Brother HS 2000, EN 1470 operation manual Using Your Sewing Machine, Power supply precautions

Page 11

USING YOUR SEWING MACHINE

Power supply precautions

1

 

Be sure to observe the following precautions concerning the power supply.

WARNING

●Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine.

●Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power supply jack on the machine.

●Do not insert the plug on the power cord into an electrical outlet that is in poor condition.

●Turn off the main power and remove the plug in the following circumstances:

•When you are away from the machine

•After using the machine

•When the power fails during use

•When the machine does not operate correctly due to a bad connection or a disconnection

•During electrical storms

CAUTION

●Use only the power cord included with this machine.

●Do not use extension cords or multi-plug adapters with many other appliances plugged in to them. Fire or electric shock may result.

●Do not touch the plug with wet hands. Electric shock may result.

●When unplugging the machine, always turn off the main power first. Always grasp the plug to remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.

●Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the cord and cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized dealer for repairs before continuing use.

●Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a fire may result.

Power supply

aInsert the plug into a wall outlet.

aMain power switch

bJack/socket connector

bSet the main power switch to “I”.

XThe sewing lamp comes on when the machine is turned on.

cTo turn off the machine, set the main power switch to “{”.

XThe sewing lamp goes off when the machine is turned off.

Note

●If a power outage occurs while the sewing machine is being operated, turn off the sewing machine and unplug the power

supply cord. When restarting the sewing machine, follow the necessary procedure to correctly operate the machine.

(For U.S.A. only)

●This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Computerized Sewing Machine Important Safety Instructions For a longer service life For Users in the UK, EIRE, Malta and Cyprus only For repair or adjustmentContents Utility Stitches Main parts Names of Machine Parts and Their FunctionsButtons provided on some models Needle and presser foot sectionOperation buttons ASlideopen theit. flat bed attachment to the left to Operation panelFlat bed attachment Optional accessories AccessoriesCTo turn off the machine, set the main power switch to Using Your Sewing MachinePower supply precautions BSet the main power switch toSide of stitch selection key Foot controllerChanging the needle stop position ETurn on the sewing machine Threading the MachineWinding the bobbin GTrim the excess thread above the bobbin Thread is cut to a suitable length For models equipped with the fast bobbin winding systemCSlide the bobbin winder shaft to the right Lower threading For models equipped with the quick-set bobbin Upper threading Thread take-up lever ECatch the thread on the hook as shown below Fully lower the needle threader leverGthe needle toward the back of the sewing MachineBobbin cover should still be removed Drawing up the lower threadFor models equipped with the quick-set bobbin ALightly hold the end of the upper threadThis section provides information on sewing machine needles Needle precautionsReplacing the Needle Needle types and their usesIncorrect needle Checking the needleReplacing the needle Correct needleInstall the twin needle in the same way Installing the needle clampTwin needle threading Sewing with a twin needleMark on the wheel points up. With models Replacing the Presser FootReplacing the presser foot Replace the presser foot as described belowARemove the presser foot Removing the presser foot holderRemoving the presser foot holder Attaching the presser foot holderSewing General sewing procedureFollow the basic procedures below to sew CAttach the presser foot indicated in the LCD DIfwidth.necessary, adjust the stitch lengthSelecting stitching ATurn on the sewing machineBRaise the presser foot lever Starting to sewOn the wheel points up. With models equipped Upper tension is too tight Thread tensionSewing reinforcement stitches Correct tensionUpper tension is too loose Thread correctly. For details, refer to page 14Sewing curves Useful Sewing TipsTrial sewing Changing the sewing directionSewing hook-and-loop fastener ASlidereleasetheit.flat bed attachment to the left to Using a free-arm styleSewing thin fabrics Sewing stretch fabricsFor details, refer to Selecting stitching Overcasting StitchesRev. Reverse Rfc. Reinforcement Attach overcasting foot G or zigzag foot J Select a stitchFor details, refer to Starting to sew FWhen sewing is finished, cut the threadBasic Stitching Basic stitchingDFold back the fabric inside along the basting Blind HEM StitchingAReverse the skirt or pants Arm If the needle does not catch the hem fold Auto Rfc Buttonhole SewingButtonholes can be sewn and buttons can be sewn on If the button does not fit in the button guide plate Size of the buttonhole is setFPullpossible.down the buttonhole lever as far as CAttach presser foot M Button sewingSewing buttonholes on stretch fabrics Trim off any excess of the gimp threadNormally, the feed dog position lever is Positioned at ESelect a stitchWith stitch Select stitch After sewing for about 10 seconds at lowRev. Reverse Zipper InsertionElastic attaching Sewing Stretch Fabrics and Elastic TapeStretch stitching Appliqués APPLIQUÉ, Patchwork and Quilt StitchingDCarefully sew around the edge of the design Edge of the fabric, and sew using stitchPiecing Patchwork crazy quilt stitchingFor details, refer to Removing the presser foot holder Using the optional quilting guideQuilting ABaste the fabric to be quiltedDSlide the feed dog position lever, located at Free-motion quiltingRfc. Reinforcement **Auto Rfc. Automatic Reinforcement Reinforcement StitchingTriple stretch stitching Bar tack stitchingEPullpossible.down the buttonhole lever as far as Decorative Stitching Fabric.3 FagotingScallop stitching AAttach monogramming foot N BSelect stitchDPull the bobbin threads to create gathers SmockingShell tuck stitching CSew parallel stitching at intervals of 1 cm 3/8 inchDStart sewing JoiningHeirloom stitching Utility stitches Stitch SettingsRfc. Reinforcement Pattern No Rfc Binding Appendix Cleaning the bobbin case MaintenanceCleaning the machine surface Do not put oil on the bobbin case ERemove the bobbin caseGrasp the bobbin case, and then pull it out Troubleshooting Wrong side LowerOr breaks Thread is Tangled onSkipped Fabric isWrinkled Stitches areOperation beep for models equipped with the operation beep Error MessagesNumerics Index31, 34 Page English 885-S38 XE3669-001

