Brother 885-S25/S27 operation manual Hook Thread

Page 25

4Pull down the needle threader lever as much as possible, and then turn the lever toward the back of the machine (away from you). Make sure that the hook passes through the eye of the needle and grabs the thread.

2

1 1

1Hook

2 Thread

•Hold the thread in front of the needle to make sure that the hook grabs it.

5While lightly holding the thread, turn the needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle.

6Raise the needle threader lever and pull out about 5 cm (2 inch) of thread through the needle toward the back of the sewing machine.

1

CAUTION

●The needle threader can only be used with home sewing machine needles size 75/11-100/16. Check the table on page 26 for the appropriate needle and thread combinations. If you are using transparent nylon mono-filament thread, you can only use needles in the range of 90/14-100/16.

●You can not use the needle threader if you are using decorative threads or special needles, such as the twin needle and wing needle.

When using these needles or threads you will need to thread the needle by hand. Make sure the main power switch is off when threading.

23

Image 25

Contents Appendix Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Please Read These Instructions Before YOU USE the Machine UNPACKING/REPACKING InstructionsContents Appendix Main Parts Knowing Your Sewing MachineOptional Accessories AccessoriesConnecting Plugs Using Your Sewing MachineFoot Controller Main Power and Sewing Light SwitchChecking the Needle Replacing the NeedleTouches the stopper, and securely tighten Changing the Presser FootFlat Bed Attachment Using a Free-arm Style1Slideopen theit. flat bed attachment to the left to 1Slide the flat bed attachment to the left to release itPattern Selection Dial ControlsStitches Pattern Recommended Instruction Patterns and Stitch NamesWidth Manual3/16 Fixed 3/32 Stitch Length Dial Stitch Width Dial Stretch StitchingReverse Sewing Lever Stitches Selecting a Stretch StitchWinding the Bobbin Threading the MachineWound evenly Wound poorly Lower Threading Lower Threading for models equipped with a quick-set bobbin Follow steps 1 and 2 from Lower Threading Upper Threading Raise the presser foot using the presser foot lever6Putneedle.the thread behind the guide above Hook Thread Sewing with a Twin Needle Drawing up the Lower ThreadThread Tension Fabric Type Thread Size of Needle FABRIC, THREAD, and Needle CombinationsSize MediumStraight Stitching Please Read Before SewingPattern Fixed 16-0Stitch Stitch Name Zigzag StitchingZigzag Stitch Zigzag StitchShell Tuck Stitching Blind Hem StitchingStitch 3/164Sew at a slow speed Elastic StitchingElastic Stitch Patchworking Double Action StitchingOveredge Stitching StitchTriple Zigzag Stretch Stitching Feather StitchingFixed 3/16 Decorative Stitching Stitch Pattern Making a ButtonholePattern Adjusting Buttonholes Other Sewing ButtonsZipper Insertion Using Attachments and ApplicationsDarning GatheringFoot Stitch AnyMonogramming Embroidering AppliquésStitch Width Zigzag Stitch AnyKeep fingers away from moving parts, especially needles Using the Walking Foot Optional AccessoriesStitch Plate Using the Quilting Foot16-3/32 Using the 1/4-inch Quilting FootQuickly Stitch Together a Quilt Cleaning MaintenanceChanging the Light Bulb Put the light cover back on and fasten the screw0Install the needle plate cover Symptom Possible cause How to put it right Reference TroubleshootingOr breaks LowerThread ten Fabric isSkipped Stitches areThere is a high Pitched noise While sewingNumerics IndexEnglish