Harman-Kardon AVR 160 owner manual AUX Controls a device connected to the Auxiliary Input

Page 12

REMOTE CONTROL FUNCTIONS

HDMI 2 and 3: Each code set controls a source device (VCR/PVR, DVD player or cable/satellite set-top box) connected to one of these inputs.

AUX: Controls a device connected to the Auxiliary Input.

Any given button may have different functions, depending on which component is being controlled. Some buttons are labeled with these functions. For example, the Sleep Button is labeled for use as the Channel Up Button when controlling a television or cable box. See Table A10 in the appendix for listings of the different functions for each type of component.

IR Transmitter Lens: As buttons are pressed on the remote, infrared codes are emitted through this lens.

Power On Button: Press this button to turn on the AVR or another device. The Main Power Switch must first have been switched on.

Mute Button: Press to mute the AVR 160’s speaker and headphone outputs. To end the muting, press this button, adjust the volume, or turn off the receiver.

Program Indicator: This LED lights up or flashes in one of three colors as the remote is programmed with codes.

Power Off Button: Press to turn off the AVR 160 or another device.

AVR Selector: Press to switch the remote to AVR device mode.

Source Selectors: Press one of these buttons to select a source device, e.g., DVD, CD, cable TV, satellite or HDTV tuner. This will also turn on the receiver and switch the remote’s device mode to operate the source.

AM/FM Button: Press this button to select the tuner as the source, or to switch between the AM and FM bands.

6-/8-Channel Input Selector: Press this button to select the

6-/8-Channel Inputs as the audio source. If a signal is present at the component video inputs assigned to this source, it will be used. If not, the receiver will use the video input and remote control codes for the last- selected analog video source.

Test Tone: Press this button to activate the test tone for manual output- level calibration.

TV/Video: This button has no effect on the receiver, but is used to switch video inputs on some video source components.

Sleep Button: Press this button to activate the sleep timer, which turns off the receiver after a programmed period of time of up to 90 minutes.

Channel Controls: These buttons have no effect on the receiver, but are used to change channels on TVs and some video sources.

Volume Control: Press to raise or lower the volume, which will be shown in decibels (dB) in the Message Display.

On-Screen Display (OSD): Press this button to activate the on-screen menu system.

Channel Level: Press this button to adjust the output levels for any channel so that all speakers sound equally loud at the listening position.

Speaker Setup: Press this button to configure speaker sizes, that is, the low-frequency capability of each speaker.

Navigation (KLM N) and OK Buttons: These buttons are used to make selections within the on-screen menu system, or when accessing the functions of the four buttons surrounding this area of the remote – Channel Level, Speaker Setup, Digital Input or Delay.

Digital Input Select: Press this button to select the specific digital audio input (or analog audio input) to which the current source is connected.

Delay: Press this button to set delay times that compensate for placing the speakers at different distances from the listening position, or to resolve a “lip sync” issue that may be caused by digital video processing.

NOTE: The Channel Level, Speaker Setup, Digital Input Select and Delay functions may also be adjusted using the OSD on-screen menus. In addition, the EzSet/EQ system may be used to adjust the Channel Level, Speaker Setup and Delay settings automatically.

Numeric Keys: Use these buttons to enter radio station frequencies or to select station presets. Press the Direct Button before entering the station frequency.

Tuning Mode: This button toggles between manual (one frequency step at a time) and automatic (seeks frequencies with acceptable signal strength) tuning mode. It also toggles between stereo and mono modes when an FM station is tuned.

Memory: After you have tuned a particular radio station, press this button, then the Numeric Keys, to save that station as a radio preset.

