Harman-Kardon AVR 160 owner manual Operation

Page 26

OPERATION

Now that you have installed your components and completed a basic configuration, you are ready to begin enjoying your home theater system.

Turning On the AVR 160

Flip the rear-panel Main Power Switch to the “On” position. The Power Indicator on the front panel will turn amber, indicating that the AVR is in Standby mode and is ready to be turned on. The Main Power Switch is normally left on.

There are several ways to turn on the AVR 160:

a)Press the Standby/On Switch on the front panel.

b)Using the remote, press the AVR Power On Button or any of the Source Selectors.

To turn the receiver off, press either the Standby/On Switch on the front panel or the Power Off Button on the remote control. Unless the receiver will not be used for an extended period of time, leave the Main Power Switch on. When the Main Power Switch is turned off, any settings you have programmed will be preserved for up to four weeks.

IMPORTANT NOTE: If the PROTECT message ever appears in the Message Display, turn off the AVR and unplug it. Check all speaker wires for a short. If none is found, bring the unit to an authorized Harman Kardon service center for inspection and repair before using it again.

Volume Control

Adjust the volume either by turning the knob on the front panel (clockwise to increase volume or counterclockwise to decrease volume), or by pressing the Volume Control on the remote. The volume is displayed as a negative number of decibels (dB) below the 0dB reference point.

0dB is the maximum recommended volume for the AVR 160. Although it’s possible to turn the volume to a higher level, doing so may damage your hearing and your speakers. For certain more dynamic audio materials, even 0dB may be too high, allowing for damage to equipment. Use caution with regard to volume levels.

Mute Function

To temporarily mute all speakers and the headphones, press the Mute Button on the remote. Any recording in progress will not be affected. The MUTE message will appear in the display as a reminder. To restore normal audio, press the Mute Button again, or adjust the volume. Turning off the AVR will also end muting.

Sleep Timer

The sleep timer sets the AVR to play for up to 90 minutes and then turn off automatically.

Press the Sleep Settings Button on the remote, and the time until turn-off will be displayed. Each additional press of the Sleep Button decreases the play time by 10 minutes, with a maximum of 90 minutes. The SLEEP OFF setting disables the sleep timer.

If you press the Sleep Button after the timer has been set, the remaining play time will be displayed. Press the Sleep Button again to change the play time.

tone controls

You may boost or cut either the treble or the bass frequencies by up to 10dB.

Press the Tone Mode Button once. This will indicate whether the tone controls are in or out of the circuitry. With the TONE IN message displayed, press the Tone Mode Button repeatedly to access TREBLE MODE and BASS MODE. Use the KL Buttons to change the treble or bass settings.

To return the tone controls to 0, or “flat” response, press the Tone Mode Button, and then use the KL Buttons to display the TONE OUT message, which preserves any changes you have made to the bass or treble settings for later use. To reactivate your changes, the tone control must be set to TONE IN.

The display will return to normal a few seconds after your last command.

You may also adjust the tone controls using the full-OSD menu system. Press the OSD Button on the remote to view the Master menu. With the cursor pointing to the INPUT SETUP line, press the OK Button to display the Input Setup menu and view the current tone settings. To make changes to the TONE, BASS or TREBLE settings, use the KL Buttons to move the cursor to the setting, and use the M N Buttons to adjust it. It isn’t necessary to press the OK Button to enter the new setting.

When you have finished, either wait until the display times-out and disappears, press the OSD Button to clear the display, or move the cursor to the BACK TO MASTER MENU line and select it to make other changes using the menu system.

