Harman-Kardon AVR 160 owner manual Front Speaker Placement, Subwoofer Placement

Page 18

SPEAKER PLACEMENT

Optimally, the speakers should be placed in a circle with the listening position at its center. The speakers should be angled so that they directly face the listening position.

Front Speaker Placement

The center speaker is placed either on top of, below or mounted on the wall above or below the video display screen.

The front left and right speakers are placed along the circle, about 30 degrees from the center speaker and angled toward the listener.

Place the front left/right and center speakers at the same height, preferably at about the same height as the listener’s ears. The center speaker should be no more than approx. 60 cm above or below the left/right speakers. If you’re using only two speakers with the AVR 160, place them in the front left and right positions.

Placement of the surround speakers depends on the number of speakers in your system.

Purple SUB 1

White FL

90°

150°

SL

Blue

Green

C

FR Red

30°30°

150° 90°

SR

Gray

 

Green

Purple SUB1

C

 

White FL

FR Red

30°

30°

110°

110°

150°

150°

SL

SR

Blue

Gray

Brown SBL

SBR Tan

Figure 15 – Speaker Placement (7.1- Channel System)

NOTE: Some speaker manufacturers offer 6.1-channel speaker systems, for 6.1-channel surround sound formats, such as Dolby Digital EX, DTS-ES Discrete and Matrix modes and DTS Neo:6 mode. Using the AVR 160 in a 6.1-channel configuration is not recommended. The 6.1-channel formats will sound better when played through a 7.1-channel system. The same surround back channel information is played through both surround back speakers, but with twice the power and clarity.

To use the AVR 160 with a 6.1-channel speaker system, place the single surround back speaker directly behind the listener, but do not connect it until after you have run the EzSet/EQ procedure for a 5.1-channel system. After the EzSet/EQ process finishes, connect the surround back speaker to the Surround Back Left Speaker Output. Then follow the directions in the Advanced Features section for manual setup of the surround back speaker.

Alternate placement for Side Surround

Alternate placement for Side Surround

Left Speaker (Blue)

Right Speaker (Gray)

Figure 14 – Speaker Placement (5.1- Channel System)

Placement of Surround Speakers in a 5.1- Channel System

The side surround speakers should be placed 110 degrees from the center speaker, slightly behind and angled toward the listener. Alternatively, place them behind the listener, with each surround speaker facing the opposite- side front speaker. See Figure 14. The surround speakers may be placed a little higher than the listener’s ears.

Placement of Surround Speakers in a 7.1- Channel System

In a 7.1- channel system, the side surround speakers are placed 90 degrees from the center speaker, directly to either side of the listening position. The surround back left and right speakers are placed 150 degrees from the center speaker, or directly facing the opposite-side front speaker. See Figure 15.

Subwoofer Placement

Placement of the subwoofers is less critical, since low-frequency sounds are omnidirectional. Placing each subwoofer close to a wall or in a corner will reinforce the low frequencies, and may create a “boomy” sound. Temporarily place one subwoofer where the listener normally sits, then walk around the room until the low frequencies sound best. Place the subwoofer in that spot.

NOTE: Your receiver will sound its best when the same model or brand loudspeaker is used for all positions.