Tuning: Press these buttons to tune a radio station. Depending on whether the tuning mode has been set to manual or automatic, each press will either change one frequency step at a time, or seek the next frequency with acceptable signal strength.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Installation Location CleaningDo Not Open the Cabinet Moving the UnitTable of Contents Introduction Thank you for choosing a Harman Kardon productHarman Kardon AVR 160 7.1-Channel Audio/ Video Receiver Audio SectionSupplied Accessories Audio InputsAudio/Video Inputs Digital Audio InputsTuning Press these buttons to tune a radio station FRONT-PANEL ControlsVolume Knob Turn this knob to raise or lower the volume REAR-PANEL Connections Use an HDMI-to-DVI adapterAlways make a separate audio connection REAR-PANEL Connections Remote Control Functions AM/FMAVR Selector Press to switch the remote to AVR device mode AUX Controls a device connected to the Auxiliary InputRDS Activates RDS functions for FM Radio Introduction to Home Theater Typical Home Theater SystemMultichannel Audio Surround ModesConnecting Source Devices to the AVR ConnectionsSpeaker Connections SubwooferDigital Audio Analog AudioAntennas Video ConnectionsDigital Video Analog VideoSpeaker Placement Front Speaker PlacementPlacement of Surround Speakers in a 5.1- Channel System Placement of Surround Speakers in a 7.1- Channel SystemGetting Started Source Assignment WorksheetGetting Started Installation Step Eight Program Sources Into the Remote Step Nine Turn On the AVRTurn on your source device Two steps are required the first time you turn on the AVRInitial Setup Using the On-Screen Menu SystemConfigure the AVR 160, Using EzSet/EQ Technology Set Up Sources Channel InputsHDMI-Equipped Multichannel Disc Player System Settings Dim FunctionOperation Headphones Using the RadioRDS Tuning Source SelectionRecording RDS Display OptionsProgram Search PTY Program Type PTYSelecting a Surround Mode Surround Modes MenuAnalog Audio Signals Digital Audio SignalsAudio Processing and Surround Sound Dolby Surround Settings Advanced FunctionsIndicates that an LFE channel is present Manual Speaker Setup Step Three Manual Setup MenuStep ONE Determine Speaker Crossover Step TWO Measure Speaker DistancesSub Mode Number of SpeakersCrossover Menu Distance MenuAudio Settings Step Four Setting Channel Output Levels ManuallyWhen you have finished, press the OSD Button Advanced Remote Control Functions Resetting the RemotePunch-Through Programming MacrosAppendix Default settings AppendixTable A1 Recommended Source Component Connections Table A2 Source Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults Table A5 Source Input Settings Table A6 Speaker/Channel SettingsAUX Tuner LFETable A7 Remote Control Codes Table A8 System SettingsTable A9 Surround Modes VCR, PVR, DMCDTS-HD See below Mode Group Tuner Setting to be offDTS-ES Discrete DTS StereoTable A10 - Remote Control Function List 50 51 54 55DVD AUX Table A11 Remote Control Product Codes TV Table A12 Remote Control Product Codes VCRTable A13 Remote Control Product Codes CD Table A14 Remote Control Product Codes DVD Table A15 Remote Control Product Codes SATTable A17 Remote Control Product Codes Cable Troubleshooting Guide Processor ResetMemory Technical Specifications FM Tuner SectionAM Tuner Section Video Section

AVR 160 specifications

The Harman-Kardon AVR 160 is a versatile and powerful audio/video receiver that delivers a remarkable home theater experience. Designed for audio enthusiasts and casual listeners alike, this model combines cutting-edge technology, sophisticated design, and intuitive controls.

One of the standout features of the AVR 160 is its robust 7.1-channel surround sound output, which supports the latest audio formats including Dolby TrueHD and DTS-HD Master Audio. This allows users to enjoy a truly immersive sound experience when watching movies or playing video games. With a total power output of 75 watts per channel, the AVR 160 ensures that every sound detail is crystal clear, from explosive action sequences to the softest dialogue.

Another significant aspect of the AVR 160 is its advanced connectivity options. It comes equipped with multiple HDMI inputs, allowing you to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4 version support ensures compatibility with 3D video and offers audio return channel (ARC) functionality, simplifying connections with your TV. Additionally, the receiver features wide compatibility with legacy devices through analog audio inputs, as well as USB ports for direct playback of your music collections.

The AVR 160 also includes Harman's proprietary technology, like the EZSet/EQ automatic speaker calibration system. This feature effortlessly optimizes speaker performance by analyzing the acoustic properties of your room and adjusting settings accordingly. Users can also benefit from the integrated SiriusXM and Spotify support, allowing streaming of music directly through the receiver.

In terms of design, the AVR 160 presents a sleek aesthetic that complements any home entertainment setup. The minimalist front panel, with its bright display and easy-to-use controls, makes operation straightforward. Whether you are adjusting settings or selecting inputs, the receiver’s user-friendly interface enhances the overall experience.

In conclusion, the Harman-Kardon AVR 160 is an exceptional receiver that boasts remarkable audio quality, extensive connectivity options, innovative technologies, and a stylish design. Whether you're a movie enthusiast, music lover, or gaming aficionado, this receiver is well-equipped to meet diverse entertainment needs and elevate your audio experience to new heights.
Top Page Image Contents