Brother CS 100T operation manual Fagoting, Scallop stitching, DTrim along the stitches

Page 51

Fagoting

Stitching across an open seam is called “fagoting”. It is used on blouses and children's clothing. This stitch is more decorative when thicker thread is used.

aUse an iron to fold the two pieces of fabric along their seams.

bBaste the two pieces of fabric, separated by about 4.0 mm (3/16 inch), onto thin paper or a sheet of water-soluble stabilizer.

3

1

2

aThin paper or water soluble stabilizer

bBasting stitching

c4 mm (3/16 inch)

cAttach zigzag foot “J”.

dSelect stitch or .

eSet the stitch width to 7.0 mm (1/4 inch).

•For details, refer to “Selecting stitching” (page 27).

fSew with the center of the presser foot aligned along the center of the two pieces of fabric.

gAfter sewing is finished, remove the paper.

Scallop stitching

The wave-shaped repeating pattern that looks like shells is called “scalloping”. It is used on the collars of blouses and to decorate the edges of handkerchiefs.

aAttach monogramming foot “N”.

 

bSelect stitch .

 

Stitch along the edge of the fabric, making

 

csure not to sew directly on the edge of the

3

fabric.

•For better results, apply spray starch onto the fabric and press with a hot iron before it is sewn.

dTrim along the stitches.

• Be careful not to cut the stitches.

49

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Computerized Sewing Machine Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only For safe operation For a longer service lifeContents Utility Stitches Main parts Names of Machine Parts and Their FunctionsNeedle and presser foot section Operation buttonsButtons provided on some models Operation panel Flat bed attachmentASlideopen theit. flat bed attachment to the left to Optional accessories AccessoriesCTo turn off the machine, set the main power switch to Using Your Sewing MachinePower supply precautions BSet the main power switch toChanging the needle stop position Foot controllerETurn on the sewing machine Threading the MachineWinding the bobbin Pass the thread around the pre-tension diskGTrim the excess thread above the bobbin CSlide the bobbin winder shaft to the right For models equipped with the fast bobbin winding systemActual size 11.5mm 7/16 inch This model Lower threadingFor models equipped with the quick-set bobbin Right side see arrow b until the cover clicks into placeUpper threading Thread take-up lever Catch the thread on the hook as shown below DFully lower the needle threader leverDrawing up the lower thread For models equipped with the quick-set bobbinLightly hold the end of the upper thread Fabrics Needle precautionsReplacing the Needle Needle types and their usesIncorrect needle Checking the needleReplacing the needle Correct needleInstalling the needle clamp Twin needle threading Sewing with a twin needleReplacing the Presser Foot Replacing the presser footMark on the wheel points up. With models Remove the presser foot Removing the presser foot holderRemoving the presser foot holder Attaching the presser foot holderSewing General sewing procedureCAttach the presser foot DIfwidth.necessary, adjust the stitch lengthSelecting stitching Turn on the sewing machineStarting to sew On the wheel points up. With models equippedBRaise the presser foot lever Upper tension is too tight Thread tensionSewing reinforcement stitches Correct tensionSewing curves Useful Sewing TipsTrial sewing Changing the sewing directionSlide the flat bed attachment to the left to release it Using a free-arm styleSewing thin fabrics Sewing stretch fabricsAttach overcasting foot G or zigzag foot J Select a stitch Overcasting StitchesChanging the needle position When sewing is finished, cut the threadBasic Stitching Basic stitchingBlind HEM Stitching BAttach blind hem foot R CSelect a stitchIf the needle does not catch the hem fold Buttonholes can be sewn and buttons can be sewn on Buttonhole SewingIf the button does not fit in the button guide plate Size of the buttonhole is setFPullpossible.down the buttonhole lever as far as Button sewing Sewing buttonholes on stretch fabricsCAttach presser foot M With stitch Select stitch ESelect a stitchRev. Reverse Zipper InsertionSewing Stretch Fabrics and Elastic Tape Stretch stitchingElastic attaching Appliqués APPLIQUÉ, Patchwork and Quilt StitchingPiecing Patchwork crazy quilt stitchingDSelect stitch , or Using the optional quilting guideQuilting Baste the fabric to be quiltedGAfter sewing is finished, slide the feed dog Free-motion quiltingAttach zigzag foot J Select stitch Start sewing Reinforcement StitchingTriple stretch stitching Bar tack stitchingPullpossible.down the buttonhole lever as far as Once sewing is completed,Decorative Stitching Fagoting Scallop stitchingDTrim along the stitches DPull the bobbin threads to create gathers SmockingShell tuck stitching Sew parallel stitching at intervals of 1 cm 3/8 inchJoining Heirloom stitchingUnfold the fabric, and then iron the tucks down to one side Utility stitches Stitch SettingsRfc. Reinforcement Decorative Stitch Buttonhole Bar tack Rfc Binding Appendix Maintenance Cleaning the machine surfaceCleaning the bobbin case Remove the bobbin case Troubleshooting Fabric is LowerOr breaks Thread tenPitched noise While sewing Stitches areSkipped There is a highOperation beep for models equipped with the operation beep Error MessagesNumerics Index30, 32 English 885-S33/S34/S36/S37 XC8835-3215

CS 100T specifications

The Brother CS 100T is a versatile and user-friendly sewing machine, designed to cater to both budding sewists and experienced crafters alike. With its lightweight build and robust features, the CS 100T has become a popular choice for those looking to explore their creative side, tackle household projects, or even dive into garment making.

One of the main features that sets the Brother CS 100T apart is its impressive selection of built-in stitches. The machine offers 100 stitch options, including decorative, utility, and quilting stitches. This variety allows users to experiment with different techniques and styles, ensuring that every project can be personalized to their liking. The easy-to-use stitch selector makes navigating through the options a breeze, making it ideal for all skill levels.

The CS 100T is equipped with an automatic needle threader, which takes the hassle out of threading the needle and saves valuable time. Additionally, the top drop-in bobbin system allows for easy bobbin changes, reducing downtime and keeping your sewing project flowing smoothly. This machine also includes a speed control feature, enabling users to adjust the sewing speed according to their comfort and skill level.

Another key technology incorporated in the Brother CS 100T is the built-in monogramming feature. With the ability to create customized letters and numbers, this machine allows users to personalize their projects, making it an excellent choice for gifts or special occasions. Furthermore, the machine comes with various presser feet, including a zipper foot and buttonhole foot, allowing for greater versatility in sewing techniques.

Its lightweight design, weighing in at just under ten pounds, makes the CS 100T highly portable, allowing users to easily transport it for sewing classes or crafting gatherings. The strong construction and durable materials ensure that it can withstand regular use while still producing high-quality results.

In terms of characteristics, the Brother CS 100T is designed for ease of use. The intuitive layout includes a bright LED light that illuminates the sewing area, providing better visibility during projects. The stitch length and width can be adjusted, giving users more control over their creations.

Overall, the Brother CS 100T is a feature-rich sewing machine that combines ease of use, versatility, and advanced technology. Whether you’re a beginner looking to learn the basics or an experienced sewist in need of a reliable machine, the CS 100T offers a wide range of capabilities to inspire creativity and enhance your sewing experience.
Top Page Image Contents