18

Image 18
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Do Not Open the Cabinet Installation LocationCleaning Moving the UnitTable of Contents Harman Kardon AVR 160 7.1-Channel Audio/ Video Receiver IntroductionThank you for choosing a Harman Kardon product Audio SectionAudio/Video Inputs Supplied AccessoriesAudio Inputs Digital Audio InputsTuning Press these buttons to tune a radio station FRONT-PANEL ControlsVolume Knob Turn this knob to raise or lower the volume REAR-PANEL Connections Use an HDMI-to-DVI adapterAlways make a separate audio connection REAR-PANEL Connections Remote Control Functions AM/FMAVR Selector Press to switch the remote to AVR device mode AUX Controls a device connected to the Auxiliary InputRDS Activates RDS functions for FM Radio Multichannel Audio Introduction to Home TheaterTypical Home Theater System Surround ModesSpeaker Connections Connecting Source Devices to the AVRConnections SubwooferDigital Audio Analog AudioDigital Video AntennasVideo Connections Analog VideoPlacement of Surround Speakers in a 5.1- Channel System Speaker PlacementFront Speaker Placement Placement of Surround Speakers in a 7.1- Channel SystemGetting Started Source Assignment WorksheetGetting Started Installation Turn on your source device Step Eight Program Sources Into the RemoteStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRInitial Setup Using the On-Screen Menu SystemConfigure the AVR 160, Using EzSet/EQ Technology Set Up Sources Channel InputsHDMI-Equipped Multichannel Disc Player System Settings Dim FunctionOperation RDS Tuning HeadphonesUsing the Radio Source SelectionProgram Search PTY RecordingRDS Display Options Program Type PTYSelecting a Surround Mode Surround Modes MenuAnalog Audio Signals Digital Audio SignalsAudio Processing and Surround Sound Dolby Surround Settings Advanced FunctionsIndicates that an LFE channel is present Step ONE Determine Speaker Crossover Manual Speaker SetupStep Three Manual Setup Menu Step TWO Measure Speaker DistancesCrossover Menu Sub ModeNumber of Speakers Distance MenuAudio Settings Step Four Setting Channel Output Levels ManuallyWhen you have finished, press the OSD Button Punch-Through Programming Advanced Remote Control FunctionsResetting the Remote MacrosAppendix Default settings AppendixTable A1 Recommended Source Component Connections Table A2 Source Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults AUX Tuner Table A5 Source Input SettingsTable A6 Speaker/Channel Settings LFETable A9 Surround Modes Table A7 Remote Control CodesTable A8 System Settings VCR, PVR, DMCDTS-HD DTS-ES Discrete See below Mode GroupTuner Setting to be off DTS StereoTable A10 - Remote Control Function List 50 51 54 55DVD AUX Table A11 Remote Control Product Codes TV Table A12 Remote Control Product Codes VCRTable A13 Remote Control Product Codes CD Table A14 Remote Control Product Codes DVD Table A15 Remote Control Product Codes SATTable A17 Remote Control Product Codes Cable Troubleshooting Guide Processor ResetMemory AM Tuner Section Technical SpecificationsFM Tuner Section Video Section

AVR 160 specifications

The Harman-Kardon AVR 160 is a versatile and powerful audio/video receiver that delivers a remarkable home theater experience. Designed for audio enthusiasts and casual listeners alike, this model combines cutting-edge technology, sophisticated design, and intuitive controls.

One of the standout features of the AVR 160 is its robust 7.1-channel surround sound output, which supports the latest audio formats including Dolby TrueHD and DTS-HD Master Audio. This allows users to enjoy a truly immersive sound experience when watching movies or playing video games. With a total power output of 75 watts per channel, the AVR 160 ensures that every sound detail is crystal clear, from explosive action sequences to the softest dialogue.

Another significant aspect of the AVR 160 is its advanced connectivity options. It comes equipped with multiple HDMI inputs, allowing you to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4 version support ensures compatibility with 3D video and offers audio return channel (ARC) functionality, simplifying connections with your TV. Additionally, the receiver features wide compatibility with legacy devices through analog audio inputs, as well as USB ports for direct playback of your music collections.

The AVR 160 also includes Harman's proprietary technology, like the EZSet/EQ automatic speaker calibration system. This feature effortlessly optimizes speaker performance by analyzing the acoustic properties of your room and adjusting settings accordingly. Users can also benefit from the integrated SiriusXM and Spotify support, allowing streaming of music directly through the receiver.

In terms of design, the AVR 160 presents a sleek aesthetic that complements any home entertainment setup. The minimalist front panel, with its bright display and easy-to-use controls, makes operation straightforward. Whether you are adjusting settings or selecting inputs, the receiver’s user-friendly interface enhances the overall experience.

In conclusion, the Harman-Kardon AVR 160 is an exceptional receiver that boasts remarkable audio quality, extensive connectivity options, innovative technologies, and a stylish design. Whether you're a movie enthusiast, music lover, or gaming aficionado, this receiver is well-equipped to meet diverse entertainment needs and elevate your audio experience to new heights.