputs. Do not connect both types of digital audio to the same source device.

• You may assign one of the 2-Channel Analog Audio Inputs to a digital source.

• You may also assign the 6-/8-Channel Analog Audio Inputs, if available, to a digital source. See page 25.

• Use the 2-channel Analog Audio Input for the source selected for the device in number 2 above when the device is an analog source.

NOTE: If the source device is a digital audio recorder, it may be used with any of the Coaxial or Optical Digital Audio Inputs and the Coaxial Digital Audio Output. Both coaxial and optical signals are available at either digital audio output. To make analog recordings, assign either the Analog 2 or 4 Audio Inputs to the recorder, as both have recording outputs.

20

Image 20
Contents AVR Important Safety Information Safety InformationImportant Safety Instructions Installation Location CleaningDo Not Open the Cabinet Moving the UnitTable of Contents Introduction Thank you for choosing a Harman Kardon productHarman Kardon AVR 160 7.1-Channel Audio/ Video Receiver Audio SectionSupplied Accessories Audio InputsAudio/Video Inputs Digital Audio InputsTuning Press these buttons to tune a radio station FRONT-PANEL ControlsVolume Knob Turn this knob to raise or lower the volume Always make a separate audio connection REAR-PANEL ConnectionsUse an HDMI-to-DVI adapter REAR-PANEL Connections Remote Control Functions AM/FMAVR Selector Press to switch the remote to AVR device mode AUX Controls a device connected to the Auxiliary InputRDS Activates RDS functions for FM Radio Introduction to Home Theater Typical Home Theater SystemMultichannel Audio Surround ModesConnecting Source Devices to the AVR ConnectionsSpeaker Connections SubwooferDigital Audio Analog AudioAntennas Video ConnectionsDigital Video Analog VideoSpeaker Placement Front Speaker PlacementPlacement of Surround Speakers in a 5.1- Channel System Placement of Surround Speakers in a 7.1- Channel SystemGetting Started Source Assignment WorksheetGetting Started Installation Step Eight Program Sources Into the Remote Step Nine Turn On the AVRTurn on your source device Two steps are required the first time you turn on the AVRConfigure the AVR 160, Using EzSet/EQ Technology Initial SetupUsing the On-Screen Menu System HDMI-Equipped Multichannel Disc Player Set Up SourcesChannel Inputs System Settings Dim FunctionOperation Headphones Using the RadioRDS Tuning Source SelectionRecording RDS Display OptionsProgram Search PTY Program Type PTYSelecting a Surround Mode Surround Modes MenuAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Indicates that an LFE channel is present Dolby Surround SettingsAdvanced Functions Manual Speaker Setup Step Three Manual Setup MenuStep ONE Determine Speaker Crossover Step TWO Measure Speaker DistancesSub Mode Number of SpeakersCrossover Menu Distance MenuWhen you have finished, press the OSD Button Audio SettingsStep Four Setting Channel Output Levels Manually Advanced Remote Control Functions Resetting the RemotePunch-Through Programming MacrosTable A1 Recommended Source Component Connections Appendix Default settingsAppendix Table A4 Delay Setting Defaults Table A2 Source Setting DefaultsTable A3 Speaker/Channel Setting Defaults Table A5 Source Input Settings Table A6 Speaker/Channel SettingsAUX Tuner LFETable A7 Remote Control Codes Table A8 System SettingsTable A9 Surround Modes VCR, PVR, DMCDTS-HD See below Mode Group Tuner Setting to be offDTS-ES Discrete DTS StereoTable A10 - Remote Control Function List 50 51 54 55DVD AUX Table A13 Remote Control Product Codes CD Table A11 Remote Control Product Codes TVTable A12 Remote Control Product Codes VCR Table A17 Remote Control Product Codes Cable Table A14 Remote Control Product Codes DVDTable A15 Remote Control Product Codes SAT Memory Troubleshooting GuideProcessor Reset Technical Specifications FM Tuner SectionAM Tuner Section Video Section

AVR 160 specifications

The Harman-Kardon AVR 160 is a versatile and powerful audio/video receiver that delivers a remarkable home theater experience. Designed for audio enthusiasts and casual listeners alike, this model combines cutting-edge technology, sophisticated design, and intuitive controls.

One of the standout features of the AVR 160 is its robust 7.1-channel surround sound output, which supports the latest audio formats including Dolby TrueHD and DTS-HD Master Audio. This allows users to enjoy a truly immersive sound experience when watching movies or playing video games. With a total power output of 75 watts per channel, the AVR 160 ensures that every sound detail is crystal clear, from explosive action sequences to the softest dialogue.

Another significant aspect of the AVR 160 is its advanced connectivity options. It comes equipped with multiple HDMI inputs, allowing you to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4 version support ensures compatibility with 3D video and offers audio return channel (ARC) functionality, simplifying connections with your TV. Additionally, the receiver features wide compatibility with legacy devices through analog audio inputs, as well as USB ports for direct playback of your music collections.

The AVR 160 also includes Harman's proprietary technology, like the EZSet/EQ automatic speaker calibration system. This feature effortlessly optimizes speaker performance by analyzing the acoustic properties of your room and adjusting settings accordingly. Users can also benefit from the integrated SiriusXM and Spotify support, allowing streaming of music directly through the receiver.

In terms of design, the AVR 160 presents a sleek aesthetic that complements any home entertainment setup. The minimalist front panel, with its bright display and easy-to-use controls, makes operation straightforward. Whether you are adjusting settings or selecting inputs, the receiver’s user-friendly interface enhances the overall experience.

In conclusion, the Harman-Kardon AVR 160 is an exceptional receiver that boasts remarkable audio quality, extensive connectivity options, innovative technologies, and a stylish design. Whether you're a movie enthusiast, music lover, or gaming aficionado, this receiver is well-equipped to meet diverse entertainment needs and elevate your audio experience to new heights.