Harman-Kardon Step-by-Step Installation for Your Harman Kardon AVR Receiver
Page 21

You are now ready to begin installing the AVR. Before beginning to connect the various components to the receiver, turn off all devices, including the AVR 160, and unplug their power cords. Don’t plug in any of the power cords until you have finished making all of your connections.

The receiver generates heat. Select a location that leaves several centimeters of space on all sides. Avoid completely enclosing the receiver inside an unventilated cabinet. Place components on separate shelves rather than stacking them directly on top of the receiver. Never block the AVR’s ventilation slots on the top and side panels. Doing so could cause the AVR to overheat, with potentially serious consequences. Some shelf surface finishes are delicate. Try to select a location with a sturdy surface finish.

Almost all of the following installation steps are optional, depending on your system. Skip any step that does not apply to your system.

STEP ONE – Connect Source Devices

Leaving all AC power cords unplugged, connect the source devices to the AVR using the audio and video inputs you assigned in Table 2.

STEP TWO – Connect TV

Connect the system-best video input on the TV to the corresponding video monitor output on the AVR.

If your video display or source device is not HDMI-capable, you will need to use one of the analog video connections (composite or component video).

STEP THREE – Connect Loudspeakers

After you have placed your loudspeakers in the room as explained on page 18, connect each speaker to its color-coded terminal on the AVR. Maintain proper polarity by connecting the negative terminal on the speaker (usually colored black) to the negative terminal on the AVR (also colored black); and the positive terminal on the speaker (usually red) to the positive terminal on the AVR (color varies by channel; see Table 1 on page 15).

If you have a subwoofer, connect its line-level or LFE input to the purple Subwoofer Output.

NOTE: If the subwoofer only has speaker-level inputs, after you have configured the AVR using EzSet/EQ technology as described on page 23, connect the subwoofer’s left and right speaker input terminals to the AVR’s Front Left and Front Right Speaker Outputs, then connect the front left and right main speakers to the subwoofer’s left and right speaker output terminals. Consult the owner’s manual for the subwoofer for specific installation instructions.

STEP FOUR – Connect FM Antenna

Connect the included FM antenna to the 75-ohm FM antenna terminal.

INSTALLATION

STEP FIVE – Connect AM Antenna

Assemble the included AM antenna (see Figure 16) and connect it to the AM and Ground antenna terminals. The antenna is not polarized, and either lead may be connected to either terminal.

Figure 16 – AM Antenna Assembly

STEP SIX – Plug in AC Power Cords

Before plugging the AVR into an unswitched electrical outlet, make sure the Main Power Switch behind the front-panel door is off, to prevent the possibility of damaging the AVR in case of a transient power surge.

Plug the AC Power cord into an unswitched AC outlet.

It is recommended that you copy the appropriate information from the Table 2 worksheet to Table A5 in the appendix for future reference, in the event changes are made to the system components.

STEP SEVEN – Insert Batteries in Remote

The AVR 160 remote control uses three AAA batteries (included).

To remove the battery cover located on the back of the remote, firmly press the ridged depression and slide the cover toward the top of the remote.

Insert the batteries as shown in Figure 17, observing the correct polarity.

Figure 17 –  Remote Battery Compartment

Point the remote’s lens toward the front panel of the AVR 160. Make sure no objects, such as furniture, are blocking the remote’s path to the receiver. Bright lights, fluorescent lights and plasma video displays may interfere with the remote’s functioning. The remote has a range of about 7 meter, depending on the lighting conditions. It may be used at an angle of up to 30 degrees to either side of the AVR.

If the remote seems to operate intermittently, or if pressing a button on the remote does not cause the AVR Settings Button or one of the Source Selectors to light, check or replace the batteries.