NOTE: The AVR 160 does not have a conventional balance control. The speaker output level calibration process compensates for any characteristics of your room or loudspeakers, and it is recommended that you leave the settings as they are after you have completed Initial Setup. However, you may manually adjust the levels of the left and right channels – decreasing one and increasing the other by the same amount – using the Channel Adjust submenu, as described in the Advanced Functions section. This achieves the same effect as a balance control.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents AVR Important Safety Information Safety InformationImportant Safety Instructions Do Not Open the Cabinet Installation LocationCleaning Moving the UnitTable of Contents Harman Kardon AVR 160 7.1-Channel Audio/ Video Receiver IntroductionThank you for choosing a Harman Kardon product Audio SectionAudio/Video Inputs Supplied AccessoriesAudio Inputs Digital Audio InputsTuning Press these buttons to tune a radio station FRONT-PANEL ControlsVolume Knob Turn this knob to raise or lower the volume Always make a separate audio connection REAR-PANEL ConnectionsUse an HDMI-to-DVI adapter REAR-PANEL Connections Remote Control Functions AM/FMAVR Selector Press to switch the remote to AVR device mode AUX Controls a device connected to the Auxiliary InputRDS Activates RDS functions for FM Radio Multichannel Audio Introduction to Home TheaterTypical Home Theater System Surround ModesSpeaker Connections Connecting Source Devices to the AVRConnections SubwooferDigital Audio Analog AudioDigital Video AntennasVideo Connections Analog VideoPlacement of Surround Speakers in a 5.1- Channel System Speaker PlacementFront Speaker Placement Placement of Surround Speakers in a 7.1- Channel SystemGetting Started Source Assignment WorksheetGetting Started Installation Turn on your source device Step Eight Program Sources Into the RemoteStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRConfigure the AVR 160, Using EzSet/EQ Technology Initial SetupUsing the On-Screen Menu System HDMI-Equipped Multichannel Disc Player Set Up SourcesChannel Inputs System Settings Dim FunctionOperation RDS Tuning HeadphonesUsing the Radio Source SelectionProgram Search PTY RecordingRDS Display Options Program Type PTYSelecting a Surround Mode Surround Modes MenuAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Indicates that an LFE channel is present Dolby Surround SettingsAdvanced Functions Step ONE Determine Speaker Crossover Manual Speaker SetupStep Three Manual Setup Menu Step TWO Measure Speaker DistancesCrossover Menu Sub ModeNumber of Speakers Distance MenuWhen you have finished, press the OSD Button Audio SettingsStep Four Setting Channel Output Levels Manually Punch-Through Programming Advanced Remote Control FunctionsResetting the Remote MacrosTable A1 Recommended Source Component Connections Appendix Default settingsAppendix Table A4 Delay Setting Defaults Table A2 Source Setting DefaultsTable A3 Speaker/Channel Setting Defaults AUX Tuner Table A5 Source Input SettingsTable A6 Speaker/Channel Settings LFETable A9 Surround Modes Table A7 Remote Control CodesTable A8 System Settings VCR, PVR, DMCDTS-HD DTS-ES Discrete See below Mode GroupTuner Setting to be off DTS StereoTable A10 - Remote Control Function List 50 51 54 55DVD AUX Table A13 Remote Control Product Codes CD Table A11 Remote Control Product Codes TVTable A12 Remote Control Product Codes VCR Table A17 Remote Control Product Codes Cable Table A14 Remote Control Product Codes DVDTable A15 Remote Control Product Codes SAT Memory Troubleshooting GuideProcessor Reset AM Tuner Section Technical SpecificationsFM Tuner Section Video Section

AVR 160 specifications

The Harman-Kardon AVR 160 is a versatile and powerful audio/video receiver that delivers a remarkable home theater experience. Designed for audio enthusiasts and casual listeners alike, this model combines cutting-edge technology, sophisticated design, and intuitive controls.

One of the standout features of the AVR 160 is its robust 7.1-channel surround sound output, which supports the latest audio formats including Dolby TrueHD and DTS-HD Master Audio. This allows users to enjoy a truly immersive sound experience when watching movies or playing video games. With a total power output of 75 watts per channel, the AVR 160 ensures that every sound detail is crystal clear, from explosive action sequences to the softest dialogue.

Another significant aspect of the AVR 160 is its advanced connectivity options. It comes equipped with multiple HDMI inputs, allowing you to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI 1.4 version support ensures compatibility with 3D video and offers audio return channel (ARC) functionality, simplifying connections with your TV. Additionally, the receiver features wide compatibility with legacy devices through analog audio inputs, as well as USB ports for direct playback of your music collections.

The AVR 160 also includes Harman's proprietary technology, like the EZSet/EQ automatic speaker calibration system. This feature effortlessly optimizes speaker performance by analyzing the acoustic properties of your room and adjusting settings accordingly. Users can also benefit from the integrated SiriusXM and Spotify support, allowing streaming of music directly through the receiver.

In terms of design, the AVR 160 presents a sleek aesthetic that complements any home entertainment setup. The minimalist front panel, with its bright display and easy-to-use controls, makes operation straightforward. Whether you are adjusting settings or selecting inputs, the receiver’s user-friendly interface enhances the overall experience.

In conclusion, the Harman-Kardon AVR 160 is an exceptional receiver that boasts remarkable audio quality, extensive connectivity options, innovative technologies, and a stylish design. Whether you're a movie enthusiast, music lover, or gaming aficionado, this receiver is well-equipped to meet diverse entertainment needs and elevate your audio experience to new heights.
Top Page Image Contents