Install the Faucet, Where codes permit | GE GNSV75RWW, GNSV70RBL

Installation Instructions

COLD WATER SUPPLY FITTING (CONT.)

B. OPTIONAL HOME INSTALLATION

(Where codes permit)

Saddle Valve: Saddle valve must be able to connect with 1/4-inch tubing supplied with the system. Not supplied with product; check your local hardware or home service store for product. Saddle valve typically requires 1/2″

OD tubing or larger.

NOTE: Codes in the state of Massachusetts require installation by a licensed plumber and do not permit the use of the saddle valve. For installation, use plumbing code 248-CMR of the Commonwealth of Massachusetts.

1.Turn off the cold water supply and install saddle valve as required by product selection. (Be sure to follow manufacturer’s installation instructions.)

DANGER — If hole is required to be drilled in pipe, to protect yourself from serious injury or fatal shock, use a battery-powered hand drill only to make the hole. DO NOT USE AN ELECTRIC DRILL.

2.Open saddle valve after complete system has been installed.

C. OPTIONAL INSTALLATION

(For installation with rigid pipe between supply valve and sink faucet)

Option 1

1.Remove pipe from supply valve and sink faucet .

2.Obtain flexible pipe sized to your plumbing.

3.Install flexible pipe.

4.Go back to A. Preferred Installation section step 3.

Option 2

1.Obtain compression fittings to fit rigid pipe.

2.Obtain any other fittings required to connect compression fittings to feed water adapter.

3.Remove pipe from supply valve.

4.Cut pipe to fit length of assembled fittings and adapter.

5.Install compression fitting to pipe.

6.Go back to A. Preferred Installation section step 3.

NOTE: Above described materials are not included with the product.

INSTALL THE FAUCET

Be sure there is room underneath and above the sink to make the needed connections. Before starting, make sure there is sufficient room for the faucet base and unit . Select one of the following places to install the faucet:

A. In an existing sink spray attachment or soap dispenser hole.

B. In a hole to be drilled in the sink top.

C. In a hole to be drilled in the countertop, next to the sink.

NOTES:

•Be sure the faucet base will fit flat against the surface at the selected location so the bottom gasket between the base and surface area will seal.

•Make sure to leave enough clearance at the back of the faucet in case you need to remove it.

Installation Steps (refer to illustration below for clarification)

1.If drilling is needed, make a 1″ diameter hole.

Be sure to use the proper procedure for drilling porcelain or stainless steel. Special drill bits may be needed. Consult a qualified plumber for the proper procedure.

CAUTION:When drilling in Stainless Steel, the edges may be sharp and could puncture the tube. Be careful to not cut yourself or damage the tube.

2.Remove the faucet body and base by turning the base counterclockwise.

3.Remove the butterfly bracket from the screw. Then insert the screw into the top of the base and reattach the butterfly bracket .

4.Align the gasket to cover the hole completely. Then place the butterfly bracket on the base into the hole.

Screw

Base

Sink Gasket

Butterfly Bracket

5.Tighten the screw to secure the butterfly bracket to the underside of the sink top. The base should be firmly in place and should not wobble or turn.

GNSV75RWW, GNSV70RBL specifications

The GE GNSV70RBL and GNSV75RWW are two cutting-edge refrigerator models from General Electric, designed to meet the demands of modern kitchens while providing exceptional performance and convenience. These appliances embody GE's commitment to innovation, quality, and style, making them an excellent choice for consumers seeking reliable refrigeration solutions.

The GNSV70RBL, featuring a sleek black stainless-steel finish, combines aesthetic appeal with functionality. With a spacious capacity of 24.9 cubic feet, it offers ample storage for groceries and household items. This model incorporates an advanced cooling system, ensuring that food remains fresher for longer periods. The Energy Star certification means that it operates efficiently, minimizing energy costs while being environmentally responsible.

On the other hand, the GNSV75RWW presents a classic white finish, bringing a timeless look to any kitchen. It also boasts a generous capacity of 25.3 cubic feet, providing even more room for food storage. Both models utilize a GeoCool technology that maintains optimal humidity levels, preventing freezer burn and preserving the taste and texture of food.

One of the standout features of both units is their adjustable shelving and door bins. This versatility allows users to customize the storage layout according to their needs. Additionally, the LED lighting inside provides bright illumination, making it easy to find items, while saving energy compared to traditional bulbs.

The GNSV70RBL and GNSV75RWW incorporate user-friendly digital controls that make it simple to adjust temperature settings and monitor the appliance’s performance. The models also include advanced filtration systems, which help to ensure clean, fresh ice and water, enhancing the overall user experience.

Another essential characteristic of both refrigerators is their quiet operation. Designed with noise-reduction technologies, they offer a peaceful environment in the kitchen and adjoining living spaces, which is particularly important for open-plan homes.

Overall, the GE GNSV70RBL and GNSV75RWW represent an excellent blend of style and functionality. With their modern features, energy efficiency, and practicality, they cater to a wide range of consumer preferences, making them top choices for those in search of reliable refrigeration solutions that enhance everyday living.