ENGLISH

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents AVR Safety Information Important Safety InstructionsImportant Safety Information Cleaning Installation LocationDo Not Open the Cabinet Moving the UnitTable of Contents Thank you for choosing a Harman Kardon product IntroductionHarman Kardon AVR 160 7.1-Channel Audio/ Video Receiver Audio SectionAudio Inputs Supplied AccessoriesAudio/Video Inputs Digital Audio InputsFRONT-PANEL Controls Tuning Press these buttons to tune a radio stationVolume Knob Turn this knob to raise or lower the volume REAR-PANEL Connections Use an HDMI-to-DVI adapterAlways make a separate audio connection REAR-PANEL Connections AM/FM Remote Control FunctionsAUX Controls a device connected to the Auxiliary Input AVR Selector Press to switch the remote to AVR device modeRDS Activates RDS functions for FM Radio Typical Home Theater System Introduction to Home TheaterMultichannel Audio Surround ModesConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferAnalog Audio Digital AudioVideo Connections AntennasDigital Video Analog VideoFront Speaker Placement Speaker PlacementPlacement of Surround Speakers in a 5.1- Channel System Placement of Surround Speakers in a 7.1- Channel SystemSource Assignment Worksheet Getting StartedGetting Started Installation Step Nine Turn On the AVR Step Eight Program Sources Into the RemoteTurn on your source device Two steps are required the first time you turn on the AVRInitial Setup Using the On-Screen Menu SystemConfigure the AVR 160, Using EzSet/EQ Technology Set Up Sources Channel InputsHDMI-Equipped Multichannel Disc Player Dim Function System SettingsOperation Using the Radio HeadphonesRDS Tuning Source SelectionRDS Display Options RecordingProgram Search PTY Program Type PTYSurround Modes Menu Selecting a Surround ModeAnalog Audio Signals Digital Audio SignalsAudio Processing and Surround Sound Dolby Surround Settings Advanced FunctionsIndicates that an LFE channel is present Step Three Manual Setup Menu Manual Speaker SetupStep ONE Determine Speaker Crossover Step TWO Measure Speaker DistancesNumber of Speakers Sub ModeCrossover Menu Distance MenuAudio Settings Step Four Setting Channel Output Levels ManuallyWhen you have finished, press the OSD Button Resetting the Remote Advanced Remote Control FunctionsPunch-Through Programming MacrosAppendix Default settings AppendixTable A1 Recommended Source Component Connections Table A2 Source Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults Table A6 Speaker/Channel Settings Table A5 Source Input SettingsAUX Tuner LFETable A8 System Settings Table A7 Remote Control CodesTable A9 Surround Modes VCR, PVR, DMCDTS-HD Tuner Setting to be off See below Mode GroupDTS-ES Discrete DTS Stereo50 51 54 55 Table A10 - Remote Control Function ListDVD AUX Table A11 Remote Control Product Codes TV Table A12 Remote Control Product Codes VCRTable A13 Remote Control Product Codes CD Table A14 Remote Control Product Codes DVD Table A15 Remote Control Product Codes SATTable A17 Remote Control Product Codes Cable Troubleshooting Guide Processor ResetMemory FM Tuner Section Technical SpecificationsAM Tuner Section Video Section

AVR 160 specifications

The Harman-Kardon AVR 160 is a versatile and powerful audio/video receiver that delivers a remarkable home theater experience. Designed for audio enthusiasts and casual listeners alike, this model combines cutting-edge technology, sophisticated design, and intuitive controls.

One of the standout features of the AVR 160 is its robust 7.1-channel surround sound output, which supports the latest audio formats including Dolby TrueHD and DTS-HD Master Audio. This allows users to enjoy a truly immersive sound experience when watching movies or playing video games. With a total power output of 75 watts per channel, the AVR 160 ensures that every sound detail is crystal clear, from explosive action sequences to the softest dialogue.

Another significant aspect of the AVR 160 is its advanced connectivity options. It comes equipped with multiple HDMI inputs, allowing you to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4 version support ensures compatibility with 3D video and offers audio return channel (ARC) functionality, simplifying connections with your TV. Additionally, the receiver features wide compatibility with legacy devices through analog audio inputs, as well as USB ports for direct playback of your music collections.

The AVR 160 also includes Harman's proprietary technology, like the EZSet/EQ automatic speaker calibration system. This feature effortlessly optimizes speaker performance by analyzing the acoustic properties of your room and adjusting settings accordingly. Users can also benefit from the integrated SiriusXM and Spotify support, allowing streaming of music directly through the receiver.

In terms of design, the AVR 160 presents a sleek aesthetic that complements any home entertainment setup. The minimalist front panel, with its bright display and easy-to-use controls, makes operation straightforward. Whether you are adjusting settings or selecting inputs, the receiver’s user-friendly interface enhances the overall experience.

In conclusion, the Harman-Kardon AVR 160 is an exceptional receiver that boasts remarkable audio quality, extensive connectivity options, innovative technologies, and a stylish design. Whether you're a movie enthusiast, music lover, or gaming aficionado, this receiver is well-equipped to meet diverse entertainment needs and elevate your audio experience to new heights.
Top Page Image Contents