HS 2000, EN 1470 specifications

The Brother EN 1470 and HS 2000 are innovative sewing machines that cater to both beginners and experienced sewers alike, offering a host of features and advanced technologies to enhance the sewing experience.

One of the standout features of the Brother EN 1470 is its user-friendly interface, designed with simplicity in mind. This machine offers a wide variety of built-in stitches, allowing users to explore different patterns and styles. With over 100 stitch options, including decorative, utility, and heirloom stitches, the EN 1470 provides immense creative flexibility. The automatic needle threader is another highlight, significantly reducing setup time and enhancing convenience.

The HS 2000, while distinct, shares a similar commitment to usability. It features a robust sewing speed, capable of handling various fabrics, from lightweight materials to heavy-duty textiles. The machine comes equipped with an advanced sewing assist guide, which helps users make quick decisions about settings for specific fabrics and stitch types. Additionally, the HS 2000 has a top-loading bobbin system that simplifies the bobbin change process, ensuring a smooth sewing experience without frustrating interruptions.

Both machines incorporate Brother's advanced technology, including the LED lighting that illuminates the sewing area, allowing for precision work, even in low-light conditions. The ergonomic design also promotes comfortable handling, making lengthy sewing projects less tiring.

Another essential characteristic of the EN 1470 and HS 2000 is their versatility. They accommodate a range of presser feet, which allows for a multitude of sewing techniques such as quilting, zippers, and buttonholes. The built-in buttonhole function is automatic in both models, further simplifying the sewing process while achieving professional results.

Durability is key to the appeal of these machines. Crafted with high-quality materials, they can withstand the demands of regular use. Their compact size and lightweight nature make them portable, perfect for sewing enthusiasts who like to take their work on the go.

In conclusion, the Brother EN 1470 and HS 2000 stand out in the market for their combination of user-friendly features, advanced technologies, and durability. Whether you are a beginner looking to explore the world of sewing or a seasoned professional seeking a reliable machine, both models provide an excellent platform to bring your creative visions to life.
Top Page Image